diff mbox series

[vfio,3/5] vfio/mlx5: Handle the EREMOTEIO error upon the SAVE command

Message ID 20240130170227.153464-4-yishaih@nvidia.com (mailing list archive)
State New, archived
Headers show
Series Improve mlx5 driver to better handle some error cases | expand

Commit Message

Yishai Hadas Jan. 30, 2024, 5:02 p.m. UTC 
The SAVE command uses the async command interface over the PF.

Upon a failure in the firmware -EREMOTEIO is returned.

In that case call mlx5_cmd_out_err() to let it print the command failure
details including the firmware syndrome.

Note:
The other commands in the driver use the sync command interface in a way
that a firmware syndrome is printed upon an error inside mlx5_core.

Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
---
 drivers/vfio/pci/mlx5/cmd.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/vfio/pci/mlx5/cmd.c b/drivers/vfio/pci/mlx5/cmd.c
index 55ba02c70093..bed1ba9f1bf5 100644
--- a/drivers/vfio/pci/mlx5/cmd.c
+++ b/drivers/vfio/pci/mlx5/cmd.c
@@ -614,8 +614,13 @@  static void mlx5vf_save_callback(int status, struct mlx5_async_work *context)
 
 err:
 	/* The error flow can't run from an interrupt context */
-	if (status == -EREMOTEIO)
+	if (status == -EREMOTEIO) {
 		status = MLX5_GET(save_vhca_state_out, async_data->out, status);
+		/* Failed in FW, print cmd out failure details */
+		mlx5_cmd_out_err(migf->mvdev->mdev, MLX5_CMD_OP_SAVE_VHCA_STATE, 0,
+				 async_data->out);
+	}
+
 	async_data->status = status;
 	queue_work(migf->mvdev->cb_wq, &async_data->work);
 }