diff mbox series

[PATCHv2,5/9] nl80211: Add netlink attribute to configure TID specific tx rate

Message ID 1550813554-11581-6-git-send-email-tamizhr@codeaurora.org (mailing list archive)
State New, archived
Headers show
Series cfg80211/mac80211: Add support for TID specific configuration | expand

Commit Message

Tamizh chelvam Feb. 22, 2019, 5:32 a.m. UTC
Introduce NL80211_ATTR_TID_CONFIG_TX_RATES in nl80211_attr_tid_config
to accept data TID specific TX bitrate configuration
through NL80211_CMD_SET_TID_CONFIG command. TID for which the
this configuration is to be applied is passed in
NL80211_ATTR_TID_CONFIG_TID attribute. TX bitrate mask values passed
in NL80211_ATTR_TX_RATES attribute and NL80211_ATTR_TID_CONFIG_TX_RATES
attribute will have types of the TX rate should be applied.
When the user-space wants this configuration peer specific
rather than being applied for all the connected stations,
MAC address of the peer can be passed in NL80211_ATTR_MAC attribute.
NL80211_ATTR_TX_RATES attribute can hold single value at a time, so the
TX bitrate configuration can be set one TID at a time.

Driver supporting this feature should advertise
NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK and supporting per-STA data TID
TX bitrate configuration should advertise
NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK.

Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
---
 include/net/cfg80211.h       |  5 +++++
 include/uapi/linux/nl80211.h | 38 ++++++++++++++++++++++++++++++++++++++
 net/wireless/nl80211.c       | 41 +++++++++++++++++++++++++++++++++++++++--
 3 files changed, 82 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index cf4a3f0..713de1e 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -514,6 +514,7 @@  enum ieee80211_tid_conf_mask {
 	IEEE80211_TID_CONF_RETRY	= BIT(1),
 	IEEE80211_TID_CONF_AMPDU	= BIT(2),
 	IEEE80211_TID_CONF_RTSCTS	= BIT(3),
+	IEEE80211_TID_CONF_TX_BITRATE	= BIT(4),
 };
 
 /**
@@ -526,6 +527,8 @@  enum ieee80211_tid_conf_mask {
  * @retry_short: retry count value
  * @ampdu: Enable/Disable aggregation
  * @rtscts: Enable/Disable RTS/CTS
+ * @txrate_type: TX bitrate mask type
+ * @mask: bitrate to be applied for the TID
  */
 struct ieee80211_tid_cfg {
 	u8 tid;
@@ -535,6 +538,8 @@  struct ieee80211_tid_cfg {
 	int retry_short;
 	u8 ampdu;
 	u8 rtscts;
+	enum nl80211_tx_rate_setting txrate_type;
+	struct cfg80211_bitrate_mask *mask;
 };
 
 /**
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 996b4d4..9a6f63e 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -4557,6 +4557,18 @@  enum nl80211_tx_power_setting {
 	NL80211_TX_POWER_FIXED,
 };
 
+/**
+ * enum nl80211_tx_rate_setting - TX rate configuration type
+ * @NL80211_TX_RATE_AUTOMATIC: automatically determine TX rate
+ * @NL80211_TX_RATE_LIMITED: limit the TX rate by the TX rate parameter
+ * @NL80211_TX_RATE_FIXED: fix TX rate to the TX rate parameter
+ */
+enum nl80211_tx_rate_setting {
+	NL80211_TX_RATE_AUTOMATIC,
+	NL80211_TX_RATE_LIMITED,
+	NL80211_TX_RATE_FIXED,
+};
+
 enum nl80211_tid_config {
 	NL80211_TID_CONFIG_DEFAULT,
 	NL80211_TID_CONFIG_ENABLE,
@@ -4645,6 +4657,25 @@  enum nl80211_tid_config {
  *	NL80211_EXT_FEATURE_PER_TID_RTSCTS_CTRL and supporting per station
  *	RTS_CTS configuration should advertise
  *	NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL.
+ * @NL80211_ATTR_TID_CONFIG_TX_RATES: Data frame TX rate mask should be applied
+ *	with the parameters passed through %NL80211_ATTR_TX_RATES. This
+ *	configuration is per TID, TID is specified with
+ *	%NL80211_ATTR_TID_CONFIG_TID.
+ *	If the peer MAC address is passed in %NL80211_ATTR_MAC, then this
+ *	configuration is applied to the data frame for the tid to that connected
+ *	station. This attribute will be useful to notfiy the driver that what
+ *	type of txrate should be applied(%enum enum nl80211_tx_rate_setting)
+ *	for the connected station (%NL80211_ATTR_MAC),
+ *	Station specific retry configuration is valid only for STA's
+ *	current connection. i.e. the configuration will be reset to default when
+ *	the station connects back after disconnection/roaming.
+ *	when user-space does not include %NL80211_ATTR_MAC, this configuration
+ *	should be treated as per-netdev configuration. This configuration will
+ *	be cleared when the interface goes down and on the disconnection from a
+ *	BSS. Driver supporting this feature should advertise
+ *	NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK and supporting per station
+ *	TX bitrate configuration should advertise
+ *	NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK.
  */
 enum nl80211_attr_tid_config {
 	__NL80211_ATTR_TID_INVALID,
@@ -4655,6 +4686,7 @@  enum nl80211_attr_tid_config {
 	NL80211_ATTR_TID_CONFIG_RETRY_LONG,
 	NL80211_ATTR_TID_CONFIG_AMPDU_CTRL,
 	NL80211_ATTR_TID_CONFIG_RTSCTS_CTRL,
+	NL80211_ATTR_TID_CONFIG_TX_RATES,
 
 	/* keep last */
 	__NL80211_ATTR_TID_CONFIG_AFTER_LAST,
@@ -5477,6 +5509,10 @@  enum nl80211_feature_flags {
  *	RTS_CTS control(enable/disable).
  * @NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL: Driver supports STA specific
  *	RTS_CTS control(enable/disable).
+ * @NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK: Driver supports TID specific
+ *	TX bitrate configuration.
+ * @NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK: Driver supports STA specific
+ *	TX bitrate configuration.
  *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -5527,6 +5563,8 @@  enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL,
 	NL80211_EXT_FEATURE_PER_TID_RTSCTS_CTRL,
 	NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL,
+	NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK,
+	NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index cd1e1e8..25ed505 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -292,6 +292,8 @@  static int validate_ie_attr(const struct nlattr *attr,
 			NLA_POLICY_MAX(NLA_U8, NL80211_TID_CONFIG_DISABLE),
 	[NL80211_ATTR_TID_CONFIG_RTSCTS_CTRL] =
 			NLA_POLICY_MAX(NLA_U8, NL80211_TID_CONFIG_DISABLE),
+	[NL80211_ATTR_TID_CONFIG_TX_RATES] =
+			NLA_POLICY_MAX(NLA_U8, NL80211_TX_RATE_FIXED),
 };
 
 const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
@@ -13260,8 +13262,10 @@  static int nl80211_get_ftm_responder_stats(struct sk_buff *skb,
 static int parse_tid_conf(struct cfg80211_registered_device *rdev,
 			  struct nlattr *attrs[],
 			  struct ieee80211_tid_cfg *tid_conf,
-			  const u8 *peer)
+			  struct genl_info *info, const u8 *peer)
 {
+	int ret;
+
 	tid_conf->tid = nla_get_u8(attrs[NL80211_ATTR_TID_CONFIG_TID]);
 	if (attrs[NL80211_ATTR_TID_CONFIG_NOACK]) {
 		if (!wiphy_ext_feature_isset(&rdev->wiphy,
@@ -13336,6 +13340,39 @@  static int parse_tid_conf(struct cfg80211_registered_device *rdev,
 			nla_get_u8(attrs[NL80211_ATTR_TID_CONFIG_RTSCTS_CTRL]);
 	}
 
+	if (attrs[NL80211_ATTR_TID_CONFIG_TX_RATES]) {
+		int idx;
+
+		if (!wiphy_ext_feature_isset(&rdev->wiphy,
+				NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK))
+			return -EOPNOTSUPP;
+
+		if (peer &&
+		    !wiphy_ext_feature_isset(&rdev->wiphy,
+				NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK))
+			return -EOPNOTSUPP;
+
+		idx = NL80211_ATTR_TID_CONFIG_TX_RATES;
+		tid_conf->txrate_type = nla_get_u8(attrs[idx]);
+
+		tid_conf->tid_conf_mask |= IEEE80211_TID_CONF_TX_BITRATE;
+		if (tid_conf->txrate_type != NL80211_TX_RATE_AUTOMATIC) {
+			tid_conf->mask =
+				kzalloc(sizeof(struct cfg80211_bitrate_mask),
+					GFP_KERNEL);
+			if (!tid_conf->mask)
+				return -ENOMEM;
+			ret = nl80211_parse_tx_bitrate_mask(info,
+							    tid_conf->mask);
+			if (ret) {
+				kfree(tid_conf->mask);
+				return ret;
+			}
+		} else {
+			tid_conf->mask = NULL;
+		}
+	}
+
 	return 0;
 }
 
@@ -13387,7 +13424,7 @@  static int nl80211_set_tid_config(struct sk_buff *skb,
 			return -EINVAL;
 
 		ret = parse_tid_conf(rdev, attrs, &tid_conf->tid_conf[conf_idx],
-				     tid_conf->peer);
+				     info, tid_conf->peer);
 		if (ret)
 			goto bad_tid_conf;