Show patches with: Submitter = Philipp Zabel       |    State = Action Required       |   507 patches
« 1 2 3 4 … 5 6 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v6,1/3] of: Decrement refcount of previous endpoint in of_graph_get_next_endpoint - - - --- 2014-12-22 Philipp Zabel New
[2/2] ARM: dts: imx6qdl: remove USBOH3 clock from usbmisc, it is clocked by IPG - - - --- 2014-12-09 Philipp Zabel New
[1/2] usb: chipidea: usbmisc: skip clocks on i.MX6 - - - --- 2014-12-09 Philipp Zabel New
ARM: imx: irq: fix buggy usage of irq_data irq field - - - --- 2014-12-01 Philipp Zabel New
[1/2] clk: Do not complain about correctly set read-only muxes when assigning clock parents from de… - - - --- 2014-12-01 Philipp Zabel New
ARM: dts: imx6qdl: Fix CODA960 interrupt order - - - --- 2014-11-28 Philipp Zabel New
[1/2] regulator: anatop: allow LDO bypass to be set from device-tree - - - --- 2014-09-26 Philipp Zabel New
[v8,2/5] ARM: imx6: gpc: Add PU power domain for GPU/VPU - - - --- 2014-09-10 Philipp Zabel New
[v8,5/5] ARM: dts: imx6qdl: Allow disabling the PU regulator, add a enable ramp delay - - - --- 2014-09-09 Philipp Zabel New
[v8,4/5] ARM: dts: imx6sl: Add power-domain information to gpc node - - - --- 2014-09-09 Philipp Zabel New
[v8,3/5] ARM: dts: imx6qdl: Add power-domain information to gpc node - - - --- 2014-09-09 Philipp Zabel New
[v8,2/5] ARM: imx6: gpc: Add PU power domain for GPU/VPU - - - --- 2014-09-09 Philipp Zabel New
[v8,1/5] Documentation: Add device tree bindings for Freescale i.MX GPC - - - --- 2014-09-09 Philipp Zabel New
[v2,5/5] rtc: rtc-isl12057: Change vendor prefix for Intersil Corporation to isil - - - --- 2014-09-08 Philipp Zabel New
[v2,4/5] rtc: rtc-isl12022: Change vendor prefix for Intersil Corporation to isil - - - --- 2014-09-08 Philipp Zabel New
[v2,3/5] ARM: mvebu: Change vendor prefix for Intersil Corporation to isil - - - --- 2014-09-08 Philipp Zabel New
[v2,2/5] Documentation: Add isl1208 and isl12022 to trivial-devices list - - - --- 2014-09-08 Philipp Zabel New
[v2,1/5] of: Change vendor prefix for Intersil Corporation to isil - - - --- 2014-09-08 Philipp Zabel New
[v7,5/5] ARM: dts: imx6qdl: Allow disabling the PU regulator, add a enable ramp delay - - - --- 2014-08-26 Philipp Zabel New
[v7,4/5] ARM: dts: imx6sl: Add power-domain information to gpc node - - - --- 2014-08-26 Philipp Zabel New
[v7,3/5] ARM: dts: imx6qdl: Add power-domain information to gpc node - - - --- 2014-08-26 Philipp Zabel New
[v7,2/5] ARM: imx6: gpc: Add PU power domain for GPU/VPU - - - --- 2014-08-26 Philipp Zabel New
[v7,1/5] Documentation: Add device tree bindings for Freescale i.MX GPC - - - --- 2014-08-26 Philipp Zabel New
ARM: dts: nitrogen6x: Add Intersil ISL1208 RTC - - - --- 2014-08-22 Philipp Zabel New
[RFC,6/6] rtc: rtc-isl12057: Change vendor prefix for Intersil Corporation to isil - - - --- 2014-08-20 Philipp Zabel New
[RFC,5/6] rtc: rtc-isl12022: Change vendor prefix for Intersil Corporation to isil - - - --- 2014-08-20 Philipp Zabel New
[RFC,4/6] powerpc/85xx: Change vendor prefix for Intersil Corporation to isil - - - --- 2014-08-20 Philipp Zabel New
[RFC,3/6] ARM: mvebu: Change vendor prefix for Intersil Corporation to isil - - - --- 2014-08-20 Philipp Zabel New
[RFC,2/6] Documentation: Add isl1208 and isl12022 to trivial-devices list - - - --- 2014-08-20 Philipp Zabel New
[RFC,1/6] of: Change vendor prefix for Intersil Corporation to isil - - - --- 2014-08-20 Philipp Zabel New
[2/2] imx-drm: ipuv3-plane: fix kernel Oops in ipu_dp_put() - - - --- 2014-08-19 Philipp Zabel New
[5/5] imx-drm: use for_each_endpoint_of_node macro in imx_drm_encoder_get_mux_id - - - --- 2014-07-04 Philipp Zabel New
[4/5] drm: use for_each_endpoint_of_node macro in drm_of_find_possible_crtcs - - - --- 2014-07-04 Philipp Zabel New
[3/5] of: Add for_each_endpoint_of_node helper macro - - - --- 2014-07-04 Philipp Zabel New
[2/5] of: Decrement refcount of previous endpoint in of_graph_get_next_endpoint - - - --- 2014-07-04 Philipp Zabel New
[1/5] imx-drm: Drop imx_drm_of_get_next_endpoint wrapper - - - --- 2014-07-04 Philipp Zabel New
[4/4] ARM: dts: imx6qdl: Enable CODA960 VPU - - - --- 2014-06-13 Philipp Zabel New
[3/4] of: Add named interrupts to CODA bindings - - - --- 2014-06-13 Philipp Zabel New
[2/4] of: Add new compatibles for CODA bindings - - - --- 2014-06-13 Philipp Zabel New
[1/4] of: Add vendor prefix for Chips&Media, Inc. - - - --- 2014-06-13 Philipp Zabel New
ARM: dts: imx6qdl: Add CSI device tree port nodes for IPU1 and IPU2 - - - --- 2014-05-27 Philipp Zabel New
ARM: dts: pfla02: Add ethernet phy supply regulator - - - --- 2014-05-27 Philipp Zabel New
ARM: dts: pfla02: Add ethernet phy supply regulator - - - --- 2014-05-26 Philipp Zabel New
ARM: dts: imx6qdl-gw5xxx: Fix Linear Technology vendor prefix - - - --- 2014-05-26 Philipp Zabel New
[10/10] ARM: dts: pbab01: Enable DVI - - - --- 2014-04-14 Philipp Zabel New
[09/10] ARM: dts: pbab01: Enable UART1 - - - --- 2014-04-14 Philipp Zabel New
[08/10] ARM: dts: pfla02: Add UART1 (uart3) - - - --- 2014-04-14 Philipp Zabel New
[07/10] ARM: dts: pbab01: Add I2C devices - - - --- 2014-04-14 Philipp Zabel New
[06/10] ARM: dts: pbab01: Add I2C2 and I2C3 - - - --- 2014-04-14 Philipp Zabel New
[05/10] ARM: dts: pbab01: Set linux,stdout-path to UART4 - - - --- 2014-04-14 Philipp Zabel New
[04/10] ARM: dts: pfla02: PHY reset is active-low - - - --- 2014-04-14 Philipp Zabel New
[03/10] ARM: dts: pfla02: Add GPIO LEDs - - - --- 2014-04-14 Philipp Zabel New
[02/10] ARM: dts: Add Phytec pbab01 with i.MX6 DualLite/Solo - - - --- 2014-04-14 Philipp Zabel New
[01/10] ARM: dts: Add Phytec pfla02 with i.MX6 DualLite/Solo - - - --- 2014-04-14 Philipp Zabel New
[2/2] ARM: i.MX6: ipu_di_sel clocks can set parent rates - - - --- 2014-04-14 Philipp Zabel New
[1/2] ARM: imx6q: clk: Parent DI clocks to video PLL via di_pre_sel - - - --- 2014-04-14 Philipp Zabel New
[v4,2/2] reset: Add GPIO support to reset controller framework - - - --- 2014-04-14 Philipp Zabel New
[v4,1/2] Documentation: Add GPIO reset binding to reset binding documentation - - - --- 2014-04-14 Philipp Zabel New
ARM: imx: propagate DI clock changes up the clock tree to PLL5 - - - --- 2014-04-10 Philipp Zabel New
[v5,00/11] imx-drm dt bindings - - - --- 2014-03-11 Philipp Zabel New
[1/2] imx-drm: imx-ldb: Add drm_panel support - - - --- 2014-03-07 Philipp Zabel New
[2/2] imx-drm: imx-ldb: Use OF graph to find connected panel - - - --- 2014-03-06 Philipp Zabel New
[1/2] imx-drm: imx-ldb: Add drm_panel support - - - --- 2014-03-06 Philipp Zabel New
[v6,5/5] ARM: dts: imx6qdl: Allow disabling the PU regulator, add a enable ramp delay - - - --- 2014-03-06 Philipp Zabel New
[v6,4/5] ARM: dts: imx6sl: Add power-domain information to gpc node - - - --- 2014-03-06 Philipp Zabel New
[v6,3/5] ARM: dts: imx6qdl: Add power-domain information to gpc node - - - --- 2014-03-06 Philipp Zabel New
[v6,2/5] ARM: imx6: gpc: Add PU power domain for GPU/VPU - - - --- 2014-03-06 Philipp Zabel New
[v6,1/5] Documentation: Add device tree bindings for Freescale i.MX GPC - - - --- 2014-03-06 Philipp Zabel New
[v5,01/11] staging: imx-drm-core: Use OF graph to find components and connections between encoder a… - - - --- 2014-03-05 Philipp Zabel New
[v5,11/11] staging: imx-drm: Update TODO - - - --- 2014-03-05 Philipp Zabel New
[v5,10/11] ARM: dts: imx6qdl: Add IPU DI ports and endpoints, move imx-drm node to dtsi - - - --- 2014-03-05 Philipp Zabel New
[v5,09/11] ARM: dts: imx53: Add IPU DI ports and endpoints, move imx-drm node to dtsi - - - --- 2014-03-05 Philipp Zabel New
[v5,08/11] ARM: dts: imx51: Add IPU ports and endpoints, move imx-drm node to dtsi - - - --- 2014-03-05 Philipp Zabel New
[v5,07/11] ARM: dts: imx53-mba53: Fix TVE DDC I2C bus property - - - --- 2014-03-05 Philipp Zabel New
[v5,06/11] imx-drm: imx-tve: Fix DDC I2C bus property - - - --- 2014-03-05 Philipp Zabel New
[v5,05/11] imx-drm: imx-hdmi: Fix DDC I2C bus property - - - --- 2014-03-05 Philipp Zabel New
[v5,04/11] staging: imx-drm: Document imx-hdmi device tree bindings - - - --- 2014-03-05 Philipp Zabel New
[v5,03/11] staging: imx-drm: Document updated imx-drm device tree bindings - - - --- 2014-03-05 Philipp Zabel New
[v5,02/11] staging: imx-drm-core: use of_graph_parse_endpoint - - - --- 2014-03-05 Philipp Zabel New
[v5,01/11] staging: imx-drm-core: Use OF graph to find components and connections between encoder a… - - - --- 2014-03-05 Philipp Zabel New
[v5,5/5] ARM: dts: imx6qdl: Allow disabling the PU regulator, add a enable ramp delay - - - --- 2014-02-28 Philipp Zabel New
[v5,4/5] ARM: dts: imx6sl: Add power-domain information to gpc node - - - --- 2014-02-28 Philipp Zabel New
[v5,3/5] ARM: dts: imx6qdl: Add power-domain information to gpc node - - - --- 2014-02-28 Philipp Zabel New
[v5,2/5] ARM: imx6: gpc: Add PU power domain for GPU/VPU - - - --- 2014-02-28 Philipp Zabel New
[v5,1/5] Documentation: Add device tree bindings for Freescale i.MX GPC - - - --- 2014-02-28 Philipp Zabel New
[RFC,v4,8/8] staging: imx-drm: Update TODO - - - --- 2014-02-25 Philipp Zabel New
[RFC,v4,7/8] ARM: dts: imx6qdl: Add IPU DI ports and endpoints, move imx-drm node to dtsi - - - --- 2014-02-25 Philipp Zabel New
[RFC,v4,6/8] ARM: dts: imx53: Add IPU DI ports and endpoints, move imx-drm node to dtsi - - - --- 2014-02-25 Philipp Zabel New
[RFC,v4,5/8] ARM: dts: imx51: Add IPU ports and endpoints, move imx-drm node to dtsi - - - --- 2014-02-25 Philipp Zabel New
[RFC,v4,4/8] staging: imx-drm: Document imx-hdmi device tree bindings - - - --- 2014-02-25 Philipp Zabel New
[RFC,v4,3/8] staging: imx-drm: Document updated imx-drm device tree bindings - - - --- 2014-02-25 Philipp Zabel New
[RFC,v4,2/8] staging: imx-drm-core: use of_graph_parse_endpoint - - - --- 2014-02-25 Philipp Zabel New
[RFC,v4,1/8] staging: imx-drm-core: Use OF graph to find components and connections between encoder… - - - --- 2014-02-25 Philipp Zabel New
[v3,2/2] ARM i.MX6q: Mark VPU and IPU AXI transfers as cacheable, increase IPU priority - - - --- 2014-02-24 Philipp Zabel New
[v3,1/2] ARM: imx6q: Add GPR6 and GPR7 register definitions for iomuxc gpr - - - --- 2014-02-24 Philipp Zabel New
[v2,2/2] ARM i.MX6q: Mark VPU and IPU AXI transfers as cacheable, increase IPU priority - - - --- 2014-02-24 Philipp Zabel New
[v2,1/2] ARM: imx6q: Add GPR6 and GPR7 register definitions for iomuxc gpr - - - --- 2014-02-24 Philipp Zabel New
[RFC,2/2] ARM: imx6q: Mark VPU and IPU AXI transfers as cacheable, increase IPU priority - - - --- 2014-02-20 Philipp Zabel New
[RFC,1/2] ARM: imx6q: Add GPR6 and GPR7 register definitions for iomuxc gpr - - - --- 2014-02-20 Philipp Zabel New
[v4,7/7] ARM: dts: imx6sl: Add power-domain information to gpc node - - - --- 2014-02-18 Philipp Zabel New
« 1 2 3 4 … 5 6 »