diff mbox series

ath10k: fix max antenna gain unit

Message ID 20190611121910.27643-1-sven@narfation.org (mailing list archive)
State Superseded, archived
Headers show
Series ath10k: fix max antenna gain unit | expand

Commit Message

Sven Eckelmann June 11, 2019, 12:19 p.m. UTC
From: Sven Eckelmann <seckelmann@datto.com>

Most of the txpower for the ath10k firmware is stored as twicepower (0.5 dB
steps). This isn't the case for max_antenna_gain - which is still expected
by the firmware as dB.

The firmware is converting it from dB to the internal (twicepower)
representation when it calculates the limits of a channel. This can be seen
in tpc_stats when configuring "12" as max_antenna_gain. Instead of the
expected 12 (6 dB), the tpc_stats shows 24 (12 dB).

Tested on QCA9888 and IPQ4019 with firmware 10.4-3.5.3-00057.

Fixes: 02256930d9b8 ("ath10k: use proper tx power unit")
Signed-off-by: Sven Eckelmann <seckelmann@datto.com>
---
Cc: Michal Kazior <michal@plume.com>

 drivers/net/wireless/ath/ath10k/mac.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Comments

Ben Greear June 11, 2019, 4:29 p.m. UTC | #1
On 6/11/19 5:19 AM, Sven Eckelmann wrote:
> From: Sven Eckelmann <seckelmann@datto.com>
> 
> Most of the txpower for the ath10k firmware is stored as twicepower (0.5 dB
> steps). This isn't the case for max_antenna_gain - which is still expected
> by the firmware as dB.
> 
> The firmware is converting it from dB to the internal (twicepower)
> representation when it calculates the limits of a channel. This can be seen
> in tpc_stats when configuring "12" as max_antenna_gain. Instead of the
> expected 12 (6 dB), the tpc_stats shows 24 (12 dB).
> 
> Tested on QCA9888 and IPQ4019 with firmware 10.4-3.5.3-00057.

I did a visual inspection of wave-1 firmware source and it appears this change would be correct
for it as well.

I would also suggest updating the comments in the wmi.h structure to document the
units.

Thanks,
Ben

> 
> Fixes: 02256930d9b8 ("ath10k: use proper tx power unit")
> Signed-off-by: Sven Eckelmann <seckelmann@datto.com>
> ---
> Cc: Michal Kazior <michal@plume.com>
> 
>   drivers/net/wireless/ath/ath10k/mac.c | 6 +++---
>   1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
> index 9c703d287333..35d026a2772a 100644
> --- a/drivers/net/wireless/ath/ath10k/mac.c
> +++ b/drivers/net/wireless/ath/ath10k/mac.c
> @@ -1008,7 +1008,7 @@ static int ath10k_monitor_vdev_start(struct ath10k *ar, int vdev_id)
>   	arg.channel.min_power = 0;
>   	arg.channel.max_power = channel->max_power * 2;
>   	arg.channel.max_reg_power = channel->max_reg_power * 2;
> -	arg.channel.max_antenna_gain = channel->max_antenna_gain * 2;
> +	arg.channel.max_antenna_gain = channel->max_antenna_gain;
>   
>   	reinit_completion(&ar->vdev_setup_done);
>   
> @@ -1450,7 +1450,7 @@ static int ath10k_vdev_start_restart(struct ath10k_vif *arvif,
>   	arg.channel.min_power = 0;
>   	arg.channel.max_power = chandef->chan->max_power * 2;
>   	arg.channel.max_reg_power = chandef->chan->max_reg_power * 2;
> -	arg.channel.max_antenna_gain = chandef->chan->max_antenna_gain * 2;
> +	arg.channel.max_antenna_gain = chandef->chan->max_antenna_gain;
>   
>   	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
>   		arg.ssid = arvif->u.ap.ssid;
> @@ -3105,7 +3105,7 @@ static int ath10k_update_channel_list(struct ath10k *ar)
>   			ch->min_power = 0;
>   			ch->max_power = channel->max_power * 2;
>   			ch->max_reg_power = channel->max_reg_power * 2;
> -			ch->max_antenna_gain = channel->max_antenna_gain * 2;
> +			ch->max_antenna_gain = channel->max_antenna_gain;
>   			ch->reg_class_id = 0; /* FIXME */
>   
>   			/* FIXME: why use only legacy modes, why not any
>
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 9c703d287333..35d026a2772a 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1008,7 +1008,7 @@  static int ath10k_monitor_vdev_start(struct ath10k *ar, int vdev_id)
 	arg.channel.min_power = 0;
 	arg.channel.max_power = channel->max_power * 2;
 	arg.channel.max_reg_power = channel->max_reg_power * 2;
-	arg.channel.max_antenna_gain = channel->max_antenna_gain * 2;
+	arg.channel.max_antenna_gain = channel->max_antenna_gain;
 
 	reinit_completion(&ar->vdev_setup_done);
 
@@ -1450,7 +1450,7 @@  static int ath10k_vdev_start_restart(struct ath10k_vif *arvif,
 	arg.channel.min_power = 0;
 	arg.channel.max_power = chandef->chan->max_power * 2;
 	arg.channel.max_reg_power = chandef->chan->max_reg_power * 2;
-	arg.channel.max_antenna_gain = chandef->chan->max_antenna_gain * 2;
+	arg.channel.max_antenna_gain = chandef->chan->max_antenna_gain;
 
 	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
 		arg.ssid = arvif->u.ap.ssid;
@@ -3105,7 +3105,7 @@  static int ath10k_update_channel_list(struct ath10k *ar)
 			ch->min_power = 0;
 			ch->max_power = channel->max_power * 2;
 			ch->max_reg_power = channel->max_reg_power * 2;
-			ch->max_antenna_gain = channel->max_antenna_gain * 2;
+			ch->max_antenna_gain = channel->max_antenna_gain;
 			ch->reg_class_id = 0; /* FIXME */
 
 			/* FIXME: why use only legacy modes, why not any