Show patches with: Submitter = Sascha Hauer       |   1191 patches
« 1 2 ... 5 6 7 … 11 12 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v2] ARM: dts: imx53-qsb: disable 1.2GHz OPP [v2] ARM: dts: imx53-qsb: disable 1.2GHz OPP - - - --- 2018-09-12 Sascha Hauer New
ARM: dts: imx53-qsb: disable 1.2GHz OPP ARM: dts: imx53-qsb: disable 1.2GHz OPP - - - --- 2018-09-10 Sascha Hauer New
[v2,4/4] mailbox: Add support for i.MX7D messaging unit - - - --- 2018-06-26 Sascha Hauer New
[v2,0/5] add virt-dma support for imx-sdma - - - --- 2018-06-08 Sascha Hauer New
[2/2] dt-bindings: nvmem: Add i.MX IIM binding doc - - - --- 2017-03-03 Sascha Hauer New
[1/2] nvmem: Add driver for the i.MX IIM - - - --- 2017-03-03 Sascha Hauer New
imx: Race when disabling RX in IMX.6 UART in half duplex - - - --- 2017-02-22 Sascha Hauer New
[2/2] dt-bindings: nvmem: Add i.MX IIM binding doc - - - --- 2017-02-13 Sascha Hauer New
[1/2] nvmem: Add driver for the i.MX IIM - - - --- 2017-02-13 Sascha Hauer New
[4/4] ARM: dts: imx7: Add "LPSR" to LPSR iomux pin names - 1 - --- 2017-01-19 Sascha Hauer New
[3/4] ARM: dts: imx7d-cl-som: Fix OTG power pinctrl - 1 - --- 2017-01-19 Sascha Hauer New
[2/4] ARM: dts: imx7d-sdp: Fix watchdog and pwm pinmux - 1 - --- 2017-01-19 Sascha Hauer New
[1/4] ARM: dts: imx7s-warp: Fix watchdog pinmux - 1 - --- 2017-01-19 Sascha Hauer New
[4/4] serial: imx: Add LED trigger support - - - --- 2016-11-23 Sascha Hauer New
[3/4] serial: cpm_uart: Add LED trigger support - - - --- 2016-11-23 Sascha Hauer New
[2/4] serial: 8250: Add LED trigger support - - - --- 2016-11-23 Sascha Hauer New
[1/4] serial: core: Add LED trigger support - - - --- 2016-11-23 Sascha Hauer New
[8/9] mtd: nand: mxc: implement onfi get/set features - - - --- 2016-11-22 Sascha Hauer New
[2/2] gpio: mxs: fix duplicate level interrupts - 1 - --- 2016-10-21 Sascha Hauer New
[1/2] gpio: mxs: use enable/disable regs to (un)mask irqs - 1 - --- 2016-10-21 Sascha Hauer New
serial: imx: Fix DCD reading 1 1 - --- 2016-09-26 Sascha Hauer New
[9/9] mtd: nand: mxc: Add timing setup for v2 controllers - - - --- 2016-09-15 Sascha Hauer New
[8/9] mtd: nand: mxc: implement onfi get/set features - - - --- 2016-09-15 Sascha Hauer New
[7/9] mtd: nand: sunxi: switch from manual to automated timing config - - - --- 2016-09-15 Sascha Hauer New
[6/9] mtd: nand: automate NAND timings selection - - - --- 2016-09-15 Sascha Hauer New
[5/9] mtd: nand: Expose data interface for ONFI mode 0 - - - --- 2016-09-15 Sascha Hauer New
[4/9] mtd: nand: Add function to convert ONFI mode to data_interface - - - --- 2016-09-15 Sascha Hauer New
[3/9] mtd: nand: convert ONFI mode into data interface - - - --- 2016-09-15 Sascha Hauer New
[2/9] mtd: nand: Introduce nand_data_interface - - - --- 2016-09-15 Sascha Hauer New
[1/9] mtd: nand: Create a NAND reset function - - - --- 2016-09-15 Sascha Hauer New
[9/9] mtd: nand: mxc: Add timing setup for v2 controllers - - - --- 2016-09-09 Sascha Hauer New
[8/9] mtd: nand: mxc: implement onfi get/set features - - - --- 2016-09-09 Sascha Hauer New
[7/9] mtd: nand: sunxi: switch from manual to automated timing config - - - --- 2016-09-09 Sascha Hauer New
[6/9] mtd: nand: automate NAND timings selection - - - --- 2016-09-09 Sascha Hauer New
[5/9] mtd: nand: Expose data interface for ONFI mode 0 - - - --- 2016-09-09 Sascha Hauer New
[4/9] mtd: nand: Add function to convert ONFI mode to data_interface - - - --- 2016-09-09 Sascha Hauer New
[3/9] mtd: nand: convert ONFI mode into data interface - - - --- 2016-09-09 Sascha Hauer New
[2/9] mtd: nand: Introduce nand_data_interface - - - --- 2016-09-09 Sascha Hauer New
[1/9] mtd: nand: Create a NAND reset function - - - --- 2016-09-09 Sascha Hauer New
[7/7] mtd: nand: remove unnecessary 'extern' from function declarations - - - --- 2016-09-07 Sascha Hauer New
[6/7] mtd: nand: mxc: Add timing setup for v2 controllers - - - --- 2016-09-07 Sascha Hauer New
[5/7] mtd: nand: mxc: implement onfi get/set features - - - --- 2016-09-07 Sascha Hauer New
[4/7] mtd: nand: sunxi: switch from manual to automated timing config - - - --- 2016-09-07 Sascha Hauer New
[3/7] mtd: nand: automate NAND timings selection - - - --- 2016-09-07 Sascha Hauer New
[2/7] mtd: nand: Introduce nand_data_interface - - - --- 2016-09-07 Sascha Hauer New
[1/7] mtd: nand: Create a NAND reset function - - - --- 2016-09-07 Sascha Hauer New
[7/7] mtd: nand: mxc: Add timing setup for v2 controllers - - - --- 2016-09-06 Sascha Hauer New
[6/7] mtd: nand: mxc: implement onfi get/set features - - - --- 2016-09-06 Sascha Hauer New
[5/7] mtd: nand: sunxi: switch from manual to automated timing config - - - --- 2016-09-06 Sascha Hauer New
[4/7] mtd: nand: automate NAND timings selection - - - --- 2016-09-06 Sascha Hauer New
[3/7] mtd: nand: convert ONFI mode into data interface - - - --- 2016-09-06 Sascha Hauer New
[2/7] mtd: nand: Introduce nand_data_interface - - - --- 2016-09-06 Sascha Hauer New
[1/7] mtd: nand: Create a NAND reset function - - - --- 2016-09-06 Sascha Hauer New
[2/2] mtd: mxc_nand: Set timing for v2 controllers - - - --- 2016-09-02 Sascha Hauer New
[1/2] mtd: nand: automate NAND timings selection - - - --- 2016-09-02 Sascha Hauer New
mtd: mxc_nand: Set timing for v2 controllers - - - --- 2016-08-23 Sascha Hauer New
ARM: SoCFPGA: simplify secondary trampoline - - - --- 2016-04-21 Sascha Hauer New
ARM: SoCFPGA: Fix secondary CPU startup in thumb2 kernel - - - --- 2016-04-20 Sascha Hauer New
SoCFPGA with CONFIG_THUMB2_KERNEL boot error - - - --- 2016-04-20 Sascha Hauer New
ARM: dts: imx53-qsb: Fix gpio button polarity - - - --- 2016-03-01 Sascha Hauer New
[9/9] spi: imx: drop bogus tests for rx/tx bufs in DMA transfer - - - --- 2016-02-24 Sascha Hauer New
[8/9] spi: imx: set MX51_ECSPI_CTRL_SMC bit in setup function - - - --- 2016-02-24 Sascha Hauer New
[7/9] spi: imx: make some register defines simpler - - - --- 2016-02-24 Sascha Hauer New
[6/9] spi: imx: remove unnecessary bit clearing in mx51_ecspi_config - - - --- 2016-02-24 Sascha Hauer New
[5/9] spi: imx: add support for all SPI word width for DMA - - - --- 2016-02-24 Sascha Hauer New
[4/9] spi: imx: drop unncessary dma_is_inited variable - - - --- 2016-02-24 Sascha Hauer New
[3/9] spi: imx: drop unnecessary read/modify/write - - - --- 2016-02-24 Sascha Hauer New
[2/9] spi: imx: initialize usedma earlier - - - --- 2016-02-24 Sascha Hauer New
[1/9] spi: imx: drop fallback to PIO - - - --- 2016-02-24 Sascha Hauer New
spi: imx: initialize usedma earlier - - - --- 2016-02-23 Sascha Hauer New
[9/9] spi: imx: drop bogus tests for rx/tx bufs in DMA transfer - - - --- 2016-02-23 Sascha Hauer New
[8/9] spi: imx: set MX51_ECSPI_CTRL_SMC bit in setup function - - - --- 2016-02-23 Sascha Hauer New
[7/9] spi: imx: make some register defines simpler - - - --- 2016-02-23 Sascha Hauer New
[6/9] spi: imx: remove unnecessary bit clearing in mx51_ecspi_config - - - --- 2016-02-23 Sascha Hauer New
[5/9] spi: imx: add support for all SPI word width for DMA - - - --- 2016-02-23 Sascha Hauer New
[4/9] spi: imx: drop unncessary dma_is_inited variable - - - --- 2016-02-23 Sascha Hauer New
[3/9] spi: imx: drop unnecessary read/modify/write - - - --- 2016-02-23 Sascha Hauer New
[2/9] spi: imx: initialize usedma earlier - - - --- 2016-02-23 Sascha Hauer New
[1/9] spi: imx: drop fallback to PIO - - - --- 2016-02-23 Sascha Hauer New
[12/12] spi: imx: drop bogus tests for rx/tx bufs in DMA transfer - - - --- 2016-02-19 Sascha Hauer New
[11/12] spi: imx: set MX51_ECSPI_CTRL_SMC bit in setup function - - - --- 2016-02-19 Sascha Hauer New
[10/12] spi: imx: make some register defines simpler - - - --- 2016-02-19 Sascha Hauer New
[09/12] spi: imx: remove unnecessary bit clearing in mx51_ecspi_config - - - --- 2016-02-19 Sascha Hauer New
[08/12] spi: imx: add support for all SPI word width for DMA - - - --- 2016-02-19 Sascha Hauer New
[07/12] spi: imx: drop unncessary dma_is_inited variable - - - --- 2016-02-19 Sascha Hauer New
[06/12] spi: imx: drop unnecessary read/modify/write - - - --- 2016-02-19 Sascha Hauer New
[05/12] spi: imx: initialize usedma earlier - - - --- 2016-02-19 Sascha Hauer New
[04/12] spi: imx: drop fallback to PIO - - - --- 2016-02-19 Sascha Hauer New
[03/12] spi: imx: replace fixed timeout with calculated - - - --- 2016-02-19 Sascha Hauer New
[02/12] spi: imx: use proper dev_* functions for driver messages - - - --- 2016-02-19 Sascha Hauer New
[01/12] spi: imx: allow only WML aligned transfers to use DMA - - - --- 2016-02-19 Sascha Hauer New
[13/13] ARM: dts: imx6: Use correct SDMA script for SPI cores - - - --- 2016-02-17 Sascha Hauer New
[12/13] spi: imx: drop bogus tests for rx/tx bufs in DMA transfer - - - --- 2016-02-17 Sascha Hauer New
[11/13] spi: imx: set MX51_ECSPI_CTRL_SMC bit in setup function - - - --- 2016-02-17 Sascha Hauer New
[10/13] spi: imx: make some register defines simpler - - - --- 2016-02-17 Sascha Hauer New
[09/13] spi: imx: remove unnecessary bit clearing in mx51_ecspi_config - - - --- 2016-02-17 Sascha Hauer New
[08/13] spi: imx: add support for all SPI word width for DMA - - - --- 2016-02-17 Sascha Hauer New
[07/13] spi: imx: drop unncessary dma_is_inited variable - - - --- 2016-02-17 Sascha Hauer New
[06/13] spi: imx: drop unnecessary read/modify/write - - - --- 2016-02-17 Sascha Hauer New
[05/13] spi: imx: initialize usedma earlier - - - --- 2016-02-17 Sascha Hauer New
« 1 2 ... 5 6 7 … 11 12 »