diff mbox

[3/5] drm/i915: Add support for DRRS to switch RR

Message ID 1387441863-21953-4-git-send-email-vandana.kannan@intel.com (mailing list archive)
State New, archived
Headers show

Commit Message

vandana.kannan@intel.com Dec. 19, 2013, 8:31 a.m. UTC
From: Pradeep Bhat <pradeep.bhat@intel.com>

This patch computes and stored 2nd M/N/TU for switching to different
refresh rate dynamically. PIPECONF_EDP_RR_MODE_SWITCH bit helps toggle
between alternate refresh rates programmed in 2nd M/N/TU registers.

v2: Daniel's review comments
Computing M2/N2 in compute_config and storing it in crtc_config

v3: Modified reference to edp_downclock and edp_downclock_avail based on the
changes made to move them from dev_private to intel_panel.

Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com>
Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_reg.h  |    1 +
 drivers/gpu/drm/i915/intel_dp.c  |  108 ++++++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_drv.h |    6 ++-
 3 files changed, 114 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 3be449d..a52c663 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3203,6 +3203,7 @@ 
 #define   PIPECONF_INTERLACED_DBL_ILK		(4 << 21) /* ilk/snb only */
 #define   PIPECONF_PFIT_PF_INTERLACED_DBL_ILK	(5 << 21) /* ilk/snb only */
 #define   PIPECONF_INTERLACE_MODE_MASK		(7 << 21)
+#define   PIPECONF_EDP_RR_MODE_SWITCH		(1 << 20)
 #define   PIPECONF_CXSR_DOWNCLOCK	(1<<16)
 #define   PIPECONF_COLOR_RANGE_SELECT	(1 << 13)
 #define   PIPECONF_BPC_MASK	(0x7 << 5)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 67674ee..e110f26 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -791,6 +791,22 @@  intel_dp_set_clock(struct intel_encoder *encoder,
 	}
 }
 
+static void
+intel_dp_set_m2_n2(struct intel_crtc *crtc, struct intel_link_m_n *m_n)
+{
+	struct drm_device *dev = crtc->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	enum transcoder transcoder = crtc->config.cpu_transcoder;
+
+	I915_WRITE(PIPE_DATA_M2(transcoder),
+		   TU_SIZE(m_n->tu) | m_n->gmch_m);
+	I915_WRITE(PIPE_DATA_N2(transcoder), m_n->gmch_n);
+	I915_WRITE(PIPE_LINK_M2(transcoder), m_n->link_m);
+	I915_WRITE(PIPE_LINK_N2(transcoder), m_n->link_n);
+
+	return;
+}
+
 bool
 intel_dp_compute_config(struct intel_encoder *encoder,
 			struct intel_crtc_config *pipe_config)
@@ -894,6 +910,14 @@  found:
 			       pipe_config->port_clock,
 			       &pipe_config->dp_m_n);
 
+	if (intel_connector->panel.edp_downclock_avail &&
+	intel_dp->drrs_state.is_drrs_supported == SEAMLESS_DRRS_SUPPORT) {
+		intel_link_compute_m_n(bpp, lane_count,
+				intel_connector->panel.edp_downclock,
+				pipe_config->port_clock,
+				&pipe_config->dp_m2_n2);
+	}
+
 	intel_dp_set_clock(encoder, pipe_config, intel_dp->link_bw);
 
 	return true;
@@ -3524,6 +3548,88 @@  intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
 		      I915_READ(pp_div_reg));
 }
 
+void
+intel_dp_set_drrs_state(struct drm_device *dev, int refresh_rate)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct intel_encoder *encoder;
+	struct intel_dp *intel_dp = NULL;
+	struct intel_crtc_config *config = NULL;
+	struct intel_crtc *intel_crtc = NULL;
+	struct intel_connector *intel_connector = NULL;
+	bool found_edp = false;
+	u32 reg, val;
+	int index = 0;
+
+	if (refresh_rate <= 0) {
+		DRM_INFO("Refresh rate should be positive non-zero.\n");
+		goto out;
+	}
+
+	list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
+		if (encoder->type == INTEL_OUTPUT_EDP) {
+			intel_dp = enc_to_intel_dp(&encoder->base);
+			intel_crtc = encoder->new_crtc;
+			if (!intel_crtc) {
+			DRM_INFO("DRRS: intel_crtc not initialized\n");
+				goto out;
+			}
+			config = &intel_crtc->config;
+			intel_connector = intel_dp->attached_connector;
+			found_edp = true;
+			break;
+		}
+	}
+
+	if (!found_edp) {
+		DRM_INFO("DRRS supported for eDP only.\n");
+		goto out;
+	}
+
+	if (intel_dp->drrs_state.is_drrs_supported < SEAMLESS_DRRS_SUPPORT) {
+		DRM_INFO("Seamless DRRS not supported.\n");
+		goto out;
+	}
+
+	if (intel_connector->panel.fixed_mode->vrefresh == refresh_rate)
+		index = DRRS_HIGH_RR;
+	else
+		index = DRRS_LOW_RR;
+
+	if (index == intel_dp->drrs_state.drrs_refresh_rate_type) {
+		DRM_INFO("DRRS requested for previously set RR...ignoring\n");
+		goto out;
+	}
+
+	if (!intel_crtc->active) {
+		DRM_INFO("eDP encoder has been disabled. CRTC not Active\n");
+		goto out;
+	}
+
+	mutex_lock(&intel_dp->drrs_state.mutex);
+
+	/* Haswell and below */
+	if (INTEL_INFO(dev)->gen >= 5 && INTEL_INFO(dev)->gen < 8) {
+		reg = PIPECONF(intel_crtc->config.cpu_transcoder);
+		val = I915_READ(reg);
+		if (index > DRRS_HIGH_RR) {
+			val |= PIPECONF_EDP_RR_MODE_SWITCH;
+			intel_dp_set_m2_n2(intel_crtc, &config->dp_m2_n2);
+		} else
+			val &= ~PIPECONF_EDP_RR_MODE_SWITCH;
+		I915_WRITE(reg, val);
+	}
+
+	intel_dp->drrs_state.drrs_refresh_rate_type = index;
+	DRM_INFO("eDP Refresh Rate set to : %dHz\n", refresh_rate);
+
+	mutex_unlock(&intel_dp->drrs_state.mutex);
+
+out:
+	return;
+}
+
 static void
 intel_dp_drrs_initialize(struct intel_digital_port *intel_dig_port,
 			struct intel_connector *intel_connector,
@@ -3558,6 +3664,8 @@  intel_dp_drrs_initialize(struct intel_digital_port *intel_dig_port,
 		intel_connector->panel.edp_downclock =
 			intel_connector->panel.downclock_mode->clock;
 
+		mutex_init(&intel_dp->drrs_state.mutex);
+
 		intel_dp->drrs_state.is_drrs_supported
 				= dev_priv->vbt.drrs_mode;
 
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index aa79adc..863fa60 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -291,6 +291,9 @@  struct intel_crtc_config {
 	int pipe_bpp;
 	struct intel_link_m_n dp_m_n;
 
+	/* m2_n2 for eDP downclock */
+	struct intel_link_m_n dp_m2_n2;
+
 	/*
 	 * Frequence the dpll for the port should run at. Differs from the
 	 * adjusted dotclock e.g. for DP or 12bpc hdmi mode. This is also
@@ -491,6 +494,7 @@  enum edp_drrs_refresh_rate_type {
 struct drrs_info {
 	int is_drrs_supported;
 	int drrs_refresh_rate_type;
+	struct mutex mutex;
 };
 
 struct intel_dp {
@@ -763,7 +767,7 @@  void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync);
 void intel_edp_psr_enable(struct intel_dp *intel_dp);
 void intel_edp_psr_disable(struct intel_dp *intel_dp);
 void intel_edp_psr_update(struct drm_device *dev);
-
+extern void intel_dp_set_drrs_state(struct drm_device *dev, int refresh_rate);
 
 /* intel_dsi.c */
 bool intel_dsi_init(struct drm_device *dev);