diff mbox

[2/2] ath10k: remove 10.1 firmware support

Message ID 20160603153328.11947-2-rmanohar@qti.qualcomm.com (mailing list archive)
State Rejected
Delegated to: Kalle Valo
Headers show

Commit Message

Rajkumar Manoharan June 3, 2016, 3:33 p.m. UTC
Earlier qca9888 device was brought up using 10.1 firmware and then
later all firmware fixes and new features are migrated to 10.2/10.2.x
firmware branch. As all of 10.1 funtionalities are supported in 10.2
based firmware, removing 10.1 firmware support for qca9888 device.

Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.c     |   4 +-
 drivers/net/wireless/ath/ath10k/mac.c      |   4 +-
 drivers/net/wireless/ath/ath10k/testmode.c |   2 +-
 drivers/net/wireless/ath/ath10k/wmi.c      | 543 +----------------------------
 drivers/net/wireless/ath/ath10k/wmi.h      | 246 -------------
 5 files changed, 8 insertions(+), 791 deletions(-)

Comments

Ben Greear June 3, 2016, 3:48 p.m. UTC | #1
On 06/03/2016 08:33 AM, Rajkumar Manoharan wrote:
> Earlier qca9888 device was brought up using 10.1 firmware and then
> later all firmware fixes and new features are migrated to 10.2/10.2.x
> firmware branch. As all of 10.1 funtionalities are supported in 10.2
> based firmware, removing 10.1 firmware support for qca9888 device.

Oh please do not do this.  My 10.1 firmware works very nicely,
and out-performs 10.2 in my testing.  Lots of people use my firmware
when they need IBSS support or other features not found in
official firmware, so it is not just me that will have
problems if you remove this support.

Thanks,
Ben
Rajkumar Manoharan June 3, 2016, 3:55 p.m. UTC | #2
On 2016-06-03 21:18, Ben Greear wrote:
> On 06/03/2016 08:33 AM, Rajkumar Manoharan wrote:
>> Earlier qca9888 device was brought up using 10.1 firmware and then
>> later all firmware fixes and new features are migrated to 10.2/10.2.x
>> firmware branch. As all of 10.1 funtionalities are supported in 10.2
>> based firmware, removing 10.1 firmware support for qca9888 device.
> 
> Oh please do not do this.  My 10.1 firmware works very nicely,
> and out-performs 10.2 in my testing.  Lots of people use my firmware
> when they need IBSS support or other features not found in
> official firmware, so it is not just me that will have
> problems if you remove this support.
> 
Aah.. I thought CT firmware is 10.2 based. Since most of firmware bug 
fixes and enhancements are integrated into 10.2 based firmware, we 
thought of get rid of 10.1 firmware to reduce code size. Moreover 
existing 10.1 official firmware has known issues. Is it possible to 
upgrade CT firmware to 10.2 WMI/HTT interfaces?

-Rajkumar
Ben Greear June 3, 2016, 4:07 p.m. UTC | #3
On 06/03/2016 08:55 AM, Rajkumar Manoharan wrote:
> On 2016-06-03 21:18, Ben Greear wrote:
>> On 06/03/2016 08:33 AM, Rajkumar Manoharan wrote:
>>> Earlier qca9888 device was brought up using 10.1 firmware and then
>>> later all firmware fixes and new features are migrated to 10.2/10.2.x
>>> firmware branch. As all of 10.1 funtionalities are supported in 10.2
>>> based firmware, removing 10.1 firmware support for qca9888 device.
>>
>> Oh please do not do this.  My 10.1 firmware works very nicely,
>> and out-performs 10.2 in my testing.  Lots of people use my firmware
>> when they need IBSS support or other features not found in
>> official firmware, so it is not just me that will have
>> problems if you remove this support.
>>
> Aah.. I thought CT firmware is 10.2 based. Since most of firmware bug fixes and enhancements are integrated into 10.2 based firmware, we thought of get rid of
> 10.1 firmware to reduce code size. Moreover existing 10.1 official firmware has known issues. Is it possible to upgrade CT firmware to 10.2 WMI/HTT interfaces?

I have a 10.2 firmware too, but it is less stable, performs worse,
uses more RAM on the NIC (so I can do fewer virtual stations),
and I am not sure I can squeeze enough RAM out of it to port some
of the more interesting rate-ctrl fixes from 10.1 to 10.2.
I have recently started backporting a lot of 10.2.4 changes
into 10.1, which will aid any users on pre 4.0 kernels since they cannot
run 10.2.4 firmware w/out backporting.

I might could make my 10.1 work with a 10.2 driver API, but it would take quite a bit of
effort, way more than what removing 10.1 from the driver saves in my opinion.
The driver already separates firmware specific logic pretty well, so I don't think
it should be a huge maintenance effort to keep 10.1 support in the driver.

Maybe you could delete the 10.2 (not 10.2.4) firmware support and gain some space that way?  I
doubt anyone is using that productively....

Thanks,
Ben
Kalle Valo June 3, 2016, 4:09 p.m. UTC | #4
Rajkumar Manoharan <rmanohar@codeaurora.org> writes:

> On 2016-06-03 21:18, Ben Greear wrote:
>> On 06/03/2016 08:33 AM, Rajkumar Manoharan wrote:
>>> Earlier qca9888 device was brought up using 10.1 firmware and then
>>> later all firmware fixes and new features are migrated to 10.2/10.2.x
>>> firmware branch. As all of 10.1 funtionalities are supported in 10.2
>>> based firmware, removing 10.1 firmware support for qca9888 device.
>>
>> Oh please do not do this.  My 10.1 firmware works very nicely,
>> and out-performs 10.2 in my testing.  Lots of people use my firmware
>> when they need IBSS support or other features not found in
>> official firmware, so it is not just me that will have
>> problems if you remove this support.
>>
> Aah.. I thought CT firmware is 10.2 based. Since most of firmware bug
> fixes and enhancements are integrated into 10.2 based firmware, we
> thought of get rid of 10.1 firmware to reduce code size. Moreover
> existing 10.1 official firmware has known issues.

Yeah, we really want to reduce the amount firmware branches to support
in ath10k.

> Is it possible to upgrade CT firmware to 10.2 WMI/HTT interfaces?

That's a good idea. That shouldn't be too hard, right? I don't think HTT needs
any changes, but for WMI few commands and ids need to be changed.
Ben Greear June 3, 2016, 4:20 p.m. UTC | #5
On 06/03/2016 09:09 AM, Valo, Kalle wrote:
> Rajkumar Manoharan <rmanohar@codeaurora.org> writes:
>
>> On 2016-06-03 21:18, Ben Greear wrote:
>>> On 06/03/2016 08:33 AM, Rajkumar Manoharan wrote:
>>>> Earlier qca9888 device was brought up using 10.1 firmware and then
>>>> later all firmware fixes and new features are migrated to 10.2/10.2.x
>>>> firmware branch. As all of 10.1 funtionalities are supported in 10.2
>>>> based firmware, removing 10.1 firmware support for qca9888 device.
>>>
>>> Oh please do not do this.  My 10.1 firmware works very nicely,
>>> and out-performs 10.2 in my testing.  Lots of people use my firmware
>>> when they need IBSS support or other features not found in
>>> official firmware, so it is not just me that will have
>>> problems if you remove this support.
>>>
>> Aah.. I thought CT firmware is 10.2 based. Since most of firmware bug
>> fixes and enhancements are integrated into 10.2 based firmware, we
>> thought of get rid of 10.1 firmware to reduce code size. Moreover
>> existing 10.1 official firmware has known issues.
>
> Yeah, we really want to reduce the amount firmware branches to support
> in ath10k.
>
>> Is it possible to upgrade CT firmware to 10.2 WMI/HTT interfaces?
>
> That's a good idea. That shouldn't be too hard, right? I don't think HTT needs
> any changes, but for WMI few commands and ids need to be changed.

I was thinking the 10.2 mgt-over-htt API would be trouble-some to make work on
10.1 firmware.  I have my own way to do mgt-over-htt in 10.1, but API
is different and I would need a small driver patch upstream
to make that work.  I'm not sure what other changes would be needed, but
if it is just conditionally compiling some WMI defines, that should be
doable.

Thanks,
Ben
Rajkumar Manoharan June 3, 2016, 4:28 p.m. UTC | #6
On 2016-06-03 21:37, Ben Greear wrote:
> On 06/03/2016 08:55 AM, Rajkumar Manoharan wrote:
>> On 2016-06-03 21:18, Ben Greear wrote:
>>> On 06/03/2016 08:33 AM, Rajkumar Manoharan wrote:
>>>> Earlier qca9888 device was brought up using 10.1 firmware and then
>>>> later all firmware fixes and new features are migrated to 
>>>> 10.2/10.2.x
>>>> firmware branch. As all of 10.1 funtionalities are supported in 10.2
>>>> based firmware, removing 10.1 firmware support for qca9888 device.
>>> 
>>> Oh please do not do this.  My 10.1 firmware works very nicely,
>>> and out-performs 10.2 in my testing.  Lots of people use my firmware
>>> when they need IBSS support or other features not found in
>>> official firmware, so it is not just me that will have
>>> problems if you remove this support.
>>> 
>> Aah.. I thought CT firmware is 10.2 based. Since most of firmware bug 
>> fixes and enhancements are integrated into 10.2 based firmware, we 
>> thought of get rid of
>> 10.1 firmware to reduce code size. Moreover existing 10.1 official 
>> firmware has known issues. Is it possible to upgrade CT firmware to 
>> 10.2 WMI/HTT interfaces?
> 
> I have a 10.2 firmware too, but it is less stable, performs worse,
> uses more RAM on the NIC (so I can do fewer virtual stations),
> and I am not sure I can squeeze enough RAM out of it to port some
> of the more interesting rate-ctrl fixes from 10.1 to 10.2.
> I have recently started backporting a lot of 10.2.4 changes
> into 10.1, which will aid any users on pre 4.0 kernels since they 
> cannot
> run 10.2.4 firmware w/out backporting.
> 
> I might could make my 10.1 work with a 10.2 driver API, but it would
> take quite a bit of
> effort, way more than what removing 10.1 from the driver saves in my 
> opinion.
> The driver already separates firmware specific logic pretty well, so I
> don't think
> it should be a huge maintenance effort to keep 10.1 support in the 
> driver.
> 
> Maybe you could delete the 10.2 (not 10.2.4) firmware support and gain
> some space that way?  I
> doubt anyone is using that productively....
> 
Nope. There are customers who are still using 10.2.2 firmware. My kind 
advice is that please try to optimize latest firmware. 10.2 is nothing 
but based on 10.1 trunk so there wont be much interface difference... 
Will drop this series as of now...

Kalle,

Please drop this series.. Sorry for the noise.

-Rajkumar
Kalle Valo June 3, 2016, 4:33 p.m. UTC | #7
Ben Greear <greearb@candelatech.com> writes:

>>> Is it possible to upgrade CT firmware to 10.2 WMI/HTT interfaces?
>>
>> That's a good idea. That shouldn't be too hard, right? I don't think HTT needs
>> any changes, but for WMI few commands and ids need to be changed.
>
> I was thinking the 10.2 mgt-over-htt API would be trouble-some to make work on
> 10.1 firmware.

Yeah, that would be harder. But I don't see Rajkumar removing support
for that (yet) or am I missing something?
Ben Greear June 3, 2016, 4:36 p.m. UTC | #8
On 06/03/2016 09:28 AM, Rajkumar Manoharan wrote:
> On 2016-06-03 21:37, Ben Greear wrote:
>> On 06/03/2016 08:55 AM, Rajkumar Manoharan wrote:
>>> On 2016-06-03 21:18, Ben Greear wrote:
>>>> On 06/03/2016 08:33 AM, Rajkumar Manoharan wrote:
>>>>> Earlier qca9888 device was brought up using 10.1 firmware and then
>>>>> later all firmware fixes and new features are migrated to 10.2/10.2.x
>>>>> firmware branch. As all of 10.1 funtionalities are supported in 10.2
>>>>> based firmware, removing 10.1 firmware support for qca9888 device.
>>>>
>>>> Oh please do not do this.  My 10.1 firmware works very nicely,
>>>> and out-performs 10.2 in my testing.  Lots of people use my firmware
>>>> when they need IBSS support or other features not found in
>>>> official firmware, so it is not just me that will have
>>>> problems if you remove this support.
>>>>
>>> Aah.. I thought CT firmware is 10.2 based. Since most of firmware bug fixes and enhancements are integrated into 10.2 based firmware, we thought of get rid of
>>> 10.1 firmware to reduce code size. Moreover existing 10.1 official firmware has known issues. Is it possible to upgrade CT firmware to 10.2 WMI/HTT interfaces?
>>
>> I have a 10.2 firmware too, but it is less stable, performs worse,
>> uses more RAM on the NIC (so I can do fewer virtual stations),
>> and I am not sure I can squeeze enough RAM out of it to port some
>> of the more interesting rate-ctrl fixes from 10.1 to 10.2.
>> I have recently started backporting a lot of 10.2.4 changes
>> into 10.1, which will aid any users on pre 4.0 kernels since they cannot
>> run 10.2.4 firmware w/out backporting.
>>
>> I might could make my 10.1 work with a 10.2 driver API, but it would
>> take quite a bit of
>> effort, way more than what removing 10.1 from the driver saves in my opinion.
>> The driver already separates firmware specific logic pretty well, so I
>> don't think
>> it should be a huge maintenance effort to keep 10.1 support in the driver.
>>
>> Maybe you could delete the 10.2 (not 10.2.4) firmware support and gain
>> some space that way?  I
>> doubt anyone is using that productively....
>>
> Nope. There are customers who are still using 10.2.2 firmware. My kind advice is that please try to optimize latest firmware. 10.2 is nothing but based on 10.1
> trunk so there wont be much interface difference... Will drop this series as of now...

10.2 has a significant re-work of the rate-ctrl.  I think that is the main difference
that I see.

Maybe I can just copy the 10.1 rate-ctrl over 10.2 and get back the memory and performance
that I need.  But, I have a bunch of other stuff to do first.

Thanks,
Ben
Ben Greear June 3, 2016, 4:46 p.m. UTC | #9
On 06/03/2016 09:33 AM, Valo, Kalle wrote:
> Ben Greear <greearb@candelatech.com> writes:
>
>>>> Is it possible to upgrade CT firmware to 10.2 WMI/HTT interfaces?
>>>
>>> That's a good idea. That shouldn't be too hard, right? I don't think HTT needs
>>> any changes, but for WMI few commands and ids need to be changed.
>>
>> I was thinking the 10.2 mgt-over-htt API would be trouble-some to make work on
>> 10.1 firmware.
>
> Yeah, that would be harder. But I don't see Rajkumar removing support
> for that (yet) or am I missing something?

What I mean is that to just make my 10.1 firmware act like 10.2 would require
my 10.1 to suddenly support 10.2's mgt-over-htt.  I think that will be difficult,
and there is plenty of risk that some subtle WMI change would cause hard-to-detect
bugs.

I have done an initial port of my 10.1 changes to 10.2, it is just that the
result is poor, and so I quit messing with 10.2 and re-focussed on 10.1
for the time being.

Another way to help with this problem in general is to quit adding so many
new firmware API.  It is a lot easier to make a new firmware backwards compat
than it is to make an old firmware forwards compat.  When you are designing your
WMI changes in new firmware, do it with care, and then you can reuse the vast bulk
of your driver.  I managed to add quite a few new features to my 10.1 in this
manner, and the driver patches (mostly keyed off of feature flags) are not that
invasive.

Thanks,
Ben
diff mbox

Patch

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index cedf127df168..156e1b8a2470 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -1546,7 +1546,6 @@  static int ath10k_core_init_firmware_features(struct ath10k *ar)
 			WMI_STAT_PEER;
 		ar->max_spatial_stream = WMI_MAX_SPATIAL_STREAM;
 		break;
-	case ATH10K_FW_WMI_OP_VERSION_10_1:
 	case ATH10K_FW_WMI_OP_VERSION_10_2:
 	case ATH10K_FW_WMI_OP_VERSION_10_2_4:
 		if (ath10k_peer_stats_enabled(ar)) {
@@ -1588,6 +1587,7 @@  static int ath10k_core_init_firmware_features(struct ath10k *ar)
 		else
 			ar->htt.max_num_pending_tx = TARGET_10_4_NUM_MSDU_DESC;
 		break;
+	case ATH10K_FW_WMI_OP_VERSION_10_1:
 	case ATH10K_FW_WMI_OP_VERSION_UNSET:
 	case ATH10K_FW_WMI_OP_VERSION_MAX:
 		WARN_ON(1);
@@ -1602,7 +1602,6 @@  static int ath10k_core_init_firmware_features(struct ath10k *ar)
 		case ATH10K_FW_WMI_OP_VERSION_MAIN:
 			fw_file->htt_op_version = ATH10K_FW_HTT_OP_VERSION_MAIN;
 			break;
-		case ATH10K_FW_WMI_OP_VERSION_10_1:
 		case ATH10K_FW_WMI_OP_VERSION_10_2:
 		case ATH10K_FW_WMI_OP_VERSION_10_2_4:
 			fw_file->htt_op_version = ATH10K_FW_HTT_OP_VERSION_10_1;
@@ -1610,6 +1609,7 @@  static int ath10k_core_init_firmware_features(struct ath10k *ar)
 		case ATH10K_FW_WMI_OP_VERSION_TLV:
 			fw_file->htt_op_version = ATH10K_FW_HTT_OP_VERSION_TLV;
 			break;
+		case ATH10K_FW_WMI_OP_VERSION_10_1:
 		case ATH10K_FW_WMI_OP_VERSION_10_4:
 		case ATH10K_FW_WMI_OP_VERSION_UNSET:
 		case ATH10K_FW_WMI_OP_VERSION_MAX:
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 84a3e4902720..23109d1431a2 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -5284,7 +5284,7 @@  static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 		if (info->assoc) {
 			/* Workaround: Make sure monitor vdev is not running
 			 * when associating to prevent some firmware revisions
-			 * (e.g. 10.1 and 10.2) from crashing.
+			 * (e.g. 10.2) from crashing.
 			 */
 			if (ar->monitor_started)
 				ath10k_monitor_stop(ar);
@@ -7852,7 +7852,6 @@  int ath10k_mac_register(struct ath10k *ar)
 		}
 		ar->hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC);
 		break;
-	case ATH10K_FW_WMI_OP_VERSION_10_1:
 	case ATH10K_FW_WMI_OP_VERSION_10_2:
 	case ATH10K_FW_WMI_OP_VERSION_10_2_4:
 		ar->hw->wiphy->iface_combinations = ath10k_10x_if_comb;
@@ -7864,6 +7863,7 @@  int ath10k_mac_register(struct ath10k *ar)
 		ar->hw->wiphy->n_iface_combinations =
 			ARRAY_SIZE(ath10k_10_4_if_comb);
 		break;
+	case ATH10K_FW_WMI_OP_VERSION_10_1:
 	case ATH10K_FW_WMI_OP_VERSION_UNSET:
 	case ATH10K_FW_WMI_OP_VERSION_MAX:
 		WARN_ON(1);
diff --git a/drivers/net/wireless/ath/ath10k/testmode.c b/drivers/net/wireless/ath/ath10k/testmode.c
index 120f4234d3b0..8b8fcfc1705d 100644
--- a/drivers/net/wireless/ath/ath10k/testmode.c
+++ b/drivers/net/wireless/ath/ath10k/testmode.c
@@ -162,7 +162,7 @@  static int ath10k_tm_fetch_utf_firmware_api_1(struct ath10k *ar,
 	 * correct WMI interface.
 	 */
 
-	fw_file->wmi_op_version = ATH10K_FW_WMI_OP_VERSION_10_1;
+	fw_file->wmi_op_version = ATH10K_FW_WMI_OP_VERSION_10_2;
 	fw_file->htt_op_version = ATH10K_FW_HTT_OP_VERSION_10_1;
 	fw_file->firmware_data = fw_file->firmware->data;
 	fw_file->firmware_len = fw_file->firmware->size;
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index b7fb0d76c433..70be2d40870d 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -193,172 +193,6 @@  static struct wmi_cmd_map wmi_cmd_map = {
 	.pdev_bss_chan_info_request_cmdid = WMI_CMD_UNSUPPORTED,
 };
 
-/* 10.X WMI cmd track */
-static struct wmi_cmd_map wmi_10x_cmd_map = {
-	.init_cmdid = WMI_10X_INIT_CMDID,
-	.start_scan_cmdid = WMI_10X_START_SCAN_CMDID,
-	.stop_scan_cmdid = WMI_10X_STOP_SCAN_CMDID,
-	.scan_chan_list_cmdid = WMI_10X_SCAN_CHAN_LIST_CMDID,
-	.scan_sch_prio_tbl_cmdid = WMI_CMD_UNSUPPORTED,
-	.pdev_set_regdomain_cmdid = WMI_10X_PDEV_SET_REGDOMAIN_CMDID,
-	.pdev_set_channel_cmdid = WMI_10X_PDEV_SET_CHANNEL_CMDID,
-	.pdev_set_param_cmdid = WMI_10X_PDEV_SET_PARAM_CMDID,
-	.pdev_pktlog_enable_cmdid = WMI_10X_PDEV_PKTLOG_ENABLE_CMDID,
-	.pdev_pktlog_disable_cmdid = WMI_10X_PDEV_PKTLOG_DISABLE_CMDID,
-	.pdev_set_wmm_params_cmdid = WMI_10X_PDEV_SET_WMM_PARAMS_CMDID,
-	.pdev_set_ht_cap_ie_cmdid = WMI_10X_PDEV_SET_HT_CAP_IE_CMDID,
-	.pdev_set_vht_cap_ie_cmdid = WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID,
-	.pdev_set_dscp_tid_map_cmdid = WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID,
-	.pdev_set_quiet_mode_cmdid = WMI_10X_PDEV_SET_QUIET_MODE_CMDID,
-	.pdev_green_ap_ps_enable_cmdid = WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID,
-	.pdev_get_tpc_config_cmdid = WMI_10X_PDEV_GET_TPC_CONFIG_CMDID,
-	.pdev_set_base_macaddr_cmdid = WMI_10X_PDEV_SET_BASE_MACADDR_CMDID,
-	.vdev_create_cmdid = WMI_10X_VDEV_CREATE_CMDID,
-	.vdev_delete_cmdid = WMI_10X_VDEV_DELETE_CMDID,
-	.vdev_start_request_cmdid = WMI_10X_VDEV_START_REQUEST_CMDID,
-	.vdev_restart_request_cmdid = WMI_10X_VDEV_RESTART_REQUEST_CMDID,
-	.vdev_up_cmdid = WMI_10X_VDEV_UP_CMDID,
-	.vdev_stop_cmdid = WMI_10X_VDEV_STOP_CMDID,
-	.vdev_down_cmdid = WMI_10X_VDEV_DOWN_CMDID,
-	.vdev_set_param_cmdid = WMI_10X_VDEV_SET_PARAM_CMDID,
-	.vdev_install_key_cmdid = WMI_10X_VDEV_INSTALL_KEY_CMDID,
-	.peer_create_cmdid = WMI_10X_PEER_CREATE_CMDID,
-	.peer_delete_cmdid = WMI_10X_PEER_DELETE_CMDID,
-	.peer_flush_tids_cmdid = WMI_10X_PEER_FLUSH_TIDS_CMDID,
-	.peer_set_param_cmdid = WMI_10X_PEER_SET_PARAM_CMDID,
-	.peer_assoc_cmdid = WMI_10X_PEER_ASSOC_CMDID,
-	.peer_add_wds_entry_cmdid = WMI_10X_PEER_ADD_WDS_ENTRY_CMDID,
-	.peer_remove_wds_entry_cmdid = WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID,
-	.peer_mcast_group_cmdid = WMI_10X_PEER_MCAST_GROUP_CMDID,
-	.bcn_tx_cmdid = WMI_10X_BCN_TX_CMDID,
-	.pdev_send_bcn_cmdid = WMI_10X_PDEV_SEND_BCN_CMDID,
-	.bcn_tmpl_cmdid = WMI_CMD_UNSUPPORTED,
-	.bcn_filter_rx_cmdid = WMI_10X_BCN_FILTER_RX_CMDID,
-	.prb_req_filter_rx_cmdid = WMI_10X_PRB_REQ_FILTER_RX_CMDID,
-	.mgmt_tx_cmdid = WMI_10X_MGMT_TX_CMDID,
-	.prb_tmpl_cmdid = WMI_CMD_UNSUPPORTED,
-	.addba_clear_resp_cmdid = WMI_10X_ADDBA_CLEAR_RESP_CMDID,
-	.addba_send_cmdid = WMI_10X_ADDBA_SEND_CMDID,
-	.addba_status_cmdid = WMI_10X_ADDBA_STATUS_CMDID,
-	.delba_send_cmdid = WMI_10X_DELBA_SEND_CMDID,
-	.addba_set_resp_cmdid = WMI_10X_ADDBA_SET_RESP_CMDID,
-	.send_singleamsdu_cmdid = WMI_10X_SEND_SINGLEAMSDU_CMDID,
-	.sta_powersave_mode_cmdid = WMI_10X_STA_POWERSAVE_MODE_CMDID,
-	.sta_powersave_param_cmdid = WMI_10X_STA_POWERSAVE_PARAM_CMDID,
-	.sta_mimo_ps_mode_cmdid = WMI_10X_STA_MIMO_PS_MODE_CMDID,
-	.pdev_dfs_enable_cmdid = WMI_10X_PDEV_DFS_ENABLE_CMDID,
-	.pdev_dfs_disable_cmdid = WMI_10X_PDEV_DFS_DISABLE_CMDID,
-	.roam_scan_mode = WMI_10X_ROAM_SCAN_MODE,
-	.roam_scan_rssi_threshold = WMI_10X_ROAM_SCAN_RSSI_THRESHOLD,
-	.roam_scan_period = WMI_10X_ROAM_SCAN_PERIOD,
-	.roam_scan_rssi_change_threshold =
-				WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
-	.roam_ap_profile = WMI_10X_ROAM_AP_PROFILE,
-	.ofl_scan_add_ap_profile = WMI_10X_OFL_SCAN_ADD_AP_PROFILE,
-	.ofl_scan_remove_ap_profile = WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE,
-	.ofl_scan_period = WMI_10X_OFL_SCAN_PERIOD,
-	.p2p_dev_set_device_info = WMI_10X_P2P_DEV_SET_DEVICE_INFO,
-	.p2p_dev_set_discoverability = WMI_10X_P2P_DEV_SET_DISCOVERABILITY,
-	.p2p_go_set_beacon_ie = WMI_10X_P2P_GO_SET_BEACON_IE,
-	.p2p_go_set_probe_resp_ie = WMI_10X_P2P_GO_SET_PROBE_RESP_IE,
-	.p2p_set_vendor_ie_data_cmdid = WMI_CMD_UNSUPPORTED,
-	.ap_ps_peer_param_cmdid = WMI_10X_AP_PS_PEER_PARAM_CMDID,
-	.ap_ps_peer_uapsd_coex_cmdid = WMI_CMD_UNSUPPORTED,
-	.peer_rate_retry_sched_cmdid = WMI_10X_PEER_RATE_RETRY_SCHED_CMDID,
-	.wlan_profile_trigger_cmdid = WMI_10X_WLAN_PROFILE_TRIGGER_CMDID,
-	.wlan_profile_set_hist_intvl_cmdid =
-				WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
-	.wlan_profile_get_profile_data_cmdid =
-				WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
-	.wlan_profile_enable_profile_id_cmdid =
-				WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
-	.wlan_profile_list_profile_id_cmdid =
-				WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
-	.pdev_suspend_cmdid = WMI_10X_PDEV_SUSPEND_CMDID,
-	.pdev_resume_cmdid = WMI_10X_PDEV_RESUME_CMDID,
-	.add_bcn_filter_cmdid = WMI_10X_ADD_BCN_FILTER_CMDID,
-	.rmv_bcn_filter_cmdid = WMI_10X_RMV_BCN_FILTER_CMDID,
-	.wow_add_wake_pattern_cmdid = WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID,
-	.wow_del_wake_pattern_cmdid = WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID,
-	.wow_enable_disable_wake_event_cmdid =
-				WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
-	.wow_enable_cmdid = WMI_10X_WOW_ENABLE_CMDID,
-	.wow_hostwakeup_from_sleep_cmdid =
-				WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
-	.rtt_measreq_cmdid = WMI_10X_RTT_MEASREQ_CMDID,
-	.rtt_tsf_cmdid = WMI_10X_RTT_TSF_CMDID,
-	.vdev_spectral_scan_configure_cmdid =
-				WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
-	.vdev_spectral_scan_enable_cmdid =
-				WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
-	.request_stats_cmdid = WMI_10X_REQUEST_STATS_CMDID,
-	.set_arp_ns_offload_cmdid = WMI_CMD_UNSUPPORTED,
-	.network_list_offload_config_cmdid = WMI_CMD_UNSUPPORTED,
-	.gtk_offload_cmdid = WMI_CMD_UNSUPPORTED,
-	.csa_offload_enable_cmdid = WMI_CMD_UNSUPPORTED,
-	.csa_offload_chanswitch_cmdid = WMI_CMD_UNSUPPORTED,
-	.chatter_set_mode_cmdid = WMI_CMD_UNSUPPORTED,
-	.peer_tid_addba_cmdid = WMI_CMD_UNSUPPORTED,
-	.peer_tid_delba_cmdid = WMI_CMD_UNSUPPORTED,
-	.sta_dtim_ps_method_cmdid = WMI_CMD_UNSUPPORTED,
-	.sta_uapsd_auto_trig_cmdid = WMI_CMD_UNSUPPORTED,
-	.sta_keepalive_cmd = WMI_CMD_UNSUPPORTED,
-	.echo_cmdid = WMI_10X_ECHO_CMDID,
-	.pdev_utf_cmdid = WMI_10X_PDEV_UTF_CMDID,
-	.dbglog_cfg_cmdid = WMI_10X_DBGLOG_CFG_CMDID,
-	.pdev_qvit_cmdid = WMI_10X_PDEV_QVIT_CMDID,
-	.pdev_ftm_intg_cmdid = WMI_CMD_UNSUPPORTED,
-	.vdev_set_keepalive_cmdid = WMI_CMD_UNSUPPORTED,
-	.vdev_get_keepalive_cmdid = WMI_CMD_UNSUPPORTED,
-	.force_fw_hang_cmdid = WMI_CMD_UNSUPPORTED,
-	.gpio_config_cmdid = WMI_10X_GPIO_CONFIG_CMDID,
-	.gpio_output_cmdid = WMI_10X_GPIO_OUTPUT_CMDID,
-	.pdev_get_temperature_cmdid = WMI_CMD_UNSUPPORTED,
-	.pdev_enable_adaptive_cca_cmdid = WMI_CMD_UNSUPPORTED,
-	.scan_update_request_cmdid = WMI_CMD_UNSUPPORTED,
-	.vdev_standby_response_cmdid = WMI_CMD_UNSUPPORTED,
-	.vdev_resume_response_cmdid = WMI_CMD_UNSUPPORTED,
-	.wlan_peer_caching_add_peer_cmdid = WMI_CMD_UNSUPPORTED,
-	.wlan_peer_caching_evict_peer_cmdid = WMI_CMD_UNSUPPORTED,
-	.wlan_peer_caching_restore_peer_cmdid = WMI_CMD_UNSUPPORTED,
-	.wlan_peer_caching_print_all_peers_info_cmdid = WMI_CMD_UNSUPPORTED,
-	.peer_update_wds_entry_cmdid = WMI_CMD_UNSUPPORTED,
-	.peer_add_proxy_sta_entry_cmdid = WMI_CMD_UNSUPPORTED,
-	.rtt_keepalive_cmdid = WMI_CMD_UNSUPPORTED,
-	.oem_req_cmdid = WMI_CMD_UNSUPPORTED,
-	.nan_cmdid = WMI_CMD_UNSUPPORTED,
-	.vdev_ratemask_cmdid = WMI_CMD_UNSUPPORTED,
-	.qboost_cfg_cmdid = WMI_CMD_UNSUPPORTED,
-	.pdev_smart_ant_enable_cmdid = WMI_CMD_UNSUPPORTED,
-	.pdev_smart_ant_set_rx_antenna_cmdid = WMI_CMD_UNSUPPORTED,
-	.peer_smart_ant_set_tx_antenna_cmdid = WMI_CMD_UNSUPPORTED,
-	.peer_smart_ant_set_train_info_cmdid = WMI_CMD_UNSUPPORTED,
-	.peer_smart_ant_set_node_config_ops_cmdid = WMI_CMD_UNSUPPORTED,
-	.pdev_set_antenna_switch_table_cmdid = WMI_CMD_UNSUPPORTED,
-	.pdev_set_ctl_table_cmdid = WMI_CMD_UNSUPPORTED,
-	.pdev_set_mimogain_table_cmdid = WMI_CMD_UNSUPPORTED,
-	.pdev_ratepwr_table_cmdid = WMI_CMD_UNSUPPORTED,
-	.pdev_ratepwr_chainmsk_table_cmdid = WMI_CMD_UNSUPPORTED,
-	.pdev_fips_cmdid = WMI_CMD_UNSUPPORTED,
-	.tt_set_conf_cmdid = WMI_CMD_UNSUPPORTED,
-	.fwtest_cmdid = WMI_CMD_UNSUPPORTED,
-	.vdev_atf_request_cmdid = WMI_CMD_UNSUPPORTED,
-	.peer_atf_request_cmdid = WMI_CMD_UNSUPPORTED,
-	.pdev_get_ani_cck_config_cmdid = WMI_CMD_UNSUPPORTED,
-	.pdev_get_ani_ofdm_config_cmdid = WMI_CMD_UNSUPPORTED,
-	.pdev_reserve_ast_entry_cmdid = WMI_CMD_UNSUPPORTED,
-	.pdev_get_nfcal_power_cmdid = WMI_CMD_UNSUPPORTED,
-	.pdev_get_tpc_cmdid = WMI_CMD_UNSUPPORTED,
-	.pdev_get_ast_info_cmdid = WMI_CMD_UNSUPPORTED,
-	.vdev_set_dscp_tid_map_cmdid = WMI_CMD_UNSUPPORTED,
-	.pdev_get_info_cmdid = WMI_CMD_UNSUPPORTED,
-	.vdev_get_info_cmdid = WMI_CMD_UNSUPPORTED,
-	.vdev_filter_neighbor_rx_packets_cmdid = WMI_CMD_UNSUPPORTED,
-	.mu_cal_start_cmdid = WMI_CMD_UNSUPPORTED,
-	.set_cca_params_cmdid = WMI_CMD_UNSUPPORTED,
-	.pdev_bss_chan_info_request_cmdid = WMI_CMD_UNSUPPORTED,
-};
-
 /* 10.2.4 WMI cmd track */
 static struct wmi_cmd_map wmi_10_2_4_cmd_map = {
 	.init_cmdid = WMI_10_2_INIT_CMDID,
@@ -1575,23 +1409,6 @@  static const struct wmi_peer_flags_map wmi_peer_flags_map = {
 	.pmf = WMI_PEER_PMF,
 };
 
-static const struct wmi_peer_flags_map wmi_10x_peer_flags_map = {
-	.auth = WMI_10X_PEER_AUTH,
-	.qos = WMI_10X_PEER_QOS,
-	.need_ptk_4_way = WMI_10X_PEER_NEED_PTK_4_WAY,
-	.need_gtk_2_way = WMI_10X_PEER_NEED_GTK_2_WAY,
-	.apsd = WMI_10X_PEER_APSD,
-	.ht = WMI_10X_PEER_HT,
-	.bw40 = WMI_10X_PEER_40MHZ,
-	.stbc = WMI_10X_PEER_STBC,
-	.ldbc = WMI_10X_PEER_LDPC,
-	.dyn_mimops = WMI_10X_PEER_DYN_MIMOPS,
-	.static_mimops = WMI_10X_PEER_STATIC_MIMOPS,
-	.spatial_mux = WMI_10X_PEER_SPATIAL_MUX,
-	.vht = WMI_10X_PEER_VHT,
-	.bw80 = WMI_10X_PEER_80MHZ,
-};
-
 static const struct wmi_peer_flags_map wmi_10_2_peer_flags_map = {
 	.auth = WMI_10_2_PEER_AUTH,
 	.qos = WMI_10_2_PEER_QOS,
@@ -2689,65 +2506,6 @@  static int ath10k_wmi_main_op_pull_fw_stats(struct ath10k *ar,
 	return 0;
 }
 
-static int ath10k_wmi_10x_op_pull_fw_stats(struct ath10k *ar,
-					   struct sk_buff *skb,
-					   struct ath10k_fw_stats *stats)
-{
-	const struct wmi_stats_event *ev = (void *)skb->data;
-	u32 num_pdev_stats, num_vdev_stats, num_peer_stats;
-	int i;
-
-	if (!skb_pull(skb, sizeof(*ev)))
-		return -EPROTO;
-
-	num_pdev_stats = __le32_to_cpu(ev->num_pdev_stats);
-	num_vdev_stats = __le32_to_cpu(ev->num_vdev_stats);
-	num_peer_stats = __le32_to_cpu(ev->num_peer_stats);
-
-	for (i = 0; i < num_pdev_stats; i++) {
-		const struct wmi_10x_pdev_stats *src;
-		struct ath10k_fw_stats_pdev *dst;
-
-		src = (void *)skb->data;
-		if (!skb_pull(skb, sizeof(*src)))
-			return -EPROTO;
-
-		dst = kzalloc(sizeof(*dst), GFP_ATOMIC);
-		if (!dst)
-			continue;
-
-		ath10k_wmi_pull_pdev_stats_base(&src->base, dst);
-		ath10k_wmi_pull_pdev_stats_tx(&src->tx, dst);
-		ath10k_wmi_pull_pdev_stats_rx(&src->rx, dst);
-		ath10k_wmi_pull_pdev_stats_extra(&src->extra, dst);
-
-		list_add_tail(&dst->list, &stats->pdevs);
-	}
-
-	/* fw doesn't implement vdev stats */
-
-	for (i = 0; i < num_peer_stats; i++) {
-		const struct wmi_10x_peer_stats *src;
-		struct ath10k_fw_stats_peer *dst;
-
-		src = (void *)skb->data;
-		if (!skb_pull(skb, sizeof(*src)))
-			return -EPROTO;
-
-		dst = kzalloc(sizeof(*dst), GFP_ATOMIC);
-		if (!dst)
-			continue;
-
-		ath10k_wmi_pull_peer_stats(&src->old, dst);
-
-		dst->peer_rx_rate = __le32_to_cpu(src->peer_rx_rate);
-
-		list_add_tail(&dst->list, &stats->peers);
-	}
-
-	return 0;
-}
-
 static int ath10k_wmi_10_2_op_pull_fw_stats(struct ath10k *ar,
 					    struct sk_buff *skb,
 					    struct ath10k_fw_stats *stats)
@@ -4967,130 +4725,6 @@  out:
 	dev_kfree_skb(skb);
 }
 
-static void ath10k_wmi_10_1_op_rx(struct ath10k *ar, struct sk_buff *skb)
-{
-	struct wmi_cmd_hdr *cmd_hdr;
-	enum wmi_10x_event_id id;
-	bool consumed;
-
-	cmd_hdr = (struct wmi_cmd_hdr *)skb->data;
-	id = MS(__le32_to_cpu(cmd_hdr->cmd_id), WMI_CMD_HDR_CMD_ID);
-
-	if (skb_pull(skb, sizeof(struct wmi_cmd_hdr)) == NULL)
-		goto out;
-
-	trace_ath10k_wmi_event(ar, id, skb->data, skb->len);
-
-	consumed = ath10k_tm_event_wmi(ar, id, skb);
-
-	/* Ready event must be handled normally also in UTF mode so that we
-	 * know the UTF firmware has booted, others we are just bypass WMI
-	 * events to testmode.
-	 */
-	if (consumed && id != WMI_10X_READY_EVENTID) {
-		ath10k_dbg(ar, ATH10K_DBG_WMI,
-			   "wmi testmode consumed 0x%x\n", id);
-		goto out;
-	}
-
-	switch (id) {
-	case WMI_10X_MGMT_RX_EVENTID:
-		ath10k_wmi_event_mgmt_rx(ar, skb);
-		/* mgmt_rx() owns the skb now! */
-		return;
-	case WMI_10X_SCAN_EVENTID:
-		ath10k_wmi_event_scan(ar, skb);
-		break;
-	case WMI_10X_CHAN_INFO_EVENTID:
-		ath10k_wmi_event_chan_info(ar, skb);
-		break;
-	case WMI_10X_ECHO_EVENTID:
-		ath10k_wmi_event_echo(ar, skb);
-		break;
-	case WMI_10X_DEBUG_MESG_EVENTID:
-		ath10k_wmi_event_debug_mesg(ar, skb);
-		break;
-	case WMI_10X_UPDATE_STATS_EVENTID:
-		ath10k_wmi_event_update_stats(ar, skb);
-		break;
-	case WMI_10X_VDEV_START_RESP_EVENTID:
-		ath10k_wmi_event_vdev_start_resp(ar, skb);
-		break;
-	case WMI_10X_VDEV_STOPPED_EVENTID:
-		ath10k_wmi_event_vdev_stopped(ar, skb);
-		break;
-	case WMI_10X_PEER_STA_KICKOUT_EVENTID:
-		ath10k_wmi_event_peer_sta_kickout(ar, skb);
-		break;
-	case WMI_10X_HOST_SWBA_EVENTID:
-		ath10k_wmi_event_host_swba(ar, skb);
-		break;
-	case WMI_10X_TBTTOFFSET_UPDATE_EVENTID:
-		ath10k_wmi_event_tbttoffset_update(ar, skb);
-		break;
-	case WMI_10X_PHYERR_EVENTID:
-		ath10k_wmi_event_phyerr(ar, skb);
-		break;
-	case WMI_10X_ROAM_EVENTID:
-		ath10k_wmi_event_roam(ar, skb);
-		break;
-	case WMI_10X_PROFILE_MATCH:
-		ath10k_wmi_event_profile_match(ar, skb);
-		break;
-	case WMI_10X_DEBUG_PRINT_EVENTID:
-		ath10k_wmi_event_debug_print(ar, skb);
-		break;
-	case WMI_10X_PDEV_QVIT_EVENTID:
-		ath10k_wmi_event_pdev_qvit(ar, skb);
-		break;
-	case WMI_10X_WLAN_PROFILE_DATA_EVENTID:
-		ath10k_wmi_event_wlan_profile_data(ar, skb);
-		break;
-	case WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID:
-		ath10k_wmi_event_rtt_measurement_report(ar, skb);
-		break;
-	case WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID:
-		ath10k_wmi_event_tsf_measurement_report(ar, skb);
-		break;
-	case WMI_10X_RTT_ERROR_REPORT_EVENTID:
-		ath10k_wmi_event_rtt_error_report(ar, skb);
-		break;
-	case WMI_10X_WOW_WAKEUP_HOST_EVENTID:
-		ath10k_wmi_event_wow_wakeup_host(ar, skb);
-		break;
-	case WMI_10X_DCS_INTERFERENCE_EVENTID:
-		ath10k_wmi_event_dcs_interference(ar, skb);
-		break;
-	case WMI_10X_PDEV_TPC_CONFIG_EVENTID:
-		ath10k_wmi_event_pdev_tpc_config(ar, skb);
-		break;
-	case WMI_10X_INST_RSSI_STATS_EVENTID:
-		ath10k_wmi_event_inst_rssi_stats(ar, skb);
-		break;
-	case WMI_10X_VDEV_STANDBY_REQ_EVENTID:
-		ath10k_wmi_event_vdev_standby_req(ar, skb);
-		break;
-	case WMI_10X_VDEV_RESUME_REQ_EVENTID:
-		ath10k_wmi_event_vdev_resume_req(ar, skb);
-		break;
-	case WMI_10X_SERVICE_READY_EVENTID:
-		ath10k_wmi_event_service_ready(ar, skb);
-		return;
-	case WMI_10X_READY_EVENTID:
-		ath10k_wmi_event_ready(ar, skb);
-		break;
-	case WMI_10X_PDEV_UTF_EVENTID:
-		/* ignore utf events */
-		break;
-	default:
-		ath10k_warn(ar, "Unknown eventid: %d\n", id);
-		break;
-	}
-
-out:
-	dev_kfree_skb(skb);
-}
-
 static void ath10k_wmi_10_2_op_rx(struct ath10k *ar, struct sk_buff *skb)
 {
 	struct wmi_cmd_hdr *cmd_hdr;
@@ -5543,71 +5177,6 @@  static struct sk_buff *ath10k_wmi_op_gen_init(struct ath10k *ar)
 	return buf;
 }
 
-static struct sk_buff *ath10k_wmi_10_1_op_gen_init(struct ath10k *ar)
-{
-	struct wmi_init_cmd_10x *cmd;
-	struct sk_buff *buf;
-	struct wmi_resource_config_10x config = {};
-	u32 len, val;
-
-	config.num_vdevs = __cpu_to_le32(TARGET_10X_NUM_VDEVS);
-	config.num_peers = __cpu_to_le32(TARGET_10X_NUM_PEERS);
-	config.num_peer_keys = __cpu_to_le32(TARGET_10X_NUM_PEER_KEYS);
-	config.num_tids = __cpu_to_le32(TARGET_10X_NUM_TIDS);
-	config.ast_skid_limit = __cpu_to_le32(TARGET_10X_AST_SKID_LIMIT);
-	config.tx_chain_mask = __cpu_to_le32(TARGET_10X_TX_CHAIN_MASK);
-	config.rx_chain_mask = __cpu_to_le32(TARGET_10X_RX_CHAIN_MASK);
-	config.rx_timeout_pri_vo = __cpu_to_le32(TARGET_10X_RX_TIMEOUT_LO_PRI);
-	config.rx_timeout_pri_vi = __cpu_to_le32(TARGET_10X_RX_TIMEOUT_LO_PRI);
-	config.rx_timeout_pri_be = __cpu_to_le32(TARGET_10X_RX_TIMEOUT_LO_PRI);
-	config.rx_timeout_pri_bk = __cpu_to_le32(TARGET_10X_RX_TIMEOUT_HI_PRI);
-	config.rx_decap_mode = __cpu_to_le32(ar->wmi.rx_decap_mode);
-	config.scan_max_pending_reqs =
-		__cpu_to_le32(TARGET_10X_SCAN_MAX_PENDING_REQS);
-
-	config.bmiss_offload_max_vdev =
-		__cpu_to_le32(TARGET_10X_BMISS_OFFLOAD_MAX_VDEV);
-
-	config.roam_offload_max_vdev =
-		__cpu_to_le32(TARGET_10X_ROAM_OFFLOAD_MAX_VDEV);
-
-	config.roam_offload_max_ap_profiles =
-		__cpu_to_le32(TARGET_10X_ROAM_OFFLOAD_MAX_AP_PROFILES);
-
-	config.num_mcast_groups = __cpu_to_le32(TARGET_10X_NUM_MCAST_GROUPS);
-	config.num_mcast_table_elems =
-		__cpu_to_le32(TARGET_10X_NUM_MCAST_TABLE_ELEMS);
-
-	config.mcast2ucast_mode = __cpu_to_le32(TARGET_10X_MCAST2UCAST_MODE);
-	config.tx_dbg_log_size = __cpu_to_le32(TARGET_10X_TX_DBG_LOG_SIZE);
-	config.num_wds_entries = __cpu_to_le32(TARGET_10X_NUM_WDS_ENTRIES);
-	config.dma_burst_size = __cpu_to_le32(TARGET_10X_DMA_BURST_SIZE);
-	config.mac_aggr_delim = __cpu_to_le32(TARGET_10X_MAC_AGGR_DELIM);
-
-	val = TARGET_10X_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK;
-	config.rx_skip_defrag_timeout_dup_detection_check = __cpu_to_le32(val);
-
-	config.vow_config = __cpu_to_le32(TARGET_10X_VOW_CONFIG);
-
-	config.num_msdu_desc = __cpu_to_le32(TARGET_10X_NUM_MSDU_DESC);
-	config.max_frag_entries = __cpu_to_le32(TARGET_10X_MAX_FRAG_ENTRIES);
-
-	len = sizeof(*cmd) +
-	      (sizeof(struct host_memory_chunk) * ar->wmi.num_mem_chunks);
-
-	buf = ath10k_wmi_alloc_skb(ar, len);
-	if (!buf)
-		return ERR_PTR(-ENOMEM);
-
-	cmd = (struct wmi_init_cmd_10x *)buf->data;
-
-	memcpy(&cmd->resource_config, &config, sizeof(config));
-	ath10k_wmi_put_host_mem_chunks(ar, &cmd->mem_chunks);
-
-	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi init 10x\n");
-	return buf;
-}
-
 static struct sk_buff *ath10k_wmi_10_2_op_gen_init(struct ath10k *ar)
 {
 	struct wmi_init_cmd_10_2 *cmd;
@@ -6555,13 +6124,6 @@  ath10k_wmi_peer_assoc_fill_main(struct ath10k *ar, void *buf,
 }
 
 static void
-ath10k_wmi_peer_assoc_fill_10_1(struct ath10k *ar, void *buf,
-				const struct wmi_peer_assoc_complete_arg *arg)
-{
-	ath10k_wmi_peer_assoc_fill(ar, buf, arg);
-}
-
-static void
 ath10k_wmi_peer_assoc_fill_10_2(struct ath10k *ar, void *buf,
 				const struct wmi_peer_assoc_complete_arg *arg)
 {
@@ -6629,31 +6191,6 @@  ath10k_wmi_op_gen_peer_assoc(struct ath10k *ar,
 }
 
 static struct sk_buff *
-ath10k_wmi_10_1_op_gen_peer_assoc(struct ath10k *ar,
-				  const struct wmi_peer_assoc_complete_arg *arg)
-{
-	size_t len = sizeof(struct wmi_10_1_peer_assoc_complete_cmd);
-	struct sk_buff *skb;
-	int ret;
-
-	ret = ath10k_wmi_peer_assoc_check_arg(arg);
-	if (ret)
-		return ERR_PTR(ret);
-
-	skb = ath10k_wmi_alloc_skb(ar, len);
-	if (!skb)
-		return ERR_PTR(-ENOMEM);
-
-	ath10k_wmi_peer_assoc_fill_10_1(ar, skb->data, arg);
-
-	ath10k_dbg(ar, ATH10K_DBG_WMI,
-		   "wmi peer assoc vdev %d addr %pM (%s)\n",
-		   arg->vdev_id, arg->addr,
-		   arg->peer_reassoc ? "reassociate" : "new");
-	return skb;
-}
-
-static struct sk_buff *
 ath10k_wmi_10_2_op_gen_peer_assoc(struct ath10k *ar,
 				  const struct wmi_peer_assoc_complete_arg *arg)
 {
@@ -7696,74 +7233,6 @@  static const struct wmi_ops wmi_ops = {
 	/* .gen_pdev_enable_adaptive_cca not implemented */
 };
 
-static const struct wmi_ops wmi_10_1_ops = {
-	.rx = ath10k_wmi_10_1_op_rx,
-	.map_svc = wmi_10x_svc_map,
-	.pull_svc_rdy = ath10k_wmi_10x_op_pull_svc_rdy_ev,
-	.pull_fw_stats = ath10k_wmi_10x_op_pull_fw_stats,
-	.gen_init = ath10k_wmi_10_1_op_gen_init,
-	.gen_pdev_set_rd = ath10k_wmi_10x_op_gen_pdev_set_rd,
-	.gen_start_scan = ath10k_wmi_10x_op_gen_start_scan,
-	.gen_peer_assoc = ath10k_wmi_10_1_op_gen_peer_assoc,
-	/* .gen_pdev_get_temperature not implemented */
-
-	/* shared with main branch */
-	.pull_scan = ath10k_wmi_op_pull_scan_ev,
-	.pull_mgmt_rx = ath10k_wmi_op_pull_mgmt_rx_ev,
-	.pull_ch_info = ath10k_wmi_op_pull_ch_info_ev,
-	.pull_vdev_start = ath10k_wmi_op_pull_vdev_start_ev,
-	.pull_peer_kick = ath10k_wmi_op_pull_peer_kick_ev,
-	.pull_swba = ath10k_wmi_op_pull_swba_ev,
-	.pull_phyerr_hdr = ath10k_wmi_op_pull_phyerr_ev_hdr,
-	.pull_phyerr = ath10k_wmi_op_pull_phyerr_ev,
-	.pull_rdy = ath10k_wmi_op_pull_rdy_ev,
-	.pull_roam_ev = ath10k_wmi_op_pull_roam_ev,
-
-	.gen_pdev_suspend = ath10k_wmi_op_gen_pdev_suspend,
-	.gen_pdev_resume = ath10k_wmi_op_gen_pdev_resume,
-	.gen_pdev_set_param = ath10k_wmi_op_gen_pdev_set_param,
-	.gen_stop_scan = ath10k_wmi_op_gen_stop_scan,
-	.gen_vdev_create = ath10k_wmi_op_gen_vdev_create,
-	.gen_vdev_delete = ath10k_wmi_op_gen_vdev_delete,
-	.gen_vdev_start = ath10k_wmi_op_gen_vdev_start,
-	.gen_vdev_stop = ath10k_wmi_op_gen_vdev_stop,
-	.gen_vdev_up = ath10k_wmi_op_gen_vdev_up,
-	.gen_vdev_down = ath10k_wmi_op_gen_vdev_down,
-	.gen_vdev_set_param = ath10k_wmi_op_gen_vdev_set_param,
-	.gen_vdev_install_key = ath10k_wmi_op_gen_vdev_install_key,
-	.gen_vdev_spectral_conf = ath10k_wmi_op_gen_vdev_spectral_conf,
-	.gen_vdev_spectral_enable = ath10k_wmi_op_gen_vdev_spectral_enable,
-	/* .gen_vdev_wmm_conf not implemented */
-	.gen_peer_create = ath10k_wmi_op_gen_peer_create,
-	.gen_peer_delete = ath10k_wmi_op_gen_peer_delete,
-	.gen_peer_flush = ath10k_wmi_op_gen_peer_flush,
-	.gen_peer_set_param = ath10k_wmi_op_gen_peer_set_param,
-	.gen_set_psmode = ath10k_wmi_op_gen_set_psmode,
-	.gen_set_sta_ps = ath10k_wmi_op_gen_set_sta_ps,
-	.gen_set_ap_ps = ath10k_wmi_op_gen_set_ap_ps,
-	.gen_scan_chan_list = ath10k_wmi_op_gen_scan_chan_list,
-	.gen_beacon_dma = ath10k_wmi_op_gen_beacon_dma,
-	.gen_pdev_set_wmm = ath10k_wmi_op_gen_pdev_set_wmm,
-	.gen_request_stats = ath10k_wmi_op_gen_request_stats,
-	.gen_force_fw_hang = ath10k_wmi_op_gen_force_fw_hang,
-	.gen_mgmt_tx = ath10k_wmi_op_gen_mgmt_tx,
-	.gen_dbglog_cfg = ath10k_wmi_op_gen_dbglog_cfg,
-	.gen_pktlog_enable = ath10k_wmi_op_gen_pktlog_enable,
-	.gen_pktlog_disable = ath10k_wmi_op_gen_pktlog_disable,
-	.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
-	.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
-	.gen_addba_send = ath10k_wmi_op_gen_addba_send,
-	.gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
-	.gen_delba_send = ath10k_wmi_op_gen_delba_send,
-	.fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill,
-	.get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
-	/* .gen_bcn_tmpl not implemented */
-	/* .gen_prb_tmpl not implemented */
-	/* .gen_p2p_go_bcn_ie not implemented */
-	/* .gen_adaptive_qcs not implemented */
-	/* .gen_pdev_enable_adaptive_cca not implemented */
-};
-
 static const struct wmi_ops wmi_10_2_ops = {
 	.rx = ath10k_wmi_10_2_op_rx,
 	.pull_fw_stats = ath10k_wmi_10_2_op_pull_fw_stats,
@@ -7771,7 +7240,7 @@  static const struct wmi_ops wmi_10_2_ops = {
 	.gen_peer_assoc = ath10k_wmi_10_2_op_gen_peer_assoc,
 	/* .gen_pdev_get_temperature not implemented */
 
-	/* shared with 10.1 */
+	/* shared with 10.2.4 */
 	.map_svc = wmi_10x_svc_map,
 	.pull_svc_rdy = ath10k_wmi_10x_op_pull_svc_rdy_ev,
 	.gen_pdev_set_rd = ath10k_wmi_10x_op_gen_pdev_set_rd,
@@ -7837,7 +7306,7 @@  static const struct wmi_ops wmi_10_2_4_ops = {
 	.gen_pdev_get_temperature = ath10k_wmi_10_2_op_gen_pdev_get_temperature,
 	.gen_pdev_bss_chan_info_req = ath10k_wmi_10_2_op_gen_pdev_bss_chan_info,
 
-	/* shared with 10.1 */
+	/* shared with 10.2 */
 	.map_svc = wmi_10x_svc_map,
 	.pull_svc_rdy = ath10k_wmi_10x_op_pull_svc_rdy_ev,
 	.gen_pdev_set_rd = ath10k_wmi_10x_op_gen_pdev_set_rd,
@@ -7989,13 +7458,6 @@  int ath10k_wmi_attach(struct ath10k *ar)
 		ar->wmi.pdev_param = &wmi_10x_pdev_param_map;
 		ar->wmi.peer_flags = &wmi_10_2_peer_flags_map;
 		break;
-	case ATH10K_FW_WMI_OP_VERSION_10_1:
-		ar->wmi.cmd = &wmi_10x_cmd_map;
-		ar->wmi.ops = &wmi_10_1_ops;
-		ar->wmi.vdev_param = &wmi_10x_vdev_param_map;
-		ar->wmi.pdev_param = &wmi_10x_pdev_param_map;
-		ar->wmi.peer_flags = &wmi_10x_peer_flags_map;
-		break;
 	case ATH10K_FW_WMI_OP_VERSION_MAIN:
 		ar->wmi.cmd = &wmi_cmd_map;
 		ar->wmi.ops = &wmi_ops;
@@ -8006,6 +7468,7 @@  int ath10k_wmi_attach(struct ath10k *ar)
 	case ATH10K_FW_WMI_OP_VERSION_TLV:
 		ath10k_wmi_tlv_attach(ar);
 		break;
+	case ATH10K_FW_WMI_OP_VERSION_10_1:
 	case ATH10K_FW_WMI_OP_VERSION_UNSET:
 	case ATH10K_FW_WMI_OP_VERSION_MAX:
 		ath10k_err(ar, "unsupported WMI op version: %d\n",
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 90f594e89f94..940ce480bcb8 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -1116,217 +1116,6 @@  enum wmi_event_id {
 	WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO),
 };
 
-/* Command IDs and command events for 10.X firmware */
-enum wmi_10x_cmd_id {
-	WMI_10X_START_CMDID = 0x9000,
-	WMI_10X_END_CMDID = 0x9FFF,
-
-	/* initialize the wlan sub system */
-	WMI_10X_INIT_CMDID,
-
-	/* Scan specific commands */
-
-	WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID,
-	WMI_10X_STOP_SCAN_CMDID,
-	WMI_10X_SCAN_CHAN_LIST_CMDID,
-	WMI_10X_ECHO_CMDID,
-
-	/* PDEV(physical device) specific commands */
-	WMI_10X_PDEV_SET_REGDOMAIN_CMDID,
-	WMI_10X_PDEV_SET_CHANNEL_CMDID,
-	WMI_10X_PDEV_SET_PARAM_CMDID,
-	WMI_10X_PDEV_PKTLOG_ENABLE_CMDID,
-	WMI_10X_PDEV_PKTLOG_DISABLE_CMDID,
-	WMI_10X_PDEV_SET_WMM_PARAMS_CMDID,
-	WMI_10X_PDEV_SET_HT_CAP_IE_CMDID,
-	WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID,
-	WMI_10X_PDEV_SET_BASE_MACADDR_CMDID,
-	WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID,
-	WMI_10X_PDEV_SET_QUIET_MODE_CMDID,
-	WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID,
-	WMI_10X_PDEV_GET_TPC_CONFIG_CMDID,
-
-	/* VDEV(virtual device) specific commands */
-	WMI_10X_VDEV_CREATE_CMDID,
-	WMI_10X_VDEV_DELETE_CMDID,
-	WMI_10X_VDEV_START_REQUEST_CMDID,
-	WMI_10X_VDEV_RESTART_REQUEST_CMDID,
-	WMI_10X_VDEV_UP_CMDID,
-	WMI_10X_VDEV_STOP_CMDID,
-	WMI_10X_VDEV_DOWN_CMDID,
-	WMI_10X_VDEV_STANDBY_RESPONSE_CMDID,
-	WMI_10X_VDEV_RESUME_RESPONSE_CMDID,
-	WMI_10X_VDEV_SET_PARAM_CMDID,
-	WMI_10X_VDEV_INSTALL_KEY_CMDID,
-
-	/* peer specific commands */
-	WMI_10X_PEER_CREATE_CMDID,
-	WMI_10X_PEER_DELETE_CMDID,
-	WMI_10X_PEER_FLUSH_TIDS_CMDID,
-	WMI_10X_PEER_SET_PARAM_CMDID,
-	WMI_10X_PEER_ASSOC_CMDID,
-	WMI_10X_PEER_ADD_WDS_ENTRY_CMDID,
-	WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID,
-	WMI_10X_PEER_MCAST_GROUP_CMDID,
-
-	/* beacon/management specific commands */
-
-	WMI_10X_BCN_TX_CMDID,
-	WMI_10X_BCN_PRB_TMPL_CMDID,
-	WMI_10X_BCN_FILTER_RX_CMDID,
-	WMI_10X_PRB_REQ_FILTER_RX_CMDID,
-	WMI_10X_MGMT_TX_CMDID,
-
-	/* commands to directly control ba negotiation directly from host. */
-	WMI_10X_ADDBA_CLEAR_RESP_CMDID,
-	WMI_10X_ADDBA_SEND_CMDID,
-	WMI_10X_ADDBA_STATUS_CMDID,
-	WMI_10X_DELBA_SEND_CMDID,
-	WMI_10X_ADDBA_SET_RESP_CMDID,
-	WMI_10X_SEND_SINGLEAMSDU_CMDID,
-
-	/* Station power save specific config */
-	WMI_10X_STA_POWERSAVE_MODE_CMDID,
-	WMI_10X_STA_POWERSAVE_PARAM_CMDID,
-	WMI_10X_STA_MIMO_PS_MODE_CMDID,
-
-	/* set debug log config */
-	WMI_10X_DBGLOG_CFG_CMDID,
-
-	/* DFS-specific commands */
-	WMI_10X_PDEV_DFS_ENABLE_CMDID,
-	WMI_10X_PDEV_DFS_DISABLE_CMDID,
-
-	/* QVIT specific command id */
-	WMI_10X_PDEV_QVIT_CMDID,
-
-	/* Offload Scan and Roaming related  commands */
-	WMI_10X_ROAM_SCAN_MODE,
-	WMI_10X_ROAM_SCAN_RSSI_THRESHOLD,
-	WMI_10X_ROAM_SCAN_PERIOD,
-	WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
-	WMI_10X_ROAM_AP_PROFILE,
-	WMI_10X_OFL_SCAN_ADD_AP_PROFILE,
-	WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE,
-	WMI_10X_OFL_SCAN_PERIOD,
-
-	/* P2P specific commands */
-	WMI_10X_P2P_DEV_SET_DEVICE_INFO,
-	WMI_10X_P2P_DEV_SET_DISCOVERABILITY,
-	WMI_10X_P2P_GO_SET_BEACON_IE,
-	WMI_10X_P2P_GO_SET_PROBE_RESP_IE,
-
-	/* AP power save specific config */
-	WMI_10X_AP_PS_PEER_PARAM_CMDID,
-	WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID,
-
-	/* Rate-control specific commands */
-	WMI_10X_PEER_RATE_RETRY_SCHED_CMDID,
-
-	/* WLAN Profiling commands. */
-	WMI_10X_WLAN_PROFILE_TRIGGER_CMDID,
-	WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
-	WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
-	WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
-	WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
-
-	/* Suspend resume command Ids */
-	WMI_10X_PDEV_SUSPEND_CMDID,
-	WMI_10X_PDEV_RESUME_CMDID,
-
-	/* Beacon filter commands */
-	WMI_10X_ADD_BCN_FILTER_CMDID,
-	WMI_10X_RMV_BCN_FILTER_CMDID,
-
-	/* WOW Specific WMI commands*/
-	WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID,
-	WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID,
-	WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
-	WMI_10X_WOW_ENABLE_CMDID,
-	WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
-
-	/* RTT measurement related cmd */
-	WMI_10X_RTT_MEASREQ_CMDID,
-	WMI_10X_RTT_TSF_CMDID,
-
-	/* transmit beacon by value */
-	WMI_10X_PDEV_SEND_BCN_CMDID,
-
-	/* F/W stats */
-	WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
-	WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
-	WMI_10X_REQUEST_STATS_CMDID,
-
-	/* GPIO Configuration */
-	WMI_10X_GPIO_CONFIG_CMDID,
-	WMI_10X_GPIO_OUTPUT_CMDID,
-
-	WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1,
-};
-
-enum wmi_10x_event_id {
-	WMI_10X_SERVICE_READY_EVENTID = 0x8000,
-	WMI_10X_READY_EVENTID,
-	WMI_10X_START_EVENTID = 0x9000,
-	WMI_10X_END_EVENTID = 0x9FFF,
-
-	/* Scan specific events */
-	WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID,
-	WMI_10X_ECHO_EVENTID,
-	WMI_10X_DEBUG_MESG_EVENTID,
-	WMI_10X_UPDATE_STATS_EVENTID,
-
-	/* Instantaneous RSSI event */
-	WMI_10X_INST_RSSI_STATS_EVENTID,
-
-	/* VDEV specific events */
-	WMI_10X_VDEV_START_RESP_EVENTID,
-	WMI_10X_VDEV_STANDBY_REQ_EVENTID,
-	WMI_10X_VDEV_RESUME_REQ_EVENTID,
-	WMI_10X_VDEV_STOPPED_EVENTID,
-
-	/* peer  specific events */
-	WMI_10X_PEER_STA_KICKOUT_EVENTID,
-
-	/* beacon/mgmt specific events */
-	WMI_10X_HOST_SWBA_EVENTID,
-	WMI_10X_TBTTOFFSET_UPDATE_EVENTID,
-	WMI_10X_MGMT_RX_EVENTID,
-
-	/* Channel stats event */
-	WMI_10X_CHAN_INFO_EVENTID,
-
-	/* PHY Error specific WMI event */
-	WMI_10X_PHYERR_EVENTID,
-
-	/* Roam event to trigger roaming on host */
-	WMI_10X_ROAM_EVENTID,
-
-	/* matching AP found from list of profiles */
-	WMI_10X_PROFILE_MATCH,
-
-	/* debug print message used for tracing FW code while debugging */
-	WMI_10X_DEBUG_PRINT_EVENTID,
-	/* VI spoecific event */
-	WMI_10X_PDEV_QVIT_EVENTID,
-	/* FW code profile data in response to profile request */
-	WMI_10X_WLAN_PROFILE_DATA_EVENTID,
-
-	/*RTT related event ID*/
-	WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID,
-	WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID,
-	WMI_10X_RTT_ERROR_REPORT_EVENTID,
-
-	WMI_10X_WOW_WAKEUP_HOST_EVENTID,
-	WMI_10X_DCS_INTERFERENCE_EVENTID,
-
-	/* TPC config for the current operating channel */
-	WMI_10X_PDEV_TPC_CONFIG_EVENTID,
-
-	WMI_10X_GPIO_INPUT_EVENTID,
-	WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID - 1,
-};
-
 enum wmi_10_2_cmd_id {
 	WMI_10_2_START_CMDID = 0x9000,
 	WMI_10_2_END_CMDID = 0x9FFF,
@@ -2739,12 +2528,6 @@  struct wmi_init_cmd {
 	struct wmi_host_mem_chunks mem_chunks;
 } __packed;
 
-/* _10x stucture is from 10.X FW API */
-struct wmi_init_cmd_10x {
-	struct wmi_resource_config_10x resource_config;
-	struct wmi_host_mem_chunks mem_chunks;
-} __packed;
-
 struct wmi_init_cmd_10_2 {
 	struct wmi_resource_config_10_2 resource_config;
 	struct wmi_host_mem_chunks mem_chunks;
@@ -4241,14 +4024,6 @@  struct wmi_pdev_stats_extra {
 	__le32 mib_int_count;
 } __packed;
 
-struct wmi_10x_pdev_stats {
-	struct wmi_pdev_stats_base base;
-	struct wmi_pdev_stats_tx tx;
-	struct wmi_pdev_stats_rx rx;
-	struct wmi_pdev_stats_peer peer;
-	struct wmi_pdev_stats_extra extra;
-} __packed;
-
 struct wmi_pdev_stats_mem {
 	__le32 dram_free;
 	__le32 iram_free;
@@ -5863,23 +5638,6 @@  enum wmi_peer_flags {
 	WMI_PEER_PMF = 0x10000000,
 };
 
-enum wmi_10x_peer_flags {
-	WMI_10X_PEER_AUTH = 0x00000001,
-	WMI_10X_PEER_QOS = 0x00000002,
-	WMI_10X_PEER_NEED_PTK_4_WAY = 0x00000004,
-	WMI_10X_PEER_NEED_GTK_2_WAY = 0x00000010,
-	WMI_10X_PEER_APSD = 0x00000800,
-	WMI_10X_PEER_HT = 0x00001000,
-	WMI_10X_PEER_40MHZ = 0x00002000,
-	WMI_10X_PEER_STBC = 0x00008000,
-	WMI_10X_PEER_LDPC = 0x00010000,
-	WMI_10X_PEER_DYN_MIMOPS = 0x00020000,
-	WMI_10X_PEER_STATIC_MIMOPS = 0x00040000,
-	WMI_10X_PEER_SPATIAL_MUX = 0x00200000,
-	WMI_10X_PEER_VHT = 0x02000000,
-	WMI_10X_PEER_80MHZ = 0x04000000,
-};
-
 enum wmi_10_2_peer_flags {
 	WMI_10_2_PEER_AUTH = 0x00000001,
 	WMI_10_2_PEER_QOS = 0x00000002,
@@ -5949,10 +5707,6 @@  struct wmi_main_peer_assoc_complete_cmd {
 	__le32 peer_ht_info[2];
 } __packed;
 
-struct wmi_10_1_peer_assoc_complete_cmd {
-	struct wmi_common_peer_assoc_complete_cmd cmd;
-} __packed;
-
 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 0
 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f
 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 4