diff mbox series

[4.4.y-cip,08/14] ARM: dts: r8a7742-iwg21d-q7: Add SPI NOR support

Message ID 20201109155011.10291-9-prabhakar.mahadev-lad.rj@bp.renesas.com (mailing list archive)
State Accepted
Delegated to: Nobuhiro Iwamatsu
Headers show
Series Renesas RZ/G1H add support for CAN, IPMMU, QSPI, RTC | expand

Commit Message

Lad Prabhakar Nov. 9, 2020, 3:50 p.m. UTC 
commit 8368ca1540f0ff5bf4cfe92b1ea7fc8045f61d50 upstream.

Add support for the SPI NOR device which is connected to MSIOF0 interface
on the iWave RainboW-G21d-q7 board.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Link: https://lore.kernel.org/r/20200907155541.2011-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[PL: Manually applied the changes]
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 arch/arm/boot/dts/r8a7742-iwg21d-q7.dts | 31 +++++++++++++++++++++++++
 1 file changed, 31 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
index 858d206514e0..728664e901fc 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
@@ -134,6 +134,32 @@ 
 	status = "okay";
 };
 
+&msiof0 {
+	pinctrl-0 = <&msiof0_pins>;
+	pinctrl-names = "default";
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+
+	flash1: flash@0 {
+		compatible = "sst,sst25vf016b", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "user";
+				reg = <0x00000000 0x00200000>;
+			};
+		};
+	};
+};
+
 &pcie_bus_clk {
 	clock-frequency = <100000000>;
 };
@@ -157,6 +183,11 @@ 
 		function = "i2c2";
 	};
 
+	msiof0_pins: msiof0 {
+		groups = "msiof0_clk", "msiof0_sync", "msiof0_tx", "msiof0_rx";
+		function = "msiof0";
+	};
+
 	scifa2_pins: scifa2 {
 		groups = "scifa2_data_c";
 		function = "scifa2";