diff mbox series

[v2,2/5] arm64: dts: qcom: sm8350: switch to combo usb3/dp phy

Message ID 20230206-topic-sm8450-upstream-dp-controller-v2-2-529da2203659@linaro.org (mailing list archive)
State New, archived
Headers show
Series arm64: dts: qcom: add DP Controller to SM8350 & SM8450 DTS | expand

Commit Message

Neil Armstrong Feb. 10, 2023, 10:34 a.m. UTC
The first QMP PHY is an USB3/DP combo phy, switch to the newly
documented bindings and register the clocks to the GCC
and DISPCC controllers.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 40 ++++++++++++------------------------
 1 file changed, 13 insertions(+), 27 deletions(-)

Comments

Konrad Dybcio Feb. 10, 2023, 11 a.m. UTC | #1
On 10.02.2023 11:34, Neil Armstrong wrote:
> The first QMP PHY is an USB3/DP combo phy, switch to the newly
> documented bindings and register the clocks to the GCC
> and DISPCC controllers.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/sm8350.dtsi | 40 ++++++++++++------------------------
>  1 file changed, 13 insertions(+), 27 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> index 04bb838189a6..d490ce84a022 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> @@ -652,7 +652,7 @@ gcc: clock-controller@100000 {
>  				 <&ufs_mem_phy_lanes 0>,
>  				 <&ufs_mem_phy_lanes 1>,
>  				 <&ufs_mem_phy_lanes 2>,
> -				 <0>,
> +				 <&usb_1_qmpphy 0>,
Please use the defines from include/dt-bindings/phy/phy-qcom-qmp.h

>  				 <0>;
>  		};
>  
> @@ -2601,37 +2601,24 @@ usb_2_hsphy: phy@88e4000 {
>  			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
>  		};
>  
> -		usb_1_qmpphy: phy-wrapper@88e9000 {
> -			compatible = "qcom,sm8350-qmp-usb3-phy";
> -			reg = <0 0x088e9000 0 0x200>,
> -			      <0 0x088e8000 0 0x20>;
> -			status = "disabled";
> -			#address-cells = <2>;
> -			#size-cells = <2>;
> -			ranges;
> +		usb_1_qmpphy: phy@88e9000 {
> +			compatible = "qcom,sm8350-qmp-usb3-dp-phy";
> +			reg = <0 0x088e8000 0 0x3000>;
>  
>  			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
>  				 <&rpmhcc RPMH_CXO_CLK>,
> -				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
> -			clock-names = "aux", "ref_clk_src", "com_aux";
> +				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
> +				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
> +			clock-names = "aux", "ref", "com_aux", "usb3_pipe";
>  
>  			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
>  				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
>  			reset-names = "phy", "common";
>  
> -			usb_1_ssphy: phy@88e9200 {
> -				reg = <0 0x088e9200 0 0x200>,
> -				      <0 0x088e9400 0 0x200>,
> -				      <0 0x088e9c00 0 0x400>,
> -				      <0 0x088e9600 0 0x200>,
> -				      <0 0x088e9800 0 0x200>,
> -				      <0 0x088e9a00 0 0x100>;
> -				#phy-cells = <0>;
> -				#clock-cells = <0>;
> -				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
> -				clock-names = "pipe0";
> -				clock-output-names = "usb3_phy_pipe_clk_src";
> -			};
> +			#clock-cells = <1>;
> +			#phy-cells = <1>;
> +
> +			status = "disabled";
>  		};
>  
>  		usb_2_qmpphy: phy-wrapper@88eb000 {
> @@ -2727,7 +2714,7 @@ usb_1_dwc3: usb@a600000 {
>  				iommus = <&apps_smmu 0x0 0x0>;
>  				snps,dis_u2_susphy_quirk;
>  				snps,dis_enblslpm_quirk;
> -				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
> +				phys = <&usb_1_hsphy>, <&usb_1_qmpphy 0>;
And here too.

Otherwise LGTM!

Konrad
>  				phy-names = "usb2-phy", "usb3-phy";
>  			};
>  		};
> @@ -3092,8 +3079,7 @@ dispcc: clock-controller@af00000 {
>  			clocks = <&rpmhcc RPMH_CXO_CLK>,
>  				 <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>,
>  				 <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>,
> -				 <0>,
> -				 <0>;
> +				 <&usb_1_qmpphy 1>, <&usb_1_qmpphy 2>;
>  			clock-names = "bi_tcxo",
>  				      "dsi0_phy_pll_out_byteclk",
>  				      "dsi0_phy_pll_out_dsiclk",
>
Dmitry Baryshkov Feb. 10, 2023, 11:06 a.m. UTC | #2
On 10/02/2023 12:34, Neil Armstrong wrote:
> The first QMP PHY is an USB3/DP combo phy, switch to the newly
> documented bindings and register the clocks to the GCC
> and DISPCC controllers.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

With the following few nits fixed:
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

> ---
>   arch/arm64/boot/dts/qcom/sm8350.dtsi | 40 ++++++++++++------------------------
>   1 file changed, 13 insertions(+), 27 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> index 04bb838189a6..d490ce84a022 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> @@ -652,7 +652,7 @@ gcc: clock-controller@100000 {
>   				 <&ufs_mem_phy_lanes 0>,
>   				 <&ufs_mem_phy_lanes 1>,
>   				 <&ufs_mem_phy_lanes 2>,
> -				 <0>,
> +				 <&usb_1_qmpphy 0>,


<&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK> ?


>   				 <0>;
>   		};
>   
> @@ -2601,37 +2601,24 @@ usb_2_hsphy: phy@88e4000 {
>   			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
>   		};
>   
> -		usb_1_qmpphy: phy-wrapper@88e9000 {
> -			compatible = "qcom,sm8350-qmp-usb3-phy";
> -			reg = <0 0x088e9000 0 0x200>,
> -			      <0 0x088e8000 0 0x20>;
> -			status = "disabled";
> -			#address-cells = <2>;
> -			#size-cells = <2>;
> -			ranges;
> +		usb_1_qmpphy: phy@88e9000 {
> +			compatible = "qcom,sm8350-qmp-usb3-dp-phy";
> +			reg = <0 0x088e8000 0 0x3000>;
>   
>   			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
>   				 <&rpmhcc RPMH_CXO_CLK>,
> -				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
> -			clock-names = "aux", "ref_clk_src", "com_aux";
> +				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
> +				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
> +			clock-names = "aux", "ref", "com_aux", "usb3_pipe";
>   
>   			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
>   				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
>   			reset-names = "phy", "common";
>   
> -			usb_1_ssphy: phy@88e9200 {
> -				reg = <0 0x088e9200 0 0x200>,
> -				      <0 0x088e9400 0 0x200>,
> -				      <0 0x088e9c00 0 0x400>,
> -				      <0 0x088e9600 0 0x200>,
> -				      <0 0x088e9800 0 0x200>,
> -				      <0 0x088e9a00 0 0x100>;
> -				#phy-cells = <0>;
> -				#clock-cells = <0>;
> -				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
> -				clock-names = "pipe0";
> -				clock-output-names = "usb3_phy_pipe_clk_src";
> -			};
> +			#clock-cells = <1>;
> +			#phy-cells = <1>;
> +
> +			status = "disabled";
>   		};
>   
>   		usb_2_qmpphy: phy-wrapper@88eb000 {
> @@ -2727,7 +2714,7 @@ usb_1_dwc3: usb@a600000 {
>   				iommus = <&apps_smmu 0x0 0x0>;
>   				snps,dis_u2_susphy_quirk;
>   				snps,dis_enblslpm_quirk;
> -				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
> +				phys = <&usb_1_hsphy>, <&usb_1_qmpphy 0>;


<&usb_1_qmpphy QMP_USB43DP_USB3_PHY> ?


>   				phy-names = "usb2-phy", "usb3-phy";
>   			};
>   		};
> @@ -3092,8 +3079,7 @@ dispcc: clock-controller@af00000 {
>   			clocks = <&rpmhcc RPMH_CXO_CLK>,
>   				 <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>,
>   				 <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>,
> -				 <0>,
> -				 <0>;
> +				 <&usb_1_qmpphy 1>, <&usb_1_qmpphy 2>;

<&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, <&usb_1_qmpphy 
QMP_USB43DP_DP_VCO_DIV_CLK>

>   			clock-names = "bi_tcxo",
>   				      "dsi0_phy_pll_out_byteclk",
>   				      "dsi0_phy_pll_out_dsiclk",
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 04bb838189a6..d490ce84a022 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -652,7 +652,7 @@  gcc: clock-controller@100000 {
 				 <&ufs_mem_phy_lanes 0>,
 				 <&ufs_mem_phy_lanes 1>,
 				 <&ufs_mem_phy_lanes 2>,
-				 <0>,
+				 <&usb_1_qmpphy 0>,
 				 <0>;
 		};
 
@@ -2601,37 +2601,24 @@  usb_2_hsphy: phy@88e4000 {
 			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
 		};
 
-		usb_1_qmpphy: phy-wrapper@88e9000 {
-			compatible = "qcom,sm8350-qmp-usb3-phy";
-			reg = <0 0x088e9000 0 0x200>,
-			      <0 0x088e8000 0 0x20>;
-			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+		usb_1_qmpphy: phy@88e9000 {
+			compatible = "qcom,sm8350-qmp-usb3-dp-phy";
+			reg = <0 0x088e8000 0 0x3000>;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "com_aux";
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux", "ref", "com_aux", "usb3_pipe";
 
 			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
 				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: phy@88e9200 {
-				reg = <0 0x088e9200 0 0x200>,
-				      <0 0x088e9400 0 0x200>,
-				      <0 0x088e9c00 0 0x400>,
-				      <0 0x088e9600 0 0x200>,
-				      <0 0x088e9800 0 0x200>,
-				      <0 0x088e9a00 0 0x100>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			status = "disabled";
 		};
 
 		usb_2_qmpphy: phy-wrapper@88eb000 {
@@ -2727,7 +2714,7 @@  usb_1_dwc3: usb@a600000 {
 				iommus = <&apps_smmu 0x0 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy 0>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -3092,8 +3079,7 @@  dispcc: clock-controller@af00000 {
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>,
 				 <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>,
-				 <0>,
-				 <0>;
+				 <&usb_1_qmpphy 1>, <&usb_1_qmpphy 2>;
 			clock-names = "bi_tcxo",
 				      "dsi0_phy_pll_out_byteclk",
 				      "dsi0_phy_pll_out_dsiclk",