Show patches with: Submitter = Lee Shawn C       |    State = Action Required       |   206 patches
« 1 2 3 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[1/2] drm/i915: Add new AML_ULX support list [1/2] drm/i915: Add new AML_ULX support list - - - --- 2018-09-27 Lee Shawn C New
[1/2] drm/i915: Refine eDP aux backlight enable/disable sequence [1/2] drm/i915: Refine eDP aux backlight enable/disable sequence - - - --- 2019-06-14 Lee Shawn C New
[1/2] drm/i915/cml: Remove unsupport PCI ID [1/2] drm/i915/cml: Remove unsupport PCI ID - - - --- 2019-10-25 Lee Shawn C New
[1/3] drm: Add support for device_id based detection. add LG panel to dpcd quirk database - 1 - --- 2018-09-10 Lee Shawn C New
[1/5] drm/i915/dsi: send correct gpio_number on gen11 platform MIPI DSI driver enhancements - - - --- 2021-07-19 Lee Shawn C New
[1/5] drm/i915/dsi: wait for header and payload credit available DSI driver improvement - 1 - --- 2021-09-01 Lee Shawn C New
[2/2] drm/i915: Add backlight enable on/off delay for DP aux backlight control [1/2] drm/i915: Refine eDP aux backlight enable/disable sequence - - - --- 2019-06-14 Lee Shawn C New
[2/2] drm/i915: Apply correct ddi translation table for AML device [1/2] drm/i915: Add new AML_ULX support list - 1 - --- 2018-09-27 Lee Shawn C New
[2/2] drm/i915/cml: Separate U sereis pci id from origianl list. [1/2] drm/i915/cml: Remove unsupport PCI ID - - - --- 2019-10-25 Lee Shawn C New
[2/2] drm/i915/cml: Separate U series pci id from origianl list. drm/i915/cml: Remove unsupport PCI ID - - - --- 2019-12-10 Lee Shawn C New
[2/3] drm: Change limited M/N quirk to constant N quirk. add LG panel to dpcd quirk database - 1 - --- 2018-09-10 Lee Shawn C New
[2/5] drm/i915/dsi: refine send MIPI DCS command sequence DSI driver improvement - 1 - --- 2021-09-01 Lee Shawn C New
[2/5] drm/i915/jsl: program DSI panel GPIOs MIPI DSI driver enhancements - - - --- 2021-07-19 Lee Shawn C New
[3/3] drm: add LG eDP panel to quirk database add LG panel to dpcd quirk database 1 - - --- 2018-09-10 Lee Shawn C New
[3/5] drm/i915: Get proper min cdclk if vDSC enabled DSI driver improvement - 1 - --- 2021-09-01 Lee Shawn C New
[3/5] drm/i915/dsi: wait for header and payload credit available MIPI DSI driver enhancements - - - --- 2021-07-19 Lee Shawn C New
[4/5] drm/i915/dsi: refine send MIPI DCS command sequence MIPI DSI driver enhancements - - - --- 2021-07-19 Lee Shawn C New
[4/5] drm/i915/dsi: Retrieve max brightness level from VBT DSI driver improvement - - - --- 2021-09-01 Lee Shawn C New
[5/5] drm/i915: Get proper min cdclk if vDSC enabled MIPI DSI driver enhancements - - - --- 2021-07-19 Lee Shawn C New
[5/5] drm/i915/dsi: Read/write proper brightness value via MIPI DCS command DSI driver improvement - - - --- 2021-09-01 Lee Shawn C New
[i-g-t] tests/kms_dp_dsc: Avoid SIGSEGV when release DRM connector. [i-g-t] tests/kms_dp_dsc: Avoid SIGSEGV when release DRM connector. - 1 1 --- 2021-05-31 Lee Shawn C New
[i-g-t] tests/kms_dp_dsc: Transmit correct DRM connector structure. [i-g-t] tests/kms_dp_dsc: Transmit correct DRM connector structure. - - 1 --- 2021-06-01 Lee Shawn C New
[v2,1/2] commit 'a7b4deeb02b9 ("drm/i915/cml: Add CML PCI IDS)' introduced new PCI ID that CML supp… [v2,1/2] commit 'a7b4deeb02b9 ("drm/i915/cml: Add CML PCI IDS)' introduced new PCI ID that CML supp… - - - --- 2019-10-25 Lee Shawn C New
[v2,1/2] drm/i915/backlight: setup and cache pwm alternate increment value - - - --- 2016-09-19 Lee Shawn C New
[v2,1/5] drm/i915/dsi: send correct gpio_number on gen11 platform MIPI DSI driver enhancements - - - --- 2021-07-22 Lee Shawn C New
[v2,1/5] drm/i915/dsi: send correct gpio_number on gen11 platform MIPI DSI driver enhancements - - - --- 2021-07-22 Lee Shawn C New
[v2,1/5] drm/i915/dsi: wait for header and payload credit available DSI driver improvement - 1 - --- 2021-09-02 Lee Shawn C New
[v2,2/2] drm/i915/cml: Separate U sereis pci id from origianl list. [v2,1/2] commit 'a7b4deeb02b9 ("drm/i915/cml: Add CML PCI IDS)' introduced new PCI ID that CML supp… - - - --- 2019-10-25 Lee Shawn C New
[v2,2/5] drm/i915/dsi: refine send MIPI DCS command sequence DSI driver improvement - 1 - --- 2021-09-02 Lee Shawn C New
[v2,2/5] drm/i915/jsl: program DSI panel GPIOs MIPI DSI driver enhancements - - - --- 2021-07-22 Lee Shawn C New
[v2,2/5] drm/i915/jsl: program DSI panel GPIOs MIPI DSI driver enhancements - - - --- 2021-07-22 Lee Shawn C New
[v2,3/5] drm/i915: Get proper min cdclk if vDSC enabled DSI driver improvement - 1 - --- 2021-09-02 Lee Shawn C New
[v2,3/5] drm/i915/dsi: wait for header and payload credit available MIPI DSI driver enhancements - - - --- 2021-07-22 Lee Shawn C New
[v2,3/5] drm/i915/dsi: wait for header and payload credit available MIPI DSI driver enhancements - - - --- 2021-07-22 Lee Shawn C New
[v2,4/5] drm/i915/dsi: refine send MIPI DCS command sequence MIPI DSI driver enhancements - - - --- 2021-07-22 Lee Shawn C New
[v2,4/5] drm/i915/dsi: refine send MIPI DCS command sequence MIPI DSI driver enhancements - - - --- 2021-07-22 Lee Shawn C New
[v2,4/5] drm/i915/dsi: Retrieve max brightness level from VBT DSI driver improvement - - - --- 2021-09-02 Lee Shawn C New
[v2,5/5] drm/i915: Get proper min cdclk if vDSC enabled MIPI DSI driver enhancements - - - --- 2021-07-22 Lee Shawn C New
[v2,5/5] drm/i915: Get proper min cdclk if vDSC enabled MIPI DSI driver enhancements - - - --- 2021-07-22 Lee Shawn C New
[v2,5/5] drm/i915/dsi: Read/write proper brightness value via MIPI DCS command DSI driver improvement - 1 - --- 2021-09-02 Lee Shawn C New
[v2] drm: add LG eDP panel to quirk database [v2] drm: add LG eDP panel to quirk database - - - --- 2018-09-07 Lee Shawn C New
[v2] drm/edid: check basic audio support on CEA extension block [v2] drm/edid: check basic audio support on CEA extension block - 1 - --- 2022-03-23 Lee Shawn C New
[v2] drm/i915 : Restore PWM_GRANULARITY after resume - 3 - --- 2016-09-19 Lee Shawn C New
[v2] drm/i915: Check backlight type while doing eDP backlight initializaiton [v2] drm/i915: Check backlight type while doing eDP backlight initializaiton - - - --- 2019-06-19 Lee Shawn C New
[v2] drm/i915: Check require bandwidth did not exceed LSPCON limitation [v2] drm/i915: Check require bandwidth did not exceed LSPCON limitation - - - --- 2020-01-21 Lee Shawn C New
[v2] drm/i915: customize DPCD brightness control for specific panel [v2] drm/i915: customize DPCD brightness control for specific panel - - - --- 2019-10-09 Lee Shawn C New
[v2] drm/i915: Fix cursor coordinates on bigjoiner slave [v2] drm/i915: Fix cursor coordinates on bigjoiner slave - - 1 --- 2022-02-23 Lee Shawn C New
[v2] drm/i915: Refine eDP aux backlight enable/disable sequence [v2] drm/i915: Refine eDP aux backlight enable/disable sequence - - - --- 2019-06-25 Lee Shawn C New
[v2] drm/i915: Refine eDP aux backlight enable/disable sequence [v2] drm/i915: Refine eDP aux backlight enable/disable sequence - - - --- 2019-06-21 Lee Shawn C New
[v2] drm/i915: support two CSC module on gen11 and later [v2] drm/i915: support two CSC module on gen11 and later - - - --- 2021-01-15 Lee Shawn C New
[v2] drm/i915: update new TMDS clock setting defined by VBT [v2] drm/i915: update new TMDS clock setting defined by VBT - - - --- 2022-03-03 Lee Shawn C New
[v2] drm/i915: update rawclk also on resume [v2] drm/i915: update rawclk also on resume - - - --- 2019-11-01 Lee Shawn C New
[v2] drm/i915/bxt: Add MST support when do DPLL calculation - 5 - --- 2017-01-12 Lee Shawn C New
[v2] drm/i915/display: clear plane color ctl setting when turn full plane off [v2] drm/i915/display: clear plane color ctl setting when turn full plane off - 1 - --- 2022-07-22 Lee Shawn C New
[v2] drm/i915/dp: Read link status more times when EQ not done - - - --- 2017-03-02 Lee Shawn C New
[v2] drm/i915/dp/mst : Get clock rate from sink's available PBN [v2] drm/i915/dp/mst : Get clock rate from sink's available PBN - - - --- 2020-02-05 Lee Shawn C New
[v2] drm/i915/dsi: Send proper brightness value via MIPI DCS command [v2] drm/i915/dsi: Send proper brightness value via MIPI DCS command - - - --- 2021-07-26 Lee Shawn C New
[v2] drm/i915/edp: Read link status after exit link training - - - --- 2017-04-28 Lee Shawn C New
[v2] drm/i915/fbc: disable FBC on Nightfury board [v2] drm/i915/fbc: disable FBC on Nightfury board - - - --- 2020-09-11 Lee Shawn C New
[v2] drm/i915/fbc: Disable fbc with VT-d also with cometlake [v2] drm/i915/fbc: Disable fbc with VT-d also with cometlake - - - --- 2020-08-26 Lee Shawn C New
[v2] drm/i915/lspcon: enter standby mode to enhance power saving [v2] drm/i915/lspcon: enter standby mode to enhance power saving - - - --- 2020-11-18 Lee Shawn C New
[v2] drm/i915/lspcon: Make sure link rate did not exceed downstream and lspcon limitation [v2] drm/i915/lspcon: Make sure link rate did not exceed downstream and lspcon limitation - - - --- 2020-02-21 Lee Shawn C New
[v2] drm/i915/mst: filter out the display mode exceed sink's capability [v2] drm/i915/mst: filter out the display mode exceed sink's capability - - - --- 2020-05-11 Lee Shawn C New
[v2] drm/i915/mtl: Add new vswing table for C20 phy to support DP 1.4 [v2] drm/i915/mtl: Add new vswing table for C20 phy to support DP 1.4 - 2 - --- 2023-06-08 Lee Shawn C New
[v2] drm/i915/pps: improve eDP power on flow [v2] drm/i915/pps: improve eDP power on flow - - - --- 2022-10-24 Lee Shawn C New
[v2] drm/i915/rkl: new rkl ddc map for different PCH [v2] drm/i915/rkl: new rkl ddc map for different PCH - - - --- 2020-10-30 Lee Shawn C New
[v2] drm/i915/vbt: update DP max link rate table [v2] drm/i915/vbt: update DP max link rate table - - - --- 2021-02-17 Lee Shawn C New
[v3,1/5] drm/i915/dsi: wait for header and payload credit available DSI driver improvement - 1 - --- 2021-09-02 Lee Shawn C New
[V3,1/7] drm/i915/dsi: send correct gpio_number on gen11 platform MIPI DSI driver enhancements - - - --- 2021-07-23 Lee Shawn C New
[v3,2/5] drm/i915/dsi: refine send MIPI DCS command sequence DSI driver improvement - 1 - --- 2021-09-02 Lee Shawn C New
[V3,2/7] drm/i915/jsl: program DSI panel GPIOs MIPI DSI driver enhancements - - - --- 2021-07-23 Lee Shawn C New
[v3,3/5] drm/i915: Get proper min cdclk if vDSC enabled DSI driver improvement 1 1 - --- 2021-09-02 Lee Shawn C New
[V3,3/7] drm/i915/dsi: wait for header and payload credit available MIPI DSI driver enhancements - - - --- 2021-07-23 Lee Shawn C New
[v3,4/5] drm/i915/dsi: Retrieve max brightness level from VBT DSI driver improvement - 1 - --- 2021-09-02 Lee Shawn C New
[V3,4/7] drm/i915/dsi: refine send MIPI DCS command sequence MIPI DSI driver enhancements - - - --- 2021-07-23 Lee Shawn C New
[v3,5/5] drm/i915/dsi: Read/write proper brightness value via MIPI DCS command DSI driver improvement - 1 - --- 2021-09-02 Lee Shawn C New
[V3,5/7] drm/i915: Get proper min cdclk if vDSC enabled MIPI DSI driver enhancements - 1 - --- 2021-07-23 Lee Shawn C New
[V3,6/7] drm/i915/dsi: Retrieve max brightness level from VBT. MIPI DSI driver enhancements - - - --- 2021-07-23 Lee Shawn C New
[V3,7/7] drm/i915/dsi: Send proper brightness value via MIPI DCS command MIPI DSI driver enhancements - - - --- 2021-07-23 Lee Shawn C New
[v3] drm/edid: check basic audio support on CEA extension block [v3] drm/edid: check basic audio support on CEA extension block - 1 - --- 2022-03-24 Lee Shawn C New
[v3] drm/edid: check basic audio support on CEA extension block [v3] drm/edid: check basic audio support on CEA extension block - 1 - --- 2022-03-24 Lee Shawn C New
[v3] drm/i915: Check backlight type while doing eDP backlight initializaiton [v3] drm/i915: Check backlight type while doing eDP backlight initializaiton - 1 - --- 2019-06-20 Lee Shawn C New
[v3] drm/i915: Check require bandwidth did not exceed LSPCON limitation [v3] drm/i915: Check require bandwidth did not exceed LSPCON limitation - - - --- 2020-01-21 Lee Shawn C New
[v3] drm/i915: keep backlight_enable on until turn eDP display off [v3] drm/i915: keep backlight_enable on until turn eDP display off - - - --- 2021-06-22 Lee Shawn C New
[v3] drm/i915: support two CSC module on gen11 and later [v3] drm/i915: support two CSC module on gen11 and later - - - --- 2021-01-18 Lee Shawn C New
[v3] drm/i915: update rawclk also on resume [v3] drm/i915: update rawclk also on resume - - - --- 2019-11-01 Lee Shawn C New
[v3] drm/i915/bxt: Add MST support when do DPLL calculation - 6 - --- 2017-02-03 Lee Shawn C New
[v3] drm/i915/dp: Read link status more times when EQ not done - - - --- 2017-03-13 Lee Shawn C New
[v3] drm/i915/edp: Read link status after exit link training - - - --- 2017-05-05 Lee Shawn C New
[v3] drm/i915/lspcon: enter standby mode to enhance power saving [v3] drm/i915/lspcon: enter standby mode to enhance power saving - - - --- 2020-11-18 Lee Shawn C New
[v3] drm/i915/mst: filter out the display mode exceed sink's capability [v3] drm/i915/mst: filter out the display mode exceed sink's capability - - - --- 2020-05-19 Lee Shawn C New
[v3] drm/i915/mtl: Add new vswing table for C20 phy to support DP 1.4 [v3] drm/i915/mtl: Add new vswing table for C20 phy to support DP 1.4 - 2 - --- 2023-06-08 Lee Shawn C New
[v3] drm/i915/pps: improve eDP power on flow [v3] drm/i915/pps: improve eDP power on flow - - - --- 2022-11-03 Lee Shawn C New
[v3] drm/i915/rkl: new rkl ddc map for different PCH [v3] drm/i915/rkl: new rkl ddc map for different PCH - - - --- 2020-11-02 Lee Shawn C New
[v3] drm/i915/vbt: update DP max link rate table [v3] drm/i915/vbt: update DP max link rate table - 1 - --- 2021-02-17 Lee Shawn C New
[v4,1/3] drm: Add support for device_id based detection. add LG panel to dpcd quirk database - - - --- 2018-09-12 Lee Shawn C New
[v4,1/5] drm/i915/dsi: wait for header and payload credit available DSI driver improvement - 1 - --- 2021-09-08 Lee Shawn C New
[v4,1/7] drm/i915/dsi: send correct gpio_number on gen11 platform MIPI DSI driver enhancements - - - --- 2021-08-12 Lee Shawn C New
[v4,2/3] drm: Change limited M/N quirk to constant N quirk. add LG panel to dpcd quirk database - - - --- 2018-09-12 Lee Shawn C New
[v4,2/5] drm/i915/dsi: refine send MIPI DCS command sequence DSI driver improvement - 1 - --- 2021-09-08 Lee Shawn C New
« 1 2 3 »