@@ -389,6 +389,8 @@ intel_display_power_put_all_in_set(struct drm_i915_private *i915,
enum dbuf_slice {
DBUF_S1,
DBUF_S2,
+ DBUF_S3,
+ DBUF_S4,
I915_MAX_DBUF_SLICES
};
@@ -7288,7 +7288,7 @@ enum {
#define _PLANE_BUF_CFG_1_B 0x7127c
#define _PLANE_BUF_CFG_2_B 0x7137c
-#define DDB_ENTRY_MASK 0x7FF /* skl+: 10 bits, icl+ 11 bits */
+#define DDB_ENTRY_MASK 0xFFF /* skl+: 10 bits, icl+ 11 bits, adlp+ 12 bits */
#define DDB_ENTRY_END_SHIFT 16
#define _PLANE_BUF_CFG_1(pipe) \
_PIPE(pipe, _PLANE_BUF_CFG_1_A, _PLANE_BUF_CFG_1_B)
@@ -8115,9 +8115,23 @@ enum {
#define DISP_DATA_PARTITION_5_6 (1 << 6)
#define DISP_IPC_ENABLE (1 << 3)
-#define _DBUF_CTL_S1 0x45008
-#define _DBUF_CTL_S2 0x44FE8
-#define DBUF_CTL_S(slice) _MMIO(_PICK_EVEN(slice, _DBUF_CTL_S1, _DBUF_CTL_S2))
+/*
+ * The below are numbered starting from "S1" on gen11/gen12, but starting
+ * with gen13 display, the bspec switches to a 0-based numbering scheme
+ * (although the addresses stay the same so new S0 = old S1, new S1 = old S2).
+ * We'll just use the 0-based numbering here for all platforms since it's the
+ * way things will be named by the hardware team going forward, plus it's more
+ * consistent with how most of the rest of our registers are named.
+ */
+#define _DBUF_CTL_S0 0x45008
+#define _DBUF_CTL_S1 0x44FE8
+#define _DBUF_CTL_S2 0x44300
+#define _DBUF_CTL_S3 0x44304
+#define DBUF_CTL_S(slice) _MMIO(_PICK(slice, \
+ _DBUF_CTL_S0, \
+ _DBUF_CTL_S1, \
+ _DBUF_CTL_S2, \
+ _DBUF_CTL_S3))
#define DBUF_POWER_REQUEST REG_BIT(31)
#define DBUF_POWER_STATE REG_BIT(30)
#define DBUF_TRACKER_STATE_SERVICE_MASK REG_GENMASK(23, 19)
@@ -4561,6 +4561,118 @@ static const struct dbuf_slice_conf_entry tgl_allowed_dbufs[] =
{}
};
+static const struct dbuf_slice_conf_entry adlp_allowed_dbufs[] = {
+ {
+ .active_pipes = BIT(PIPE_A),
+ .dbuf_mask = {
+ [PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2),
+ },
+ },
+ {
+ .active_pipes = BIT(PIPE_B),
+ .dbuf_mask = {
+ [PIPE_B] = BIT(DBUF_S3) | BIT(DBUF_S4),
+ },
+ },
+ {
+ .active_pipes = BIT(PIPE_A) | BIT(PIPE_B),
+ .dbuf_mask = {
+ [PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2),
+ [PIPE_B] = BIT(DBUF_S3) | BIT(DBUF_S4),
+ },
+ },
+ {
+ .active_pipes = BIT(PIPE_C),
+ .dbuf_mask = {
+ [PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4),
+ },
+ },
+ {
+ .active_pipes = BIT(PIPE_A) | BIT(PIPE_C),
+ .dbuf_mask = {
+ [PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2),
+ [PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4),
+ },
+ },
+ {
+ .active_pipes = BIT(PIPE_B) | BIT(PIPE_C),
+ .dbuf_mask = {
+ [PIPE_B] = BIT(DBUF_S3) | BIT(DBUF_S4),
+ [PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4),
+ },
+ },
+ {
+ .active_pipes = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_C),
+ .dbuf_mask = {
+ [PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2),
+ [PIPE_B] = BIT(DBUF_S3) | BIT(DBUF_S4),
+ [PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4),
+ },
+ },
+ {
+ .active_pipes = BIT(PIPE_D),
+ .dbuf_mask = {
+ [PIPE_D] = BIT(DBUF_S1) | BIT(DBUF_S2),
+ },
+ },
+ {
+ .active_pipes = BIT(PIPE_A) | BIT(PIPE_D),
+ .dbuf_mask = {
+ [PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2),
+ [PIPE_D] = BIT(DBUF_S1) | BIT(DBUF_S2),
+ },
+ },
+ {
+ .active_pipes = BIT(PIPE_B) | BIT(PIPE_D),
+ .dbuf_mask = {
+ [PIPE_B] = BIT(DBUF_S3) | BIT(DBUF_S4),
+ [PIPE_D] = BIT(DBUF_S1) | BIT(DBUF_S2),
+ },
+ },
+ {
+ .active_pipes = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_D),
+ .dbuf_mask = {
+ [PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2),
+ [PIPE_B] = BIT(DBUF_S3) | BIT(DBUF_S4),
+ [PIPE_D] = BIT(DBUF_S1) | BIT(DBUF_S2),
+ },
+ },
+ {
+ .active_pipes = BIT(PIPE_C) | BIT(PIPE_D),
+ .dbuf_mask = {
+ [PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4),
+ [PIPE_D] = BIT(DBUF_S1) | BIT(DBUF_S2),
+ },
+ },
+ {
+ .active_pipes = BIT(PIPE_A) | BIT(PIPE_C) | BIT(PIPE_D),
+ .dbuf_mask = {
+ [PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2),
+ [PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4),
+ [PIPE_D] = BIT(DBUF_S1) | BIT(DBUF_S2),
+ },
+ },
+ {
+ .active_pipes = BIT(PIPE_B) | BIT(PIPE_C) | BIT(PIPE_D),
+ .dbuf_mask = {
+ [PIPE_B] = BIT(DBUF_S3) | BIT(DBUF_S4),
+ [PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4),
+ [PIPE_D] = BIT(DBUF_S1) | BIT(DBUF_S2),
+ },
+ },
+ {
+ .active_pipes = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_C) | BIT(PIPE_D),
+ .dbuf_mask = {
+ [PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2),
+ [PIPE_B] = BIT(DBUF_S3) | BIT(DBUF_S4),
+ [PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4),
+ [PIPE_D] = BIT(DBUF_S1) | BIT(DBUF_S2),
+ },
+ },
+ {}
+
+};
+
static u8 compute_dbuf_slices(enum pipe pipe, u8 active_pipes,
const struct dbuf_slice_conf_entry *dbuf_slices)
{
@@ -4600,12 +4712,19 @@ static u8 tgl_compute_dbuf_slices(enum pipe pipe, u8 active_pipes)
return compute_dbuf_slices(pipe, active_pipes, tgl_allowed_dbufs);
}
+static u32 adlp_compute_dbuf_slices(enum pipe pipe, u32 active_pipes)
+{
+ return compute_dbuf_slices(pipe, active_pipes, adlp_allowed_dbufs);
+}
+
static u8 skl_compute_dbuf_slices(struct intel_crtc *crtc, u8 active_pipes)
{
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
enum pipe pipe = crtc->pipe;
- if (DISPLAY_VER(dev_priv) == 12)
+ if (IS_ALDERLAKE_P(dev_priv))
+ return adlp_compute_dbuf_slices(pipe, active_pipes);
+ else if (DISPLAY_VER(dev_priv) == 12)
return tgl_compute_dbuf_slices(pipe, active_pipes);
else if (DISPLAY_VER(dev_priv) == 11)
return icl_compute_dbuf_slices(pipe, active_pipes);