Show patches with: Submitter = Anand Moon       |    Archived = No       |   117 patches
« 1 2 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v5,2/2] arm64: dts: amlogic: Used onboard usb hub reset on odroid n2 Use onboard usb hub reset on Odroid N2 - - - --- 2023-11-30 Anand Moon Superseded
[v5,1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub Use onboard usb hub reset on Odroid N2 - 1 - --- 2023-11-30 Anand Moon Superseded
[v4,2/2] arm64: dts: amlogic: Used onboard usb hub reset on odroid n2 Use onboard usb hub reset on Odroid N2 - - - --- 2023-11-22 Anand Moon Superseded
[v4,1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub Use onboard usb hub reset on Odroid N2 - - - --- 2023-11-22 Anand Moon Superseded
[RESEND,linux-next,v4.1,4/4] dt-bindings: usb: Fix properties for VL817 hub controller Used onboard HUB to reset and add power to hub - 1 - --- 2023-01-25 Anand Moon Superseded
[RESEND,linux-next,v4.1,3/4] arm64: dts: meson: move usb-hub node under dwc3 node on Odroid C4 Used onboard HUB to reset and add power to hub - - - --- 2023-01-25 Anand Moon Superseded
[RESEND,linux-next,v4.1,2/4] arm64: dts: amlogic: Drop superfluous dr_mode in usb node on odroid c2 Used onboard HUB to reset and add power to hub - - - --- 2023-01-25 Anand Moon Superseded
[RESEND,linux-next,v4.1,1/4] ARM: dts: amlogic: Drop superfluous dr_mode in usb node on odroid C1 Used onboard HUB to reset and add power to hub - - - --- 2023-01-25 Anand Moon Superseded
[RESEND,linux-next,v4,4/4] dt-bindings: usb: Fix properties for VL817 hub controller Used onboard HUB to reset and add power to hub - 1 - --- 2023-01-25 Anand Moon Superseded
[RESEND,linux-next,v4,3/4] arm64: dts: meson: move usb-hub node under dwc3 node on Odroid C4 Used onboard HUB to reset and add power to hub - - - --- 2023-01-25 Anand Moon Superseded
[RESEND,linux-next,v4,2/4] arm64: dts: amlogic: Drop superfluous dr_mode in usb node on odroid c2 Used onboard HUB to reset and add power to hub - - - --- 2023-01-25 Anand Moon Superseded
[RESEND,linux-next,v4,1/4] ARM: dts: amlogic: Drop superfluous dr_mode in usb node on odroid C1 Used onboard HUB to reset and add power to hub - - - --- 2023-01-25 Anand Moon Superseded
[linux-next,v4,4/4] dt-bindings: usb: Fix device tree binding for VL817 hub controller Used onboard HUB to reset and add power to hub - 1 - --- 2023-01-24 Anand Moon Superseded
[linux-next,v4,3/4] arm64: dts: meson: move usb-hub node under dwc3 node on Odroid C4 Used onboard HUB to reset and add power to hub - - - --- 2023-01-24 Anand Moon Superseded
[linux-next,v4,2/4] arm64: dts: amlogic: Drop superfluous dr_mode in usb node on odroid c2 Used onboard HUB to reset and add power to hub - - - --- 2023-01-24 Anand Moon Superseded
[linux-next,v4,1/4] ARM: dts: amlogic: Drop superfluous dr_mode in usb node on odroid C1 Used onboard HUB to reset and add power to hub - - - --- 2023-01-24 Anand Moon Superseded
[v3,9/9] arm64: defconfig: Enable USB onboard HUB driver Used onboard HUB to reset and add power to hub - 1 - --- 2023-01-21 Anand Moon Superseded
[v3,8/9] usb: misc: onboard_usb_hub: add VIA LAB VL817 hub support Used onboard HUB to reset and add power to hub 1 - - --- 2023-01-21 Anand Moon Superseded
[v3,7/9] arm64: dts: amlogic: Used onboard usb hub reset on odroid c4 Used onboard HUB to reset and add power to hub - - - --- 2023-01-21 Anand Moon Superseded
[v3,6/9] dt-bindings: usb: Add Via lab VL817 hub Used onboard HUB to reset and add power to hub - 1 - --- 2023-01-21 Anand Moon Superseded
[v3,5/9] vendor-prefixes: Add VIA Labs, Inc. Used onboard HUB to reset and add power to hub 1 - - --- 2023-01-21 Anand Moon Superseded
[v3,4/9] usb: misc: onboard_usb_hub: add Genesys Logic GL852G hub support Used onboard HUB to reset and add power to hub 1 - - --- 2023-01-21 Anand Moon Superseded
[v3,3/9] arm64: dts: amlogic: Used onboard usb hub reset on odroid c2 Used onboard HUB to reset and add power to hub - 1 - --- 2023-01-21 Anand Moon Superseded
[v3,2/9] ARM: dts: amlogic: Used onboard usb hub reset on odroid c1 Used onboard HUB to reset and add power to hub - 1 - --- 2023-01-21 Anand Moon Superseded
[v3,1/9] dt-bindings: usb: Add device id for Genesys Logic hub controller Used onboard HUB to reset and add power to hub 1 - - --- 2023-01-21 Anand Moon Superseded
[v2,9/9] arm64: defconfig: Enable USB onboard HUB driver Used onboard HUB to reset and add power to hub - 1 - --- 2023-01-18 Anand Moon Superseded
[v2,8/9] usb: misc: onboard_usb_hub: add VIA LAB VL817 hub support Used onboard HUB to reset and add power to hub 1 - - --- 2023-01-18 Anand Moon Superseded
[v2,7/9] arm64: dts: amlogic: Used onboard usb hub reset on odroid c4 Used onboard HUB to reset and add power to hub - - - --- 2023-01-18 Anand Moon Superseded
[v2,6/9] dt-bindings: usb: Add binding for Via lab VL817 hub controller Used onboard HUB to reset and add power to hub - - - --- 2023-01-18 Anand Moon Superseded
[v2,5/9] vendor-prefixes: Add VIA Labs, Inc. Used onboard HUB to reset and add power to hub 1 - - --- 2023-01-18 Anand Moon Superseded
[v2,4/9] usb: misc: onboard_usb_hub: add Genesys Logic GL852G hub support Used onboard HUB to reset and add power to hub 1 - - --- 2023-01-18 Anand Moon Superseded
[v2,3/9] arm64: dts: amlogic: Used onboard usb hub reset on odroid c2 Used onboard HUB to reset and add power to hub - 1 - --- 2023-01-18 Anand Moon Superseded
[v2,2/9] ARM: dts: amlogic: Used onboard usb hub reset to enable usb hub Used onboard HUB to reset and add power to hub - 1 - --- 2023-01-18 Anand Moon Superseded
[v2,1/9] dt-bindings: usb: Add device id for Genesys Logic hub controller Used onboard HUB to reset and add power to hub 1 - - --- 2023-01-18 Anand Moon Superseded
[v1,11/11] arm64: defconfig: Enable USB onboard HUB driver Used onboard HUB to reset and add power to hub - - - --- 2022-12-28 Anand Moon Superseded
[v1,10/11] usb: misc: onboard_usb_hub: add VIA LAB VL817Q7 hub support Used onboard HUB to reset and add power to hub - - - --- 2022-12-28 Anand Moon Superseded
[v1,09/11] arm64: dts: meson-sm1-odroid-c4: Used onboard usb hub reset on odroid c4 Used onboard HUB to reset and add power to hub - - - --- 2022-12-28 Anand Moon Superseded
[v1,08/11] dt-bindings: usb: Add binding for Via lab VL817Q7 hub controller Used onboard HUB to reset and add power to hub - - - --- 2022-12-28 Anand Moon Superseded
[v1,07/11] vendor-prefixes: Add VIA Labs, Inc. Used onboard HUB to reset and add power to hub 1 - - --- 2022-12-28 Anand Moon Superseded
[v1,06/11] usb: misc: onboard_usb_hub: add Genesys Logic GL3523-QFN76 hub support Used onboard HUB to reset and add power to hub - - - --- 2022-12-28 Anand Moon Superseded
[v1,05/11] usb: misc: onboard_usb_hub: add Genesys Logic GL852G-OHG hub support Used onboard HUB to reset and add power to hub - - - --- 2022-12-28 Anand Moon Superseded
[v1,04/11] arm64: dts: amlogic: Used onboard usb hub reset on odroid n2 Used onboard HUB to reset and add power to hub - - - --- 2022-12-28 Anand Moon Superseded
[v1,03/11] arm64: dts: amlogic: Used onboard usb hub reset on odroid c2 Used onboard HUB to reset and add power to hub - - - --- 2022-12-28 Anand Moon Superseded
[v1,02/11] ARM: dts: amlogic: Used onboard usb hub reset to enable usb hub Used onboard HUB to reset and add power to hub - - - --- 2022-12-28 Anand Moon Superseded
[v1,01/11] dt-bindings: usb: Add device id for Genesys Logic hub controller Used onboard HUB to reset and add power to hub - - - --- 2022-12-28 Anand Moon Superseded
[PATCHv2] arm64: dts: meson: Enable active coling using gpio-fan on Odroid N2/N2+ [PATCHv2] arm64: dts: meson: Enable active coling using gpio-fan on Odroid N2/N2+ - - - --- 2022-10-21 Anand Moon Superseded
arm64: dts: meson: Enable active coling using gpio-fan on Odroid N2/N2+ arm64: dts: meson: Enable active coling using gpio-fan on Odroid N2/N2+ - - - --- 2022-10-18 Anand Moon Superseded
[PATCHv3] regulator: pwm-regulator: Make use of the helper function dev_err_probe() [PATCHv3] regulator: pwm-regulator: Make use of the helper function dev_err_probe() 1 - - --- 2021-09-21 Anand Moon Superseded
[PATCHv2] regulator: pwm-regulator: Make use of the helper function dev_err_probe() [PATCHv2] regulator: pwm-regulator: Make use of the helper function dev_err_probe() - - - --- 2021-09-20 Anand Moon Superseded
arm64: dts: meson-g12b-odroid-n2: add 5v regulator gpio arm64: dts: meson-g12b-odroid-n2: add 5v regulator gpio 1 - - --- 2021-09-19 Anand Moon Superseded
regulator: pwm-regulator: Make use of the helper function dev_err_probe() regulator: pwm-regulator: Make use of the helper function dev_err_probe() - - - --- 2021-09-19 Anand Moon Superseded
[PATCHv2,4/4] phy: amlogic: meson8b-usb2: don't log an error on -EPROBE_DEFER Meson-8b and Meson-gxbb Fix some missing code - 1 - --- 2021-07-16 Anand Moon Superseded
[PATCHv2,3/4] phy: amlogic: meson8b-usb2: Power off the PHY by putting it into reset mode Meson-8b and Meson-gxbb Fix some missing code 1 - - --- 2021-07-16 Anand Moon Superseded
[PATCHv2,2/4] arm64: dts: amlogic: odroidc2: Fix the chip enable signal for usb power Meson-8b and Meson-gxbb Fix some missing code - - - --- 2021-07-16 Anand Moon Superseded
[PATCHv2,1/4] ARM: dts: meson8b: odroidc1: Add usb phy power node Meson-8b and Meson-gxbb Fix some missing code - - - --- 2021-07-16 Anand Moon Superseded
ARM: multi_v7_defconfig: Enable CONFIG_MMC_MESON_MX_SDHC ARM: multi_v7_defconfig: Enable CONFIG_MMC_MESON_MX_SDHC - 1 - --- 2021-07-14 Anand Moon Superseded
[PATCHv1,3/3] phy: amlogic: meson8b-usb2: don't log an error on -EPROBE_DEFER Meson-8b and Meson-gxbb Fix some missing code - 1 - --- 2021-07-13 Anand Moon Superseded
[PATCHv1,2/3] phy: amlogic: meson8b-usb2: Power off the PHY by putting it into reset mode Meson-8b and Meson-gxbb Fix some missing code 1 - - --- 2021-07-13 Anand Moon Superseded
[PATCHv1,1/3] ARM: dts: meson8b: odroidc1: Add usb phy power node Meson-8b and Meson-gxbb Fix some missing code - - - --- 2021-07-13 Anand Moon Superseded
[v3,2/2] arm64: defconfig: Enable RTC devices for Amlogic boards Enable RTC on Odroid N2 1 - - --- 2020-08-20 Anand Moon Superseded
[v3,1/2] arm64: dts: meson-g12b-odroid-n2: Enable RTC controller node Enable RTC on Odroid N2 - - - --- 2020-08-20 Anand Moon Superseded
[v2,3/3] arm64: defconfig: Enable RTC devices for Amlogic boards Enable RTC on Odroid N2 1 - - --- 2020-08-17 Anand Moon Superseded
[v2,2/3] arm64: dts: meson-g12b-odroid-n2: Disable virtual RTC driver Enable RTC on Odroid N2 - - - --- 2020-08-17 Anand Moon Superseded
[v2,1/3] arm64: dts: meson-g12b-odroid-n2: Enable RTC controller node Enable RTC on Odroid N2 - - - --- 2020-08-17 Anand Moon Superseded
[v1,3/3] arm64: dts: amlogic: meson-g12: add missing ethernet reset ID Add missing ethernet reset ID for Amlogic SoC - - - --- 2020-07-30 Anand Moon Superseded
[v1,2/3] arm64: dts: amlogic: meson-axg: add missing ethernet reset ID Add missing ethernet reset ID for Amlogic SoC - - - --- 2020-07-30 Anand Moon Superseded
[v1,1/3] arm64: dts: amlogic: meson-gx: add missing ethernet reset ID Add missing ethernet reset ID for Amlogic SoC - - - --- 2020-07-30 Anand Moon Superseded
[PATCHv1,3/3] arm64: defconfig: Enable RTC devices for Amlogic boards Enable RTC on Odroid N2 1 - - --- 2020-07-15 Anand Moon Superseded
[PATCHv1,2/3] arm64: dts: meson-g12b-odroid-n2: Disable virtual wake RTC Enable RTC on Odroid N2 - - - --- 2020-07-15 Anand Moon Superseded
[PATCHv1,1/3] arm64: dts: meson-g12b-odroid-n2: Enable RTC controller node Enable RTC on Odroid N2 - - - --- 2020-07-15 Anand Moon Superseded
[PATCHv2,2/2] clk: meson: g12a: set cpub_clk flags to CLK_IS_CRITICAL Odroid N2 failes to boot using upstream kernel using microSD card - - - --- 2020-03-02 Anand Moon narmstrong Not Applicable
[PATCHv2,1/2] arm64: dts: meson: Add missing regulator linked to VDDAO_3V3 regulator to FLASH_VDD Odroid N2 failes to boot using upstream kernel using microSD card - 1 - --- 2020-03-02 Anand Moon Not Applicable
[PATCHv1,3/3] clk: meson: g12a: set cpu clock divider flags too CLK_IS_CRITICAL Odroid N2 failes to boot using upstream kernel using microSD card - - - --- 2020-02-16 Anand Moon narmstrong Superseded
[PATCHv1,2/3] arm64: dts: meson: Add missing regulator linked to VCCV5 regulator to VDDIO_C/TF_IO Odroid N2 failes to boot using upstream kernel using microSD card - 1 - --- 2020-02-16 Anand Moon Superseded
[PATCHv1,1/3] arm64: dts: meson: Add missing regulator linked to VDDAO_3V3 regulator to FLASH_VDD Odroid N2 failes to boot using upstream kernel using microSD card - 1 - --- 2020-02-16 Anand Moon Superseded
[PATCHv1,3/3] crypto: amlogic: Add new compatible string for amlogic GXBB SoC Enable crypto module on Amlogic GXBB SoC platform - - - --- 2019-12-11 Anand Moon Not Applicable
[PATCHv1,2/3] dt-bindings: crypto: Add compatible string for amlogic GXBB SoC Enable crypto module on Amlogic GXBB SoC platform - - - --- 2019-12-11 Anand Moon Not Applicable
[PATCHv1,1/3] arm64: dts: amlogic: adds crypto hardware node for GXBB SoCs Enable crypto module on Amlogic GXBB SoC platform - - - --- 2019-12-11 Anand Moon Not Applicable
[RFC-next,1/1] arm64: dts: meson: odroid-c2: Enable SCPI DVFS for cpu Odroid C2: Enable DVFS for cpu - - - --- 2019-11-01 Anand Moon Not Applicable
[RFCv1,5/5] arm64/ARM: configs: Change CONFIG_PWM_MESON from m to y Odroid N2 failes to boot using upstream kernel & u-boot 1 - 1 --- 2019-10-07 Anand Moon Not Applicable
[RFCv1,4/5] arm64: dts: meson: Add missing regulator linked to VCCV5 regulator to VDDIO_C/TF_IO Odroid N2 failes to boot using upstream kernel & u-boot - 1 - --- 2019-10-07 Anand Moon Not Applicable
[RFCv1,3/5] arm64: dts: meson: Add missing regulator linked to VDDAO_3V3 regulator to FLASH_VDD Odroid N2 failes to boot using upstream kernel & u-boot - 1 - --- 2019-10-07 Anand Moon Not Applicable
[RFCv1,2/5] arm64: dts: meson: Add missing pwm control gpio signal for pwm-regulator Odroid N2 failes to boot using upstream kernel & u-boot - - - --- 2019-10-07 Anand Moon Not Applicable
[RFCv1,1/5] arm64: dts: meson: Add missing 5V_EN gpio signal for VCC5V regulator Odroid N2 failes to boot using upstream kernel & u-boot - - - --- 2019-10-07 Anand Moon Not Applicable
[PATCHv3,RESEND-next,3/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to HDMI supply Odroid c2 missing regulator linking - 2 - --- 2019-10-01 Anand Moon Mainlined
[PATCHv3,RESEND-next,2/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to VDDIO_AO3V3… Odroid c2 missing regulator linking - 2 - --- 2019-10-01 Anand Moon Mainlined
[PATCHv3,RESEND-next,1/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to P5V0 regula… Odroid c2 missing regulator linking - 2 - --- 2019-10-01 Anand Moon Mainlined
[RFCv1,1/1] arm64: dts: meson: odroid-c2: Enable SCPI DVFS for cpu Odroid C2: Enable DVFS for cpu - - - --- 2019-09-07 Anand Moon Superseded
[PATCHv3-next,3/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to HDMI supply Odroid c2 missing regulator linking - 2 - --- 2019-09-06 Anand Moon Superseded
[PATCHv3-next,2/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to VDDIO_AO3V3 regula… Odroid c2 missing regulator linking - 2 - --- 2019-09-06 Anand Moon Superseded
[PATCHv3-next,1/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to P5V0 regulator Odroid c2 missing regulator linking - 2 - --- 2019-09-06 Anand Moon Superseded
[PATCHv2-next,3/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to HDMI supply Odroid c2 missing regulator linking - 1 - --- 2019-09-02 Anand Moon Superseded
[PATCHv2-next,2/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to VDDIO_AO3V3 regula… Odroid c2 missing regulator linking - 1 - --- 2019-09-02 Anand Moon Superseded
[PATCHv2-next,1/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to P5V0 regulator Odroid c2 missing regulator linking - 1 - --- 2019-09-02 Anand Moon Superseded
[PATCHv4-next,3/3] arm64: dts: meson: odroid-c2: Disable usb_otg bus to avoid power failed warning Odroid c2 usb fixs rebase on linux-next 1 - - --- 2019-09-02 Anand Moon Not Applicable
[PATCHv4-next,2/3] arm64: dts: meson: odroid-c2: Add missing linking regulator to usb bus Odroid c2 usb fixs rebase on linux-next 1 - - --- 2019-09-02 Anand Moon Not Applicable
[PATCHv4-next,1/3] arm64: dts: meson: odroid-c2: p5v0 is the main 5V power input Odroid c2 usb fixs rebase on linux-next 1 - - --- 2019-09-02 Anand Moon Not Applicable
[PATCHv1,3/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to HDMI supply Odroid c2 missing regulator linking - - - --- 2019-08-28 Anand Moon Superseded
[PATCHv1,2/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to VDDIO_AO3V3 regulator Odroid c2 missing regulator linking - 1 - --- 2019-08-28 Anand Moon Superseded
[PATCHv1,1/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to P5V0 regulator Odroid c2 missing regulator linking - - - --- 2019-08-28 Anand Moon Superseded
« 1 2 »