mbox series

[v2,0/2] ath10k: correct tx bitrate for QCA6174/QCA9377/QCA9888

Message ID 20191119002028.2519-1-root@vento-sdc-01.qualcomm.com (mailing list archive)
Headers show
Series ath10k: correct tx bitrate for QCA6174/QCA9377/QCA9888 | expand

Message

root Nov. 19, 2019, 12:20 a.m. UTC
From: Yu Wang <yyuwang@codeaurora.org>

Tx bitrate got by command 'iw wlan0 link' is incorrect.
These 2 patches will fix the issue.

Changes from v1:
[PATCH v2] ath10k: correct legacy rate in tx stats
Remove wmi ops for getting legacy rate, instead, update the ratecode got from
PPDU stats, to align with the existing tx rate processing.

Yu Wang (2):
  ath10k: add ppdu stats support for QCA6174/QCA9377
  ath10k: correct legacy rate in tx stats

 drivers/net/wireless/ath/ath10k/htt.c     |   2 +
 drivers/net/wireless/ath/ath10k/htt.h     |  30 ++++++
 drivers/net/wireless/ath/ath10k/htt_rx.c  | 146 +++++++++++++++++++++++++++++-
 drivers/net/wireless/ath/ath10k/mac.c     |   2 +-
 drivers/net/wireless/ath/ath10k/mac.h     |   1 +
 drivers/net/wireless/ath/ath10k/wmi-tlv.c |   4 +
 drivers/net/wireless/ath/ath10k/wmi-tlv.h |   3 +
 7 files changed, 186 insertions(+), 2 deletions(-)