diff mbox

3.6-rc1 breaks my laptop graphics (intel)

Message ID 20120812182157.GA1949@kroah.com (mailing list archive)
State New, archived
Headers show

Commit Message

Greg Kroah-Hartman Aug. 12, 2012, 6:21 p.m. UTC
Hi Daniel.

The 3.6-rc1 kernel breaks my laptop, booting to a black screen when the
i915 driver initializes itself.  I bisected this down to commit
24ded204429fa0f5501d37c63ee35c555c0b75ee (drm/i915: properly enable the
blc controller on the right pipe), and when I revert that, and also
a4f32fc3a37e982fffce8ec583643990ff288419 (drm/i915: don't forget the PCH
backlight registers) which depended on the first patch, my laptop works
just fine.

Below is the combined revert.

Any thoughts?  Any patch I can try out?

thanks,

greg k-h

------
Subject: drm/i915: revert 24ded204429fa0f5501d37c63ee35c555c0b75ee and a4f32fc3a37e982fffce8ec583643990ff288419

24ded204429fa0f5501d37c63ee35c555c0b75ee (drm/i915: properly enable the
blc controller on the right pipe) breaks the boot for my laptop, so
revert it, and a4f32fc3a37e982fffce8ec583643990ff288419 (drm/i915: don't
forget the PCH backlight registers) which depended on it.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Comments

Daniel Vetter Aug. 12, 2012, 6:25 p.m. UTC | #1
On Sun, Aug 12, 2012 at 11:21:57AM -0700, Greg KH wrote:
> Hi Daniel.
> 
> The 3.6-rc1 kernel breaks my laptop, booting to a black screen when the
> i915 driver initializes itself.  I bisected this down to commit
> 24ded204429fa0f5501d37c63ee35c555c0b75ee (drm/i915: properly enable the
> blc controller on the right pipe), and when I revert that, and also
> a4f32fc3a37e982fffce8ec583643990ff288419 (drm/i915: don't forget the PCH
> backlight registers) which depended on the first patch, my laptop works
> just fine.
> 
> Below is the combined revert.
> 
> Any thoughts?  Any patch I can try out?

http://cgit.freedesktop.org/~danvet/drm-intel/commit/?h=drm-intel-fixes&id=770c12312ad617172b1a65b911d3e6564fc5aca8

which is already merged to drm-intel-fixes.

Thanks, Daniel
Greg Kroah-Hartman Aug. 12, 2012, 6:33 p.m. UTC | #2
On Sun, Aug 12, 2012 at 08:25:31PM +0200, Daniel Vetter wrote:
> On Sun, Aug 12, 2012 at 11:21:57AM -0700, Greg KH wrote:
> > Hi Daniel.
> > 
> > The 3.6-rc1 kernel breaks my laptop, booting to a black screen when the
> > i915 driver initializes itself.  I bisected this down to commit
> > 24ded204429fa0f5501d37c63ee35c555c0b75ee (drm/i915: properly enable the
> > blc controller on the right pipe), and when I revert that, and also
> > a4f32fc3a37e982fffce8ec583643990ff288419 (drm/i915: don't forget the PCH
> > backlight registers) which depended on the first patch, my laptop works
> > just fine.
> > 
> > Below is the combined revert.
> > 
> > Any thoughts?  Any patch I can try out?
> 
> http://cgit.freedesktop.org/~danvet/drm-intel/commit/?h=drm-intel-fixes&id=770c12312ad617172b1a65b911d3e6564fc5aca8
> 
> which is already merged to drm-intel-fixes.

Ah, thanks, I'll go try that out, the Subject: line didn't draw my
attention to it being the same problem as mine :)

greg k-h
Greg Kroah-Hartman Aug. 12, 2012, 6:48 p.m. UTC | #3
On Sun, Aug 12, 2012 at 11:33:05AM -0700, Greg KH wrote:
> On Sun, Aug 12, 2012 at 08:25:31PM +0200, Daniel Vetter wrote:
> > On Sun, Aug 12, 2012 at 11:21:57AM -0700, Greg KH wrote:
> > > Hi Daniel.
> > > 
> > > The 3.6-rc1 kernel breaks my laptop, booting to a black screen when the
> > > i915 driver initializes itself.  I bisected this down to commit
> > > 24ded204429fa0f5501d37c63ee35c555c0b75ee (drm/i915: properly enable the
> > > blc controller on the right pipe), and when I revert that, and also
> > > a4f32fc3a37e982fffce8ec583643990ff288419 (drm/i915: don't forget the PCH
> > > backlight registers) which depended on the first patch, my laptop works
> > > just fine.
> > > 
> > > Below is the combined revert.
> > > 
> > > Any thoughts?  Any patch I can try out?
> > 
> > http://cgit.freedesktop.org/~danvet/drm-intel/commit/?h=drm-intel-fixes&id=770c12312ad617172b1a65b911d3e6564fc5aca8
> > 
> > which is already merged to drm-intel-fixes.
> 
> Ah, thanks, I'll go try that out, the Subject: line didn't draw my
> attention to it being the same problem as mine :)

Yes, that works, many thanks.

I'm guessing this is going to be going to Linus soon, right?

greg k-h
Daniel Vetter Aug. 12, 2012, 7:05 p.m. UTC | #4
On Sun, Aug 12, 2012 at 11:48:02AM -0700, Greg KH wrote:
> On Sun, Aug 12, 2012 at 11:33:05AM -0700, Greg KH wrote:
> > On Sun, Aug 12, 2012 at 08:25:31PM +0200, Daniel Vetter wrote:
> > > On Sun, Aug 12, 2012 at 11:21:57AM -0700, Greg KH wrote:
> > > > Hi Daniel.
> > > > 
> > > > The 3.6-rc1 kernel breaks my laptop, booting to a black screen when the
> > > > i915 driver initializes itself.  I bisected this down to commit
> > > > 24ded204429fa0f5501d37c63ee35c555c0b75ee (drm/i915: properly enable the
> > > > blc controller on the right pipe), and when I revert that, and also
> > > > a4f32fc3a37e982fffce8ec583643990ff288419 (drm/i915: don't forget the PCH
> > > > backlight registers) which depended on the first patch, my laptop works
> > > > just fine.
> > > > 
> > > > Below is the combined revert.
> > > > 
> > > > Any thoughts?  Any patch I can try out?
> > > 
> > > http://cgit.freedesktop.org/~danvet/drm-intel/commit/?h=drm-intel-fixes&id=770c12312ad617172b1a65b911d3e6564fc5aca8
> > > 
> > > which is already merged to drm-intel-fixes.
> > 
> > Ah, thanks, I'll go try that out, the Subject: line didn't draw my
> > attention to it being the same problem as mine :)
> 
> Yes, that works, many thanks.
> 
> I'm guessing this is going to be going to Linus soon, right?

Yeah, I'm stalling a bit for test results on an edp regression fixer that
affects the new macbook air, but I'll send current -fixes to Dave in a few
days.

Thanks for reporting this regression,
Daniel
diff mbox

Patch

diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 8435355..4e786f2 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -383,8 +383,7 @@  extern u32 intel_panel_get_max_backlight(struct drm_device *dev);
 extern u32 intel_panel_get_backlight(struct drm_device *dev);
 extern void intel_panel_set_backlight(struct drm_device *dev, u32 level);
 extern int intel_panel_setup_backlight(struct drm_device *dev);
-extern void intel_panel_enable_backlight(struct drm_device *dev,
-					 enum pipe pipe);
+extern void intel_panel_enable_backlight(struct drm_device *dev);
 extern void intel_panel_disable_backlight(struct drm_device *dev);
 extern void intel_panel_destroy_backlight(struct drm_device *dev);
 extern enum drm_connector_status intel_panel_detect(struct drm_device *dev);
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index e05c0d3..6547904 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -71,7 +71,6 @@  static struct intel_lvds *intel_attached_lvds(struct drm_connector *connector)
 static void intel_lvds_enable(struct intel_lvds *intel_lvds)
 {
 	struct drm_device *dev = intel_lvds->base.base.dev;
-	struct intel_crtc *intel_crtc = to_intel_crtc(intel_lvds->base.base.crtc);
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 ctl_reg, lvds_reg, stat_reg;
 
@@ -108,7 +107,7 @@  static void intel_lvds_enable(struct intel_lvds *intel_lvds)
 	if (wait_for((I915_READ(stat_reg) & PP_ON) != 0, 1000))
 		DRM_ERROR("timed out waiting for panel to power on\n");
 
-	intel_panel_enable_backlight(dev, intel_crtc->pipe);
+	intel_panel_enable_backlight(dev);
 }
 
 static void intel_lvds_disable(struct intel_lvds *intel_lvds)
@@ -1079,14 +1078,35 @@  bool intel_lvds_init(struct drm_device *dev)
 		goto failed;
 
 out:
-	/*
-	 * Unlock registers and just
-	 * leave them unlocked
-	 */
 	if (HAS_PCH_SPLIT(dev)) {
+		u32 pwm;
+
+		pipe = (I915_READ(PCH_LVDS) & LVDS_PIPEB_SELECT) ? 1 : 0;
+
+		/* make sure PWM is enabled and locked to the LVDS pipe */
+		pwm = I915_READ(BLC_PWM_CPU_CTL2);
+		if (pipe == 0 && (pwm & BLM_PIPE_B))
+			I915_WRITE(BLC_PWM_CPU_CTL2, pwm & ~BLM_PWM_ENABLE);
+		if (pipe)
+			pwm |= BLM_PIPE_B;
+		else
+			pwm &= ~BLM_PIPE_B;
+		I915_WRITE(BLC_PWM_CPU_CTL2, pwm | BLM_PWM_ENABLE);
+
+		pwm = I915_READ(BLC_PWM_PCH_CTL1);
+		pwm |= BLM_PCH_PWM_ENABLE;
+		I915_WRITE(BLC_PWM_PCH_CTL1, pwm);
+		/*
+		 * Unlock registers and just
+		 * leave them unlocked
+		 */
 		I915_WRITE(PCH_PP_CONTROL,
 			   I915_READ(PCH_PP_CONTROL) | PANEL_UNLOCK_REGS);
 	} else {
+		/*
+		 * Unlock registers and just
+		 * leave them unlocked
+		 */
 		I915_WRITE(PP_CONTROL,
 			   I915_READ(PP_CONTROL) | PANEL_UNLOCK_REGS);
 	}
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index 10c7d39..7180cc8 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -287,24 +287,9 @@  void intel_panel_disable_backlight(struct drm_device *dev)
 
 	dev_priv->backlight_enabled = false;
 	intel_panel_actually_set_backlight(dev, 0);
-
-	if (INTEL_INFO(dev)->gen >= 4) {
-		uint32_t reg, tmp;
-
-		reg = HAS_PCH_SPLIT(dev) ? BLC_PWM_CPU_CTL2 : BLC_PWM_CTL2;
-
-		I915_WRITE(reg, I915_READ(reg) & ~BLM_PWM_ENABLE);
-
-		if (HAS_PCH_SPLIT(dev)) {
-			tmp = I915_READ(BLC_PWM_PCH_CTL1);
-			tmp &= ~BLM_PCH_PWM_ENABLE;
-			I915_WRITE(BLC_PWM_PCH_CTL1, tmp);
-		}
-	}
 }
 
-void intel_panel_enable_backlight(struct drm_device *dev,
-				  enum pipe pipe)
+void intel_panel_enable_backlight(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
@@ -313,40 +298,6 @@  void intel_panel_enable_backlight(struct drm_device *dev,
 
 	dev_priv->backlight_enabled = true;
 	intel_panel_actually_set_backlight(dev, dev_priv->backlight_level);
-
-	if (INTEL_INFO(dev)->gen >= 4) {
-		uint32_t reg, tmp;
-
-		reg = HAS_PCH_SPLIT(dev) ? BLC_PWM_CPU_CTL2 : BLC_PWM_CTL2;
-
-
-		tmp = I915_READ(reg);
-
-		/* Note that this can also get called through dpms changes. And
-		 * we don't track the backlight dpms state, hence check whether
-		 * we have to do anything first. */
-		if (tmp & BLM_PWM_ENABLE)
-			return;
-
-		if (dev_priv->num_pipe == 3)
-			tmp &= ~BLM_PIPE_SELECT_IVB;
-		else
-			tmp &= ~BLM_PIPE_SELECT;
-
-		tmp |= BLM_PIPE(pipe);
-		tmp &= ~BLM_PWM_ENABLE;
-
-		I915_WRITE(reg, tmp);
-		POSTING_READ(reg);
-		I915_WRITE(reg, tmp | BLM_PWM_ENABLE);
-
-		if (HAS_PCH_SPLIT(dev)) {
-			tmp = I915_READ(BLC_PWM_PCH_CTL1);
-			tmp |= BLM_PCH_PWM_ENABLE;
-			tmp &= ~BLM_PCH_OVERRIDE_ENABLE;
-			I915_WRITE(BLC_PWM_PCH_CTL1, tmp);
-		}
-	}
 }
 
 static void intel_panel_init_backlight(struct drm_device *dev)