| Message ID | 1522379899-31969-1-git-send-email-wgong@codeaurora.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi, On Fri, Mar 30, 2018 at 11:18:19AM +0800, Wen Gong wrote: > When trying to set wow wakeup patterns it fails with this command: > > iw phyxx wowlan enable patterns offset xx+ IP address xx.xx.xx.xx > > The reason is that the wow pattern from upper layer is in 802.3 format > for this case, it need to convert it to 802.11 format. The input > offset parameter is used for 802.3, but the actual offset firmware > need depends on rx_decap_mode, so that it needs to be recalculated. > Pattern of 802.3 packet is not same with 802.11 packet. If the > rx_decap_mode is ATH10K_HW_TXRX_NATIVE_WIFI, then firmware will > receive data packet with 802.11 format from hardware. > > Convert graph: > ----------------------------------------------------------------------- > 802.3 |dest mac(6B)|src mac(6B)|type(2B)| body... | > |__ |_______ |_____________ |___________ > | | | | > 802.11 |4B|dest mac(6B)| 6B |src mac(6B)| 8B |type(2B)| body... | > ----------------------------------------------------------------------- It feels like this could go into the code comments? Or at least some short version of it. (But hey, text is cheap, and who doesn't love ASCII art?) > > Tested with QCA6174 hw3.0 with firmware > WLAN.RM.4.4.1-00099-QCARMSWPZ-1, but this will also affect QCA9377. > This has always failed, so it's not a regression with new firmware > releases. > > Signed-off-by: Wen Gong <wgong@codeaurora.org> > --- > drivers/net/wireless/ath/ath10k/wmi.h | 4 ++ > drivers/net/wireless/ath/ath10k/wow.c | 128 ++++++++++++++++++++++++++++++++-- > 2 files changed, 126 insertions(+), 6 deletions(-) > > diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h > index c7b30ed..389f9c7 100644 > --- a/drivers/net/wireless/ath/ath10k/wmi.h > +++ b/drivers/net/wireless/ath/ath10k/wmi.h > @@ -6724,6 +6724,10 @@ struct wmi_wow_ev_arg { > #define WOW_MIN_PATTERN_SIZE 1 > #define WOW_MAX_PATTERN_SIZE 148 > #define WOW_MAX_PKT_OFFSET 128 > +#define WOW_HDR_LEN (sizeof(struct ieee80211_hdr_3addr) + \ > + sizeof(struct rfc1042_hdr)) > +#define WOW_MAX_REDUCE (WOW_HDR_LEN - sizeof(struct ethhdr) - \ > + offsetof(struct ieee80211_hdr_3addr, addr1)) > > enum wmi_tdls_state { > WMI_TDLS_DISABLE, > diff --git a/drivers/net/wireless/ath/ath10k/wow.c b/drivers/net/wireless/ath/ath10k/wow.c > index c4cbccb..9b56a41 100644 > --- a/drivers/net/wireless/ath/ath10k/wow.c > +++ b/drivers/net/wireless/ath/ath10k/wow.c > @@ -1,5 +1,6 @@ > /* > * Copyright (c) 2015-2017 Qualcomm Atheros, Inc. > + * Copyright (c) 2018, The Linux Foundation. All rights reserved. > * > * Permission to use, copy, modify, and/or distribute this software for any > * purpose with or without fee is hereby granted, provided that the above > @@ -76,6 +77,98 @@ static int ath10k_wow_cleanup(struct ath10k *ar) > return 0; > } > > +static void ath10k_wow_convert_8023_to_80211 > + (struct cfg80211_pkt_pattern *new, > + const struct cfg80211_pkt_pattern *old) > +{ > + u8 hdr_8023_pattern[ETH_HLEN] = {}; > + u8 hdr_8023_bit_mask[ETH_HLEN] = {}; > + u8 hdr_80211_pattern[WOW_HDR_LEN] = {}; > + u8 hdr_80211_bit_mask[WOW_HDR_LEN] = {}; > + > + int total_len = old->pkt_offset + old->pattern_len; > + int hdr_80211_end_offset; > + > + struct ieee80211_hdr_3addr *new_hdr_pattern = > + (struct ieee80211_hdr_3addr *)hdr_80211_pattern; > + struct ieee80211_hdr_3addr *new_hdr_mask = > + (struct ieee80211_hdr_3addr *)hdr_80211_bit_mask; > + struct ethhdr *old_hdr_pattern = (struct ethhdr *)hdr_8023_pattern; > + struct ethhdr *old_hdr_mask = (struct ethhdr *)hdr_8023_bit_mask; > + int hdr_len = sizeof(*new_hdr_pattern); > + > + struct rfc1042_hdr *new_rfc_pattern = > + (struct rfc1042_hdr *)(hdr_80211_pattern + hdr_len); > + struct rfc1042_hdr *new_rfc_mask = > + (struct rfc1042_hdr *)(hdr_80211_bit_mask + hdr_len); > + int rfc_len = sizeof(*new_rfc_pattern); > + > + memcpy(hdr_8023_pattern + old->pkt_offset, > + old->pattern, ETH_HLEN - old->pkt_offset); > + memcpy(hdr_8023_bit_mask + old->pkt_offset, > + old->mask, ETH_HLEN - old->pkt_offset); > + > + /* Copy destination address */ > + memcpy(new_hdr_pattern->addr1, old_hdr_pattern->h_dest, ETH_ALEN); > + memcpy(new_hdr_mask->addr1, old_hdr_mask->h_dest, ETH_ALEN); > + > + /* Copy source address */ > + memcpy(new_hdr_pattern->addr3, old_hdr_pattern->h_source, ETH_ALEN); > + memcpy(new_hdr_mask->addr3, old_hdr_mask->h_source, ETH_ALEN); > + > + /* Copy logic link type */ > + memcpy(&new_rfc_pattern->snap_type, > + &old_hdr_pattern->h_proto, > + sizeof(old_hdr_pattern->h_proto)); > + memcpy(&new_rfc_mask->snap_type, > + &old_hdr_mask->h_proto, > + sizeof(old_hdr_mask->h_proto)); > + > + /* Caculate new pkt_offset */ > + if (old->pkt_offset < ETH_ALEN) > + new->pkt_offset = old->pkt_offset + > + offsetof(struct ieee80211_hdr_3addr, addr1); > + else if (old->pkt_offset < offsetof(struct ethhdr, h_proto)) > + new->pkt_offset = old->pkt_offset + > + offsetof(struct ieee80211_hdr_3addr, addr3) - > + offsetof(struct ethhdr, h_source); > + else > + new->pkt_offset = old->pkt_offset + hdr_len + rfc_len - ETH_HLEN; > + > + /* Caculate new hdr end offset */ > + if (total_len > ETH_HLEN) > + hdr_80211_end_offset = hdr_len + rfc_len; > + else if (total_len > offsetof(struct ethhdr, h_proto)) > + hdr_80211_end_offset = hdr_len + rfc_len + total_len - ETH_HLEN; > + else if (total_len > ETH_ALEN) > + hdr_80211_end_offset = total_len - ETH_ALEN + > + offsetof(struct ieee80211_hdr_3addr, addr3); > + else > + hdr_80211_end_offset = total_len + > + offsetof(struct ieee80211_hdr_3addr, addr1); > + > + new->pattern_len = hdr_80211_end_offset - new->pkt_offset; > + > + memcpy((u8 *)new->pattern, > + hdr_80211_pattern + new->pkt_offset, > + new->pattern_len); > + memcpy((u8 *)new->mask, > + hdr_80211_bit_mask + new->pkt_offset, > + new->pattern_len); > + > + if (total_len > ETH_HLEN) { > + /* Copy frame body */ > + memcpy((u8 *)new->pattern + new->pattern_len, > + (void *)old->pattern + ETH_HLEN - old->pkt_offset, > + total_len - ETH_HLEN); > + memcpy((u8 *)new->mask + new->pattern_len, > + (void *)old->mask + ETH_HLEN - old->pkt_offset, > + total_len - ETH_HLEN); > + > + new->pattern_len += total_len - ETH_HLEN; > + } > +} > + > static int ath10k_vif_wow_set_wakeups(struct ath10k_vif *arvif, > struct cfg80211_wowlan *wowlan) > { > @@ -116,22 +209,39 @@ static int ath10k_vif_wow_set_wakeups(struct ath10k_vif *arvif, > > for (i = 0; i < wowlan->n_patterns; i++) { > u8 bitmask[WOW_MAX_PATTERN_SIZE] = {}; > + u8 ath_pattern[WOW_MAX_PATTERN_SIZE] = {}; > + u8 ath_bitmask[WOW_MAX_PATTERN_SIZE] = {}; So now we've got 3 * 148 = 444 bytes on the stack just for this? Seems like it's getting a little large for kernel code, but maybe not too bad. I guess we can go with this until somebody runs into a real problem... Otherwise, seems to work for me: Tested-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Brian Norris <briannorris@chromium.org> > + struct cfg80211_pkt_pattern new_pattern = {}; > + struct cfg80211_pkt_pattern old_pattern = patterns[i]; > int j; > - > + new_pattern.pattern = ath_pattern; > + new_pattern.mask = ath_bitmask; > if (patterns[i].pattern_len > WOW_MAX_PATTERN_SIZE) > continue; > - > /* convert bytemask to bitmask */ > for (j = 0; j < patterns[i].pattern_len; j++) > if (patterns[i].mask[j / 8] & BIT(j % 8)) > bitmask[j] = 0xff; > + old_pattern.mask = bitmask; > + new_pattern = old_pattern; > + > + if (ar->wmi.rx_decap_mode == ATH10K_HW_TXRX_NATIVE_WIFI) { > + if (patterns[i].pkt_offset < ETH_HLEN) > + ath10k_wow_convert_8023_to_80211(&new_pattern, > + &old_pattern); > + else > + new_pattern.pkt_offset += WOW_HDR_LEN - ETH_HLEN; > + } > + > + if (WARN_ON(new_pattern.pattern_len > WOW_MAX_PATTERN_SIZE)) > + return -EINVAL; > > ret = ath10k_wmi_wow_add_pattern(ar, arvif->vdev_id, > pattern_id, > - patterns[i].pattern, > - bitmask, > - patterns[i].pattern_len, > - patterns[i].pkt_offset); > + new_pattern.pattern, > + new_pattern.mask, > + new_pattern.pattern_len, > + new_pattern.pkt_offset); > if (ret) { > ath10k_warn(ar, "failed to add pattern %i to vdev %i: %d\n", > pattern_id, > @@ -345,6 +455,12 @@ int ath10k_wow_init(struct ath10k *ar) > return -EINVAL; > > ar->wow.wowlan_support = ath10k_wowlan_support; > + > + if (ar->wmi.rx_decap_mode == ATH10K_HW_TXRX_NATIVE_WIFI) { > + ar->wow.wowlan_support.pattern_max_len -= WOW_MAX_REDUCE; > + ar->wow.wowlan_support.max_pkt_offset -= WOW_MAX_REDUCE; > + } > + > ar->wow.wowlan_support.n_patterns = ar->wow.max_num_patterns; > ar->hw->wiphy->wowlan = &ar->wow.wowlan_support; > > -- > 2.7.4 >
Hi, I will move the convert graph from comments to code. And new graph like this: /** + * Convert a 802.3 format to a 802.11 format. + * +------------+-----------+--------+----------------+ + * 802.3: |dest mac(6B)|src mac(6B)|type(2B)| body... | + * +------------+-----------+--------+----------------+ + * |__ |_______ |____________ |________ + * | | | | + * +--+------------+----+-----------+---------------+-----------+ + * 802.11: |4B|dest mac(6B)| 6B |src mac(6B)| 8B |type(2B)| body... | + * +--+------------+----+-----------+---------------+-----------+ + */ +static void ath10k_wow_convert_8023_to_80211 + (struct cfg80211_pkt_pattern *new, + const struct cfg80211_pkt_pattern *old) And the 444 bytes on stack will remain since the comments is: "we can go with this until somebody runs into a real problem" Thanks Gong Wen > -----Original Message----- > From: ath10k [mailto:ath10k-bounces@lists.infradead.org] On Behalf Of > Brian Norris > Sent: Thursday, April 12, 2018 7:13 AM > To: Wen Gong <wgong@codeaurora.org> > Cc: linux-wireless@vger.kernel.org; ath10k@lists.infradead.org > Subject: Re: [PATCH] ath10k: Convert wow pattern from 802.3 to 802.11 > > Hi, > > On Fri, Mar 30, 2018 at 11:18:19AM +0800, Wen Gong wrote: > > When trying to set wow wakeup patterns it fails with this command: > > > > iw phyxx wowlan enable patterns offset xx+ IP address xx.xx.xx.xx > > > > The reason is that the wow pattern from upper layer is in 802.3 format > > for this case, it need to convert it to 802.11 format. The input > > offset parameter is used for 802.3, but the actual offset firmware > > need depends on rx_decap_mode, so that it needs to be recalculated. > > Pattern of 802.3 packet is not same with 802.11 packet. If the > > rx_decap_mode is ATH10K_HW_TXRX_NATIVE_WIFI, then firmware will > > receive data packet with 802.11 format from hardware. > > > > Convert graph: > > ----------------------------------------------------------------------- > > 802.3 |dest mac(6B)|src mac(6B)|type(2B)| body... | > > |__ |_______ |_____________ |___________ > > | | | | > > 802.11 |4B|dest mac(6B)| 6B |src mac(6B)| 8B |type(2B)| body... | > > ---------------------------------------------------------------------- > > - > > It feels like this could go into the code comments? Or at least some short > version of it. (But hey, text is cheap, and who doesn't love ASCII > art?) > > > > > Tested with QCA6174 hw3.0 with firmware > > WLAN.RM.4.4.1-00099-QCARMSWPZ-1, but this will also affect QCA9377. > > This has always failed, so it's not a regression with new firmware > > releases. > > > > Signed-off-by: Wen Gong <wgong@codeaurora.org> > > --- > > drivers/net/wireless/ath/ath10k/wmi.h | 4 ++ > > drivers/net/wireless/ath/ath10k/wow.c | 128 > > ++++++++++++++++++++++++++++++++-- > > 2 files changed, 126 insertions(+), 6 deletions(-) > > > > diff --git a/drivers/net/wireless/ath/ath10k/wmi.h > > b/drivers/net/wireless/ath/ath10k/wmi.h > > index c7b30ed..389f9c7 100644 > > --- a/drivers/net/wireless/ath/ath10k/wmi.h > > +++ b/drivers/net/wireless/ath/ath10k/wmi.h > > @@ -6724,6 +6724,10 @@ struct wmi_wow_ev_arg { > > #define WOW_MIN_PATTERN_SIZE 1 > > #define WOW_MAX_PATTERN_SIZE 148 > > #define WOW_MAX_PKT_OFFSET 128 > > +#define WOW_HDR_LEN (sizeof(struct ieee80211_hdr_3addr) + \ > > + sizeof(struct rfc1042_hdr)) > > +#define WOW_MAX_REDUCE (WOW_HDR_LEN - sizeof(struct > ethhdr) - \ > > + offsetof(struct ieee80211_hdr_3addr, addr1)) > > > > enum wmi_tdls_state { > > WMI_TDLS_DISABLE, > > diff --git a/drivers/net/wireless/ath/ath10k/wow.c > > b/drivers/net/wireless/ath/ath10k/wow.c > > index c4cbccb..9b56a41 100644 > > --- a/drivers/net/wireless/ath/ath10k/wow.c > > +++ b/drivers/net/wireless/ath/ath10k/wow.c > > @@ -1,5 +1,6 @@ > > /* > > * Copyright (c) 2015-2017 Qualcomm Atheros, Inc. > > + * Copyright (c) 2018, The Linux Foundation. All rights reserved. > > * > > * Permission to use, copy, modify, and/or distribute this software for any > > * purpose with or without fee is hereby granted, provided that the > > above @@ -76,6 +77,98 @@ static int ath10k_wow_cleanup(struct ath10k > *ar) > > return 0; > > } > > > > +static void ath10k_wow_convert_8023_to_80211 > > + (struct cfg80211_pkt_pattern *new, > > + const struct cfg80211_pkt_pattern > *old) { > > + u8 hdr_8023_pattern[ETH_HLEN] = {}; > > + u8 hdr_8023_bit_mask[ETH_HLEN] = {}; > > + u8 hdr_80211_pattern[WOW_HDR_LEN] = {}; > > + u8 hdr_80211_bit_mask[WOW_HDR_LEN] = {}; > > + > > + int total_len = old->pkt_offset + old->pattern_len; > > + int hdr_80211_end_offset; > > + > > + struct ieee80211_hdr_3addr *new_hdr_pattern = > > + (struct ieee80211_hdr_3addr *)hdr_80211_pattern; > > + struct ieee80211_hdr_3addr *new_hdr_mask = > > + (struct ieee80211_hdr_3addr *)hdr_80211_bit_mask; > > + struct ethhdr *old_hdr_pattern = (struct ethhdr *)hdr_8023_pattern; > > + struct ethhdr *old_hdr_mask = (struct ethhdr *)hdr_8023_bit_mask; > > + int hdr_len = sizeof(*new_hdr_pattern); > > + > > + struct rfc1042_hdr *new_rfc_pattern = > > + (struct rfc1042_hdr *)(hdr_80211_pattern + hdr_len); > > + struct rfc1042_hdr *new_rfc_mask = > > + (struct rfc1042_hdr *)(hdr_80211_bit_mask + hdr_len); > > + int rfc_len = sizeof(*new_rfc_pattern); > > + > > + memcpy(hdr_8023_pattern + old->pkt_offset, > > + old->pattern, ETH_HLEN - old->pkt_offset); > > + memcpy(hdr_8023_bit_mask + old->pkt_offset, > > + old->mask, ETH_HLEN - old->pkt_offset); > > + > > + /* Copy destination address */ > > + memcpy(new_hdr_pattern->addr1, old_hdr_pattern->h_dest, > ETH_ALEN); > > + memcpy(new_hdr_mask->addr1, old_hdr_mask->h_dest, ETH_ALEN); > > + > > + /* Copy source address */ > > + memcpy(new_hdr_pattern->addr3, old_hdr_pattern->h_source, > ETH_ALEN); > > + memcpy(new_hdr_mask->addr3, old_hdr_mask->h_source, > ETH_ALEN); > > + > > + /* Copy logic link type */ > > + memcpy(&new_rfc_pattern->snap_type, > > + &old_hdr_pattern->h_proto, > > + sizeof(old_hdr_pattern->h_proto)); > > + memcpy(&new_rfc_mask->snap_type, > > + &old_hdr_mask->h_proto, > > + sizeof(old_hdr_mask->h_proto)); > > + > > + /* Caculate new pkt_offset */ > > + if (old->pkt_offset < ETH_ALEN) > > + new->pkt_offset = old->pkt_offset + > > + offsetof(struct ieee80211_hdr_3addr, addr1); > > + else if (old->pkt_offset < offsetof(struct ethhdr, h_proto)) > > + new->pkt_offset = old->pkt_offset + > > + offsetof(struct ieee80211_hdr_3addr, addr3) - > > + offsetof(struct ethhdr, h_source); > > + else > > + new->pkt_offset = old->pkt_offset + hdr_len + rfc_len - > ETH_HLEN; > > + > > + /* Caculate new hdr end offset */ > > + if (total_len > ETH_HLEN) > > + hdr_80211_end_offset = hdr_len + rfc_len; > > + else if (total_len > offsetof(struct ethhdr, h_proto)) > > + hdr_80211_end_offset = hdr_len + rfc_len + total_len - > ETH_HLEN; > > + else if (total_len > ETH_ALEN) > > + hdr_80211_end_offset = total_len - ETH_ALEN + > > + offsetof(struct ieee80211_hdr_3addr, addr3); > > + else > > + hdr_80211_end_offset = total_len + > > + offsetof(struct ieee80211_hdr_3addr, addr1); > > + > > + new->pattern_len = hdr_80211_end_offset - new->pkt_offset; > > + > > + memcpy((u8 *)new->pattern, > > + hdr_80211_pattern + new->pkt_offset, > > + new->pattern_len); > > + memcpy((u8 *)new->mask, > > + hdr_80211_bit_mask + new->pkt_offset, > > + new->pattern_len); > > + > > + if (total_len > ETH_HLEN) { > > + /* Copy frame body */ > > + memcpy((u8 *)new->pattern + new->pattern_len, > > + (void *)old->pattern + ETH_HLEN - old->pkt_offset, > > + total_len - ETH_HLEN); > > + memcpy((u8 *)new->mask + new->pattern_len, > > + (void *)old->mask + ETH_HLEN - old->pkt_offset, > > + total_len - ETH_HLEN); > > + > > + new->pattern_len += total_len - ETH_HLEN; > > + } > > +} > > + > > static int ath10k_vif_wow_set_wakeups(struct ath10k_vif *arvif, > > struct cfg80211_wowlan *wowlan) { @@ > -116,22 +209,39 @@ > > static int ath10k_vif_wow_set_wakeups(struct ath10k_vif *arvif, > > > > for (i = 0; i < wowlan->n_patterns; i++) { > > u8 bitmask[WOW_MAX_PATTERN_SIZE] = {}; > > + u8 ath_pattern[WOW_MAX_PATTERN_SIZE] = {}; > > + u8 ath_bitmask[WOW_MAX_PATTERN_SIZE] = {}; > > So now we've got 3 * 148 = 444 bytes on the stack just for this? Seems like it's > getting a little large for kernel code, but maybe not too bad. > I guess we can go with this until somebody runs into a real problem... > > Otherwise, seems to work for me: > > Tested-by: Brian Norris <briannorris@chromium.org> > Reviewed-by: Brian Norris <briannorris@chromium.org> > > > + struct cfg80211_pkt_pattern new_pattern = {}; > > + struct cfg80211_pkt_pattern old_pattern = patterns[i]; > > int j; > > - > > + new_pattern.pattern = ath_pattern; > > + new_pattern.mask = ath_bitmask; > > if (patterns[i].pattern_len > WOW_MAX_PATTERN_SIZE) > > continue; > > - > > /* convert bytemask to bitmask */ > > for (j = 0; j < patterns[i].pattern_len; j++) > > if (patterns[i].mask[j / 8] & BIT(j % 8)) > > bitmask[j] = 0xff; > > + old_pattern.mask = bitmask; > > + new_pattern = old_pattern; > > + > > + if (ar->wmi.rx_decap_mode == > ATH10K_HW_TXRX_NATIVE_WIFI) { > > + if (patterns[i].pkt_offset < ETH_HLEN) > > + > ath10k_wow_convert_8023_to_80211(&new_pattern, > > + > &old_pattern); > > + else > > + new_pattern.pkt_offset += WOW_HDR_LEN - > ETH_HLEN; > > + } > > + > > + if (WARN_ON(new_pattern.pattern_len > > WOW_MAX_PATTERN_SIZE)) > > + return -EINVAL; > > > > ret = ath10k_wmi_wow_add_pattern(ar, arvif->vdev_id, > > pattern_id, > > - patterns[i].pattern, > > - bitmask, > > - patterns[i].pattern_len, > > - patterns[i].pkt_offset); > > + new_pattern.pattern, > > + new_pattern.mask, > > + new_pattern.pattern_len, > > + new_pattern.pkt_offset); > > if (ret) { > > ath10k_warn(ar, "failed to add pattern %i to > vdev %i: %d\n", > > pattern_id, > > @@ -345,6 +455,12 @@ int ath10k_wow_init(struct ath10k *ar) > > return -EINVAL; > > > > ar->wow.wowlan_support = ath10k_wowlan_support; > > + > > + if (ar->wmi.rx_decap_mode == ATH10K_HW_TXRX_NATIVE_WIFI) { > > + ar->wow.wowlan_support.pattern_max_len -= > WOW_MAX_REDUCE; > > + ar->wow.wowlan_support.max_pkt_offset -= > WOW_MAX_REDUCE; > > + } > > + > > ar->wow.wowlan_support.n_patterns = ar- > >wow.max_num_patterns; > > ar->hw->wiphy->wowlan = &ar->wow.wowlan_support; > > > > -- > > 2.7.4 > > > > _______________________________________________ > ath10k mailing list > ath10k@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/ath10k
Hi, I will move the convert graph from comments to code and send Patch V2. And new graph like this: /** + * Convert a 802.3 format to a 802.11 format. + * +------------+-----------+--------+----------------+ + * 802.3: |dest mac(6B)|src mac(6B)|type(2B)| body... | + * +------------+-----------+--------+----------------+ + * |__ |_______ |____________ |________ + * | | | | + * +--+------------+----+-----------+---------------+-----------+ + * 802.11: |4B|dest mac(6B)| 6B |src mac(6B)| 8B |type(2B)| body... | + * +--+------------+----+-----------+---------------+-----------+ + */ +static void ath10k_wow_convert_8023_to_80211 + (struct cfg80211_pkt_pattern *new, + const struct cfg80211_pkt_pattern *old) And the 444 bytes on stack will remain since the comments is: "we can go with this until somebody runs into a real problem" On 2018-04-12 07:13, Brian Norris wrote: > Hi, > > On Fri, Mar 30, 2018 at 11:18:19AM +0800, Wen Gong wrote: >> When trying to set wow wakeup patterns it fails with this command: >> >> iw phyxx wowlan enable patterns offset xx+ IP address xx.xx.xx.xx >> >> The reason is that the wow pattern from upper layer is in 802.3 format >> for this case, it need to convert it to 802.11 format. The input >> offset parameter is used for 802.3, but the actual offset firmware >> need depends on rx_decap_mode, so that it needs to be recalculated. >> Pattern of 802.3 packet is not same with 802.11 packet. If the >> rx_decap_mode is ATH10K_HW_TXRX_NATIVE_WIFI, then firmware will >> receive data packet with 802.11 format from hardware. >> >> Convert graph: >> ----------------------------------------------------------------------- >> 802.3 |dest mac(6B)|src mac(6B)|type(2B)| body... | >> |__ |_______ |_____________ |___________ >> | | | | >> 802.11 |4B|dest mac(6B)| 6B |src mac(6B)| 8B |type(2B)| body... | >> ----------------------------------------------------------------------- > > It feels like this could go into the code comments? Or at least some > short version of it. (But hey, text is cheap, and who doesn't love > ASCII > art?) > >> >> Tested with QCA6174 hw3.0 with firmware >> WLAN.RM.4.4.1-00099-QCARMSWPZ-1, but this will also affect QCA9377. >> This has always failed, so it's not a regression with new firmware >> releases. >> >> Signed-off-by: Wen Gong <wgong@codeaurora.org> >> --- >> drivers/net/wireless/ath/ath10k/wmi.h | 4 ++ >> drivers/net/wireless/ath/ath10k/wow.c | 128 >> ++++++++++++++++++++++++++++++++-- >> 2 files changed, 126 insertions(+), 6 deletions(-) >> >> diff --git a/drivers/net/wireless/ath/ath10k/wmi.h >> b/drivers/net/wireless/ath/ath10k/wmi.h >> index c7b30ed..389f9c7 100644 >> --- a/drivers/net/wireless/ath/ath10k/wmi.h >> +++ b/drivers/net/wireless/ath/ath10k/wmi.h >> @@ -6724,6 +6724,10 @@ struct wmi_wow_ev_arg { >> #define WOW_MIN_PATTERN_SIZE 1 >> #define WOW_MAX_PATTERN_SIZE 148 >> #define WOW_MAX_PKT_OFFSET 128 >> +#define WOW_HDR_LEN (sizeof(struct ieee80211_hdr_3addr) + \ >> + sizeof(struct rfc1042_hdr)) >> +#define WOW_MAX_REDUCE (WOW_HDR_LEN - sizeof(struct ethhdr) - \ >> + offsetof(struct ieee80211_hdr_3addr, addr1)) >> >> enum wmi_tdls_state { >> WMI_TDLS_DISABLE, >> diff --git a/drivers/net/wireless/ath/ath10k/wow.c >> b/drivers/net/wireless/ath/ath10k/wow.c >> index c4cbccb..9b56a41 100644 >> --- a/drivers/net/wireless/ath/ath10k/wow.c >> +++ b/drivers/net/wireless/ath/ath10k/wow.c >> @@ -1,5 +1,6 @@ >> /* >> * Copyright (c) 2015-2017 Qualcomm Atheros, Inc. >> + * Copyright (c) 2018, The Linux Foundation. All rights reserved. >> * >> * Permission to use, copy, modify, and/or distribute this software >> for any >> * purpose with or without fee is hereby granted, provided that the >> above >> @@ -76,6 +77,98 @@ static int ath10k_wow_cleanup(struct ath10k *ar) >> return 0; >> } >> >> +static void ath10k_wow_convert_8023_to_80211 >> + (struct cfg80211_pkt_pattern *new, >> + const struct cfg80211_pkt_pattern *old) >> +{ >> + u8 hdr_8023_pattern[ETH_HLEN] = {}; >> + u8 hdr_8023_bit_mask[ETH_HLEN] = {}; >> + u8 hdr_80211_pattern[WOW_HDR_LEN] = {}; >> + u8 hdr_80211_bit_mask[WOW_HDR_LEN] = {}; >> + >> + int total_len = old->pkt_offset + old->pattern_len; >> + int hdr_80211_end_offset; >> + >> + struct ieee80211_hdr_3addr *new_hdr_pattern = >> + (struct ieee80211_hdr_3addr *)hdr_80211_pattern; >> + struct ieee80211_hdr_3addr *new_hdr_mask = >> + (struct ieee80211_hdr_3addr *)hdr_80211_bit_mask; >> + struct ethhdr *old_hdr_pattern = (struct ethhdr *)hdr_8023_pattern; >> + struct ethhdr *old_hdr_mask = (struct ethhdr *)hdr_8023_bit_mask; >> + int hdr_len = sizeof(*new_hdr_pattern); >> + >> + struct rfc1042_hdr *new_rfc_pattern = >> + (struct rfc1042_hdr *)(hdr_80211_pattern + hdr_len); >> + struct rfc1042_hdr *new_rfc_mask = >> + (struct rfc1042_hdr *)(hdr_80211_bit_mask + hdr_len); >> + int rfc_len = sizeof(*new_rfc_pattern); >> + >> + memcpy(hdr_8023_pattern + old->pkt_offset, >> + old->pattern, ETH_HLEN - old->pkt_offset); >> + memcpy(hdr_8023_bit_mask + old->pkt_offset, >> + old->mask, ETH_HLEN - old->pkt_offset); >> + >> + /* Copy destination address */ >> + memcpy(new_hdr_pattern->addr1, old_hdr_pattern->h_dest, ETH_ALEN); >> + memcpy(new_hdr_mask->addr1, old_hdr_mask->h_dest, ETH_ALEN); >> + >> + /* Copy source address */ >> + memcpy(new_hdr_pattern->addr3, old_hdr_pattern->h_source, ETH_ALEN); >> + memcpy(new_hdr_mask->addr3, old_hdr_mask->h_source, ETH_ALEN); >> + >> + /* Copy logic link type */ >> + memcpy(&new_rfc_pattern->snap_type, >> + &old_hdr_pattern->h_proto, >> + sizeof(old_hdr_pattern->h_proto)); >> + memcpy(&new_rfc_mask->snap_type, >> + &old_hdr_mask->h_proto, >> + sizeof(old_hdr_mask->h_proto)); >> + >> + /* Caculate new pkt_offset */ >> + if (old->pkt_offset < ETH_ALEN) >> + new->pkt_offset = old->pkt_offset + >> + offsetof(struct ieee80211_hdr_3addr, addr1); >> + else if (old->pkt_offset < offsetof(struct ethhdr, h_proto)) >> + new->pkt_offset = old->pkt_offset + >> + offsetof(struct ieee80211_hdr_3addr, addr3) - >> + offsetof(struct ethhdr, h_source); >> + else >> + new->pkt_offset = old->pkt_offset + hdr_len + rfc_len - ETH_HLEN; >> + >> + /* Caculate new hdr end offset */ >> + if (total_len > ETH_HLEN) >> + hdr_80211_end_offset = hdr_len + rfc_len; >> + else if (total_len > offsetof(struct ethhdr, h_proto)) >> + hdr_80211_end_offset = hdr_len + rfc_len + total_len - ETH_HLEN; >> + else if (total_len > ETH_ALEN) >> + hdr_80211_end_offset = total_len - ETH_ALEN + >> + offsetof(struct ieee80211_hdr_3addr, addr3); >> + else >> + hdr_80211_end_offset = total_len + >> + offsetof(struct ieee80211_hdr_3addr, addr1); >> + >> + new->pattern_len = hdr_80211_end_offset - new->pkt_offset; >> + >> + memcpy((u8 *)new->pattern, >> + hdr_80211_pattern + new->pkt_offset, >> + new->pattern_len); >> + memcpy((u8 *)new->mask, >> + hdr_80211_bit_mask + new->pkt_offset, >> + new->pattern_len); >> + >> + if (total_len > ETH_HLEN) { >> + /* Copy frame body */ >> + memcpy((u8 *)new->pattern + new->pattern_len, >> + (void *)old->pattern + ETH_HLEN - old->pkt_offset, >> + total_len - ETH_HLEN); >> + memcpy((u8 *)new->mask + new->pattern_len, >> + (void *)old->mask + ETH_HLEN - old->pkt_offset, >> + total_len - ETH_HLEN); >> + >> + new->pattern_len += total_len - ETH_HLEN; >> + } >> +} >> + >> static int ath10k_vif_wow_set_wakeups(struct ath10k_vif *arvif, >> struct cfg80211_wowlan *wowlan) >> { >> @@ -116,22 +209,39 @@ static int ath10k_vif_wow_set_wakeups(struct >> ath10k_vif *arvif, >> >> for (i = 0; i < wowlan->n_patterns; i++) { >> u8 bitmask[WOW_MAX_PATTERN_SIZE] = {}; >> + u8 ath_pattern[WOW_MAX_PATTERN_SIZE] = {}; >> + u8 ath_bitmask[WOW_MAX_PATTERN_SIZE] = {}; > > So now we've got 3 * 148 = 444 bytes on the stack just for this? Seems > like it's getting a little large for kernel code, but maybe not too > bad. > I guess we can go with this until somebody runs into a real problem... > > Otherwise, seems to work for me: > > Tested-by: Brian Norris <briannorris@chromium.org> > Reviewed-by: Brian Norris <briannorris@chromium.org> > >> + struct cfg80211_pkt_pattern new_pattern = {}; >> + struct cfg80211_pkt_pattern old_pattern = patterns[i]; >> int j; >> - >> + new_pattern.pattern = ath_pattern; >> + new_pattern.mask = ath_bitmask; >> if (patterns[i].pattern_len > WOW_MAX_PATTERN_SIZE) >> continue; >> - >> /* convert bytemask to bitmask */ >> for (j = 0; j < patterns[i].pattern_len; j++) >> if (patterns[i].mask[j / 8] & BIT(j % 8)) >> bitmask[j] = 0xff; >> + old_pattern.mask = bitmask; >> + new_pattern = old_pattern; >> + >> + if (ar->wmi.rx_decap_mode == ATH10K_HW_TXRX_NATIVE_WIFI) { >> + if (patterns[i].pkt_offset < ETH_HLEN) >> + ath10k_wow_convert_8023_to_80211(&new_pattern, >> + &old_pattern); >> + else >> + new_pattern.pkt_offset += WOW_HDR_LEN - ETH_HLEN; >> + } >> + >> + if (WARN_ON(new_pattern.pattern_len > WOW_MAX_PATTERN_SIZE)) >> + return -EINVAL; >> >> ret = ath10k_wmi_wow_add_pattern(ar, arvif->vdev_id, >> pattern_id, >> - patterns[i].pattern, >> - bitmask, >> - patterns[i].pattern_len, >> - patterns[i].pkt_offset); >> + new_pattern.pattern, >> + new_pattern.mask, >> + new_pattern.pattern_len, >> + new_pattern.pkt_offset); >> if (ret) { >> ath10k_warn(ar, "failed to add pattern %i to vdev %i: %d\n", >> pattern_id, >> @@ -345,6 +455,12 @@ int ath10k_wow_init(struct ath10k *ar) >> return -EINVAL; >> >> ar->wow.wowlan_support = ath10k_wowlan_support; >> + >> + if (ar->wmi.rx_decap_mode == ATH10K_HW_TXRX_NATIVE_WIFI) { >> + ar->wow.wowlan_support.pattern_max_len -= WOW_MAX_REDUCE; >> + ar->wow.wowlan_support.max_pkt_offset -= WOW_MAX_REDUCE; >> + } >> + >> ar->wow.wowlan_support.n_patterns = ar->wow.max_num_patterns; >> ar->hw->wiphy->wowlan = &ar->wow.wowlan_support; >> >> -- >> 2.7.4 >>
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index c7b30ed..389f9c7 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -6724,6 +6724,10 @@ struct wmi_wow_ev_arg { #define WOW_MIN_PATTERN_SIZE 1 #define WOW_MAX_PATTERN_SIZE 148 #define WOW_MAX_PKT_OFFSET 128 +#define WOW_HDR_LEN (sizeof(struct ieee80211_hdr_3addr) + \ + sizeof(struct rfc1042_hdr)) +#define WOW_MAX_REDUCE (WOW_HDR_LEN - sizeof(struct ethhdr) - \ + offsetof(struct ieee80211_hdr_3addr, addr1)) enum wmi_tdls_state { WMI_TDLS_DISABLE, diff --git a/drivers/net/wireless/ath/ath10k/wow.c b/drivers/net/wireless/ath/ath10k/wow.c index c4cbccb..9b56a41 100644 --- a/drivers/net/wireless/ath/ath10k/wow.c +++ b/drivers/net/wireless/ath/ath10k/wow.c @@ -1,5 +1,6 @@ /* * Copyright (c) 2015-2017 Qualcomm Atheros, Inc. + * Copyright (c) 2018, The Linux Foundation. All rights reserved. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -76,6 +77,98 @@ static int ath10k_wow_cleanup(struct ath10k *ar) return 0; } +static void ath10k_wow_convert_8023_to_80211 + (struct cfg80211_pkt_pattern *new, + const struct cfg80211_pkt_pattern *old) +{ + u8 hdr_8023_pattern[ETH_HLEN] = {}; + u8 hdr_8023_bit_mask[ETH_HLEN] = {}; + u8 hdr_80211_pattern[WOW_HDR_LEN] = {}; + u8 hdr_80211_bit_mask[WOW_HDR_LEN] = {}; + + int total_len = old->pkt_offset + old->pattern_len; + int hdr_80211_end_offset; + + struct ieee80211_hdr_3addr *new_hdr_pattern = + (struct ieee80211_hdr_3addr *)hdr_80211_pattern; + struct ieee80211_hdr_3addr *new_hdr_mask = + (struct ieee80211_hdr_3addr *)hdr_80211_bit_mask; + struct ethhdr *old_hdr_pattern = (struct ethhdr *)hdr_8023_pattern; + struct ethhdr *old_hdr_mask = (struct ethhdr *)hdr_8023_bit_mask; + int hdr_len = sizeof(*new_hdr_pattern); + + struct rfc1042_hdr *new_rfc_pattern = + (struct rfc1042_hdr *)(hdr_80211_pattern + hdr_len); + struct rfc1042_hdr *new_rfc_mask = + (struct rfc1042_hdr *)(hdr_80211_bit_mask + hdr_len); + int rfc_len = sizeof(*new_rfc_pattern); + + memcpy(hdr_8023_pattern + old->pkt_offset, + old->pattern, ETH_HLEN - old->pkt_offset); + memcpy(hdr_8023_bit_mask + old->pkt_offset, + old->mask, ETH_HLEN - old->pkt_offset); + + /* Copy destination address */ + memcpy(new_hdr_pattern->addr1, old_hdr_pattern->h_dest, ETH_ALEN); + memcpy(new_hdr_mask->addr1, old_hdr_mask->h_dest, ETH_ALEN); + + /* Copy source address */ + memcpy(new_hdr_pattern->addr3, old_hdr_pattern->h_source, ETH_ALEN); + memcpy(new_hdr_mask->addr3, old_hdr_mask->h_source, ETH_ALEN); + + /* Copy logic link type */ + memcpy(&new_rfc_pattern->snap_type, + &old_hdr_pattern->h_proto, + sizeof(old_hdr_pattern->h_proto)); + memcpy(&new_rfc_mask->snap_type, + &old_hdr_mask->h_proto, + sizeof(old_hdr_mask->h_proto)); + + /* Caculate new pkt_offset */ + if (old->pkt_offset < ETH_ALEN) + new->pkt_offset = old->pkt_offset + + offsetof(struct ieee80211_hdr_3addr, addr1); + else if (old->pkt_offset < offsetof(struct ethhdr, h_proto)) + new->pkt_offset = old->pkt_offset + + offsetof(struct ieee80211_hdr_3addr, addr3) - + offsetof(struct ethhdr, h_source); + else + new->pkt_offset = old->pkt_offset + hdr_len + rfc_len - ETH_HLEN; + + /* Caculate new hdr end offset */ + if (total_len > ETH_HLEN) + hdr_80211_end_offset = hdr_len + rfc_len; + else if (total_len > offsetof(struct ethhdr, h_proto)) + hdr_80211_end_offset = hdr_len + rfc_len + total_len - ETH_HLEN; + else if (total_len > ETH_ALEN) + hdr_80211_end_offset = total_len - ETH_ALEN + + offsetof(struct ieee80211_hdr_3addr, addr3); + else + hdr_80211_end_offset = total_len + + offsetof(struct ieee80211_hdr_3addr, addr1); + + new->pattern_len = hdr_80211_end_offset - new->pkt_offset; + + memcpy((u8 *)new->pattern, + hdr_80211_pattern + new->pkt_offset, + new->pattern_len); + memcpy((u8 *)new->mask, + hdr_80211_bit_mask + new->pkt_offset, + new->pattern_len); + + if (total_len > ETH_HLEN) { + /* Copy frame body */ + memcpy((u8 *)new->pattern + new->pattern_len, + (void *)old->pattern + ETH_HLEN - old->pkt_offset, + total_len - ETH_HLEN); + memcpy((u8 *)new->mask + new->pattern_len, + (void *)old->mask + ETH_HLEN - old->pkt_offset, + total_len - ETH_HLEN); + + new->pattern_len += total_len - ETH_HLEN; + } +} + static int ath10k_vif_wow_set_wakeups(struct ath10k_vif *arvif, struct cfg80211_wowlan *wowlan) { @@ -116,22 +209,39 @@ static int ath10k_vif_wow_set_wakeups(struct ath10k_vif *arvif, for (i = 0; i < wowlan->n_patterns; i++) { u8 bitmask[WOW_MAX_PATTERN_SIZE] = {}; + u8 ath_pattern[WOW_MAX_PATTERN_SIZE] = {}; + u8 ath_bitmask[WOW_MAX_PATTERN_SIZE] = {}; + struct cfg80211_pkt_pattern new_pattern = {}; + struct cfg80211_pkt_pattern old_pattern = patterns[i]; int j; - + new_pattern.pattern = ath_pattern; + new_pattern.mask = ath_bitmask; if (patterns[i].pattern_len > WOW_MAX_PATTERN_SIZE) continue; - /* convert bytemask to bitmask */ for (j = 0; j < patterns[i].pattern_len; j++) if (patterns[i].mask[j / 8] & BIT(j % 8)) bitmask[j] = 0xff; + old_pattern.mask = bitmask; + new_pattern = old_pattern; + + if (ar->wmi.rx_decap_mode == ATH10K_HW_TXRX_NATIVE_WIFI) { + if (patterns[i].pkt_offset < ETH_HLEN) + ath10k_wow_convert_8023_to_80211(&new_pattern, + &old_pattern); + else + new_pattern.pkt_offset += WOW_HDR_LEN - ETH_HLEN; + } + + if (WARN_ON(new_pattern.pattern_len > WOW_MAX_PATTERN_SIZE)) + return -EINVAL; ret = ath10k_wmi_wow_add_pattern(ar, arvif->vdev_id, pattern_id, - patterns[i].pattern, - bitmask, - patterns[i].pattern_len, - patterns[i].pkt_offset); + new_pattern.pattern, + new_pattern.mask, + new_pattern.pattern_len, + new_pattern.pkt_offset); if (ret) { ath10k_warn(ar, "failed to add pattern %i to vdev %i: %d\n", pattern_id, @@ -345,6 +455,12 @@ int ath10k_wow_init(struct ath10k *ar) return -EINVAL; ar->wow.wowlan_support = ath10k_wowlan_support; + + if (ar->wmi.rx_decap_mode == ATH10K_HW_TXRX_NATIVE_WIFI) { + ar->wow.wowlan_support.pattern_max_len -= WOW_MAX_REDUCE; + ar->wow.wowlan_support.max_pkt_offset -= WOW_MAX_REDUCE; + } + ar->wow.wowlan_support.n_patterns = ar->wow.max_num_patterns; ar->hw->wiphy->wowlan = &ar->wow.wowlan_support;
When trying to set wow wakeup patterns it fails with this command: iw phyxx wowlan enable patterns offset xx+ IP address xx.xx.xx.xx The reason is that the wow pattern from upper layer is in 802.3 format for this case, it need to convert it to 802.11 format. The input offset parameter is used for 802.3, but the actual offset firmware need depends on rx_decap_mode, so that it needs to be recalculated. Pattern of 802.3 packet is not same with 802.11 packet. If the rx_decap_mode is ATH10K_HW_TXRX_NATIVE_WIFI, then firmware will receive data packet with 802.11 format from hardware. Convert graph: ----------------------------------------------------------------------- 802.3 |dest mac(6B)|src mac(6B)|type(2B)| body... | |__ |_______ |_____________ |___________ | | | | 802.11 |4B|dest mac(6B)| 6B |src mac(6B)| 8B |type(2B)| body... | ----------------------------------------------------------------------- Tested with QCA6174 hw3.0 with firmware WLAN.RM.4.4.1-00099-QCARMSWPZ-1, but this will also affect QCA9377. This has always failed, so it's not a regression with new firmware releases. Signed-off-by: Wen Gong <wgong@codeaurora.org> --- drivers/net/wireless/ath/ath10k/wmi.h | 4 ++ drivers/net/wireless/ath/ath10k/wow.c | 128 ++++++++++++++++++++++++++++++++-- 2 files changed, 126 insertions(+), 6 deletions(-)