diff mbox

ath10k: Disable TX_STBC for tx chainmask of 1

Message ID 1466081713-8122-1-git-send-email-mohammed@qca.qualcomm.com (mailing list archive)
State Accepted
Commit 34663241d81f9d2a8e3730f3f3973adfcb913b83
Delegated to: Kalle Valo
Headers show

Commit Message

Mohammed Shafi Shajakhan June 16, 2016, 12:55 p.m. UTC 
From: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>

Disable TX_STBC for both HT and VHT if the devices tx chainmask is '1'
TX_STBC is required only for devices with tx_chainmask > 1. This fixes
a ping failure for QCA9887 (1x1) in HT/VHT mode

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

Comments

Kalle Valo June 30, 2016, 11:01 a.m. UTC | #1 
Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> wrote:
> From: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
> 
> Disable TX_STBC for both HT and VHT if the devices tx chainmask is '1'
> TX_STBC is required only for devices with tx_chainmask > 1. This fixes
> a ping failure for QCA9887 (1x1) in HT/VHT mode
> 
> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>

Thanks, 1 patch applied to ath-next branch of ath.git:

34663241d81f ath10k: disable TX_STBC for tx chainmask of 1
diff mbox

Patch

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 1fe33c36..5e40922 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -4224,6 +4224,9 @@  static struct ieee80211_sta_vht_cap ath10k_create_vht_cap(struct ath10k *ar)
 			mcs_map |= IEEE80211_VHT_MCS_NOT_SUPPORTED << (i * 2);
 	}
 
+	if (ar->cfg_tx_chainmask <= 1)
+		vht_cap.cap &= ~IEEE80211_VHT_CAP_TXSTBC;
+
 	vht_cap.vht_mcs.rx_mcs_map = cpu_to_le16(mcs_map);
 	vht_cap.vht_mcs.tx_mcs_map = cpu_to_le16(mcs_map);
 
@@ -4261,7 +4264,7 @@  static struct ieee80211_sta_ht_cap ath10k_get_ht_cap(struct ath10k *ar)
 		ht_cap.cap |= smps;
 	}
 
-	if (ar->ht_cap_info & WMI_HT_CAP_TX_STBC)
+	if (ar->ht_cap_info & WMI_HT_CAP_TX_STBC && (ar->cfg_tx_chainmask > 1))
 		ht_cap.cap |= IEEE80211_HT_CAP_TX_STBC;
 
 	if (ar->ht_cap_info & WMI_HT_CAP_RX_STBC) {