diff mbox series

[41/56] drm/i915/adl_p: Tx escape clock with DSI

Message ID 20210311223632.3191939-42-matthew.d.roper@intel.com (mailing list archive)
State New, archived
Headers show
Series Introduce Alder Lake-P | expand

Commit Message

Matt Roper March 11, 2021, 10:36 p.m. UTC
From: Mika Kahola <mika.kahola@intel.com>

Today when the DSI controller is paired with the Combo-PHY it
uses the high-speed (HS) Word clock for its low power (LP)
transmit PPI communication to the DPHY. The interface signaling
only changes state at an Escape clock frequency (i.e. its
effectively running on a virtual Tx Escape clock that is controlled
by counters w/in the controller), but all the interface flops are
running off the HS clock.

This has the following drawbacks:

 * It is a deviation from the PPI spec which assumes signaling is
   running on a physical Escape clock
 * The PV timings are over constrained (HS timed to 312.5MHz vs.
   an Escape clock of 20MHz max)

This feature is proposing to change the LP Tx communication between
the controller and the DPHY from a virtual Tx Escape clock to a physical
clock.

To do this we need to program two "M" divisors. One for the usual
DSI_ESC_CLK_DIV and DPHY_ESC_CLK_DIV register and one for MIPIO_DWORD8.

For DSI_ESC_CLK_DIV and DPHY_ESC_CLK_DIV registers the "M" is calculated
as following

Nt = ceil(f_link/160) (theoretical word clock)
Nact = max[3, Nt + (Nt + 1)%2] (actual word clock)
M = Nact * 8

For MIPIO_DWORD8 register, the divisor "M" is calculated as following

M = (Nact - 1)/2

BSpec: 55171

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
---
 drivers/gpu/drm/i915/display/icl_dsi.c | 21 +++++++++++++++++++--
 drivers/gpu/drm/i915/i915_reg.h        |  6 ++++++
 2 files changed, 25 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
index 37e2d93d064c..957bef1f8dba 100644
--- a/drivers/gpu/drm/i915/display/icl_dsi.c
+++ b/drivers/gpu/drm/i915/display/icl_dsi.c
@@ -361,10 +361,19 @@  static void gen11_dsi_program_esc_clk_div(struct intel_encoder *encoder,
 	struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
 	enum port port;
 	int afe_clk_khz;
-	u32 esc_clk_div_m;
+	int theo_word_clk, act_word_clk;
+	u32 esc_clk_div_m, esc_clk_div_m_phy;
 
 	afe_clk_khz = afe_clk(encoder, crtc_state);
-	esc_clk_div_m = DIV_ROUND_UP(afe_clk_khz, DSI_MAX_ESC_CLK);
+
+	if (IS_ALDERLAKE_S(dev_priv) || IS_ALDERLAKE_P(dev_priv)) {
+		theo_word_clk = DIV_ROUND_UP(afe_clk_khz, 8 * DSI_MAX_ESC_CLK);
+		act_word_clk = max(3, theo_word_clk + (theo_word_clk + 1) % 2);
+		esc_clk_div_m = act_word_clk * 8;
+		esc_clk_div_m_phy = (act_word_clk - 1)/2;
+	} else {
+		esc_clk_div_m = DIV_ROUND_UP(afe_clk_khz, DSI_MAX_ESC_CLK);
+	}
 
 	for_each_dsi_port(port, intel_dsi->ports) {
 		intel_de_write(dev_priv, ICL_DSI_ESC_CLK_DIV(port),
@@ -377,6 +386,14 @@  static void gen11_dsi_program_esc_clk_div(struct intel_encoder *encoder,
 			       esc_clk_div_m & ICL_ESC_CLK_DIV_MASK);
 		intel_de_posting_read(dev_priv, ICL_DPHY_ESC_CLK_DIV(port));
 	}
+
+	if (IS_ALDERLAKE_S(dev_priv) || IS_ALDERLAKE_P(dev_priv)) {
+		for_each_dsi_port(port, intel_dsi->ports) {
+			intel_de_write(dev_priv, ADL_MIPIO_DW(port, 8),
+				       esc_clk_div_m_phy & TX_ESC_CLK_DIV_PHY);
+			intel_de_posting_read(dev_priv, ADL_MIPIO_DW(port, 8));
+		}
+	}
 }
 
 static void get_dsi_io_power_domains(struct drm_i915_private *dev_priv,
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index a447f3882bd7..0adde69a60f4 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -11305,6 +11305,12 @@  enum skl_power_gate {
 #define  ICL_ESC_CLK_DIV_SHIFT			0
 #define DSI_MAX_ESC_CLK			20000		/* in KHz */
 
+#define _ADL_MIPIO_REG			0x180
+#define ADL_MIPIO_DW(port, dw)		_MMIO(_ICL_COMBOPHY(port) + _ADL_MIPIO_REG + 4 * (dw))
+#define   TX_ESC_CLK_DIV_PHY_SEL	REGBIT(16)
+#define   TX_ESC_CLK_DIV_PHY_MASK	REG_GENMASK(23, 16)
+#define   TX_ESC_CLK_DIV_PHY		REG_FIELD_PREP(TX_ESC_CLK_DIV_PHY_MASK, 0x7f)
+
 #define _DSI_CMD_FRMCTL_0		0x6b034
 #define _DSI_CMD_FRMCTL_1		0x6b834
 #define DSI_CMD_FRMCTL(port)		_MMIO_PORT(port,	\