| Message ID | 1554870654-4236-1-git-send-email-wgong@codeaurora.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ath10k: change swap mail box config for UTF mode of SDIO | expand |
Wen Gong <wgong@codeaurora.org> wrote: > For SDIO chip, it does not have HTT connect step in boot phase of UTF > mode, so it does not need the swap configuration for UTF mode, otherwise > it will trigger UTF load fail. For normal mode, it is swap between HTT > and WMI, for UTF mode, it does not have HTT, so it can not swap between > HTT and WMI. > > Disable swap mail box for UTF mode will let UTF mode load success. > > Tested with QCA6174 SDIO with firmware > WLAN.RMH.4.4.1-00007-QCARMSWP-1. > > Signed-off-by: Wen Gong <wgong@codeaurora.org> > Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Patch applied to ath-next branch of ath.git, thanks. 8cdee1affe90 ath10k: change swap mail box config for UTF mode of SDIO
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 835b8de..79a238c 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -629,7 +629,7 @@ static void ath10k_send_suspend_complete(struct ath10k *ar) complete(&ar->target_suspend); } -static void ath10k_init_sdio(struct ath10k *ar) +static void ath10k_init_sdio(struct ath10k *ar, enum ath10k_firmware_mode mode) { u32 param = 0; @@ -646,7 +646,12 @@ static void ath10k_init_sdio(struct ath10k *ar) * not big enough for mac80211 / native wifi frames. disable it */ param &= ~HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE; - param |= HI_ACS_FLAGS_SDIO_SWAP_MAILBOX_SET; + + if (mode == ATH10K_FIRMWARE_MODE_UTF) + param &= ~HI_ACS_FLAGS_SDIO_SWAP_MAILBOX_SET; + else + param |= HI_ACS_FLAGS_SDIO_SWAP_MAILBOX_SET; + ath10k_bmi_write32(ar, hi_acs_flags, param); /* Explicitly set fwlog prints to zero as target may turn it on @@ -2501,7 +2506,7 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode, goto err; if (ar->hif.bus == ATH10K_BUS_SDIO) - ath10k_init_sdio(ar); + ath10k_init_sdio(ar, mode); } ar->htc.htc_ops.target_send_suspend_complete = diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c index fae56c6..bfb125b 100644 --- a/drivers/net/wireless/ath/ath10k/sdio.c +++ b/drivers/net/wireless/ath/ath10k/sdio.c @@ -1637,7 +1637,12 @@ static int ath10k_sdio_hif_swap_mailbox(struct ath10k *ar) ath10k_dbg(ar, ATH10K_DBG_SDIO, "sdio mailbox swap service enabled\n"); ar_sdio->swap_mbox = true; + } else { + ath10k_dbg(ar, ATH10K_DBG_SDIO, + "sdio mailbox swap service disabled\n"); + ar_sdio->swap_mbox = false; } + return 0; }
For SDIO chip, it does not have HTT connect step in boot phase of UTF mode, so it does not need the swap configuration for UTF mode, otherwise it will trigger UTF load fail. For normal mode, it is swap between HTT and WMI, for UTF mode, it does not have HTT, so it can not swap between HTT and WMI. Disable swap mail box for UTF mode will let UTF mode load success. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00007-QCARMSWP-1. Signed-off-by: Wen Gong <wgong@codeaurora.org> --- drivers/net/wireless/ath/ath10k/core.c | 11 ++++++++--- drivers/net/wireless/ath/ath10k/sdio.c | 5 +++++ 2 files changed, 13 insertions(+), 3 deletions(-)