Show patches with: Submitter = Bhavya Kapoor       |    State = Action Required       |   73 patches
Patch Series A/R/T S/W/F Date Submitter Delegate State
arm64: dts: ti: k3-j722s-evm: Enable support for mcu_i2c0 arm64: dts: ti: k3-j722s-evm: Enable support for mcu_i2c0 - 1 - --- 2024-11-05 Bhavya Kapoor New
arm64: dts: ti: k3-j722s-evm: Add pinmux for RPi Header arm64: dts: ti: k3-j722s-evm: Add pinmux for RPi Header - - - --- 2024-10-28 Bhavya Kapoor New
arm64: dts: ti: k3-j784s4-mcu-wakeup: Configure wkup_uart0 with clock settings arm64: dts: ti: k3-j784s4-mcu-wakeup: Configure wkup_uart0 with clock settings - - - --- 2024-10-09 Bhavya Kapoor New
[v2,2/2] arm64: dts: ti: k3-j722s-evm: Describe main_uart5 Add support for multiple can instances as well as describe main_uart5 - - - --- 2024-08-27 Bhavya Kapoor New
[v2,1/2] arm64: dts: ti: k3-j722s-evm: Add support for multiple CAN instances Add support for multiple can instances as well as describe main_uart5 - 1 - --- 2024-08-27 Bhavya Kapoor New
arm64: dts: ti: k3-j722s-evm: Describe main_uart5 arm64: dts: ti: k3-j722s-evm: Describe main_uart5 - - - --- 2024-08-22 Bhavya Kapoor New
arm64: dts: ti: Add PWM and ECAP overlay for J722S-EVM arm64: dts: ti: Add PWM and ECAP overlay for J722S-EVM - - - --- 2024-08-20 Bhavya Kapoor New
[v2] arm64: dts: ti: k3-am68-sk-base-board: Add clklb pin mux for mmc1 [v2] arm64: dts: ti: k3-am68-sk-base-board: Add clklb pin mux for mmc1 - 2 - --- 2024-08-09 Bhavya Kapoor New
[RESEND] arm64: dts: ti: k3-j722s-evm: Add support for multiple CAN instances [RESEND] arm64: dts: ti: k3-j722s-evm: Add support for multiple CAN instances - 1 - --- 2024-08-08 Bhavya Kapoor New
arm64: dts: ti: k3-am68-sk-base-board: Add clklb pin mux for mmc1 arm64: dts: ti: k3-am68-sk-base-board: Add clklb pin mux for mmc1 - 2 - --- 2024-08-07 Bhavya Kapoor New
[2/2] arm64: dts: ti: k3-j7200-som-p0: Update mux-controller node name arm64: dts: ti: Update mux-controller node name - 1 - --- 2024-07-29 Bhavya Kapoor New
[1/2] arm64: dts: ti: k3-j721s2-som-p0: Update mux-controller node name arm64: dts: ti: Update mux-controller node name - - - --- 2024-07-29 Bhavya Kapoor New
arm64: dts: ti: k3-j722s-evm: Add support for multiple CAN instances arm64: dts: ti: k3-j722s-evm: Add support for multiple CAN instances - 1 - --- 2024-06-21 Bhavya Kapoor New
arm64: dts: ti: k3-j722s-evm: Enable main_uart5 arm64: dts: ti: k3-j722s-evm: Enable main_uart5 - - - --- 2024-05-28 Bhavya Kapoor New
arm64: dts: ti: k3-j722s-evm: Mark eMMC as non removable arm64: dts: ti: k3-j722s-evm: Mark eMMC as non removable - - - --- 2024-05-22 Bhavya Kapoor New
arm64: defconfig: Modify number of usable 8250 uart ports arm64: defconfig: Modify number of usable 8250 uart ports - - - --- 2024-05-16 Bhavya Kapoor New
arm64: dts: ti: k3-j722s-evm: Enable main_uart5 node arm64: dts: ti: k3-j722s-evm: Enable main_uart5 node - - - --- 2024-04-26 Bhavya Kapoor New
arm64: dts: ti: k3-j722s-evm: Enable UHS support for MMCSD arm64: dts: ti: k3-j722s-evm: Enable UHS support for MMCSD - 1 - --- 2024-04-22 Bhavya Kapoor New
arm64: dts: ti: k3-j784s4-evm: Add support for multiple CAN instances arm64: dts: ti: k3-j784s4-evm: Add support for multiple CAN instances - - - --- 2024-04-11 Bhavya Kapoor New
[v3,4/4] arm64: dts: ti: k3-j784s4-evm: Remove Pinmux for CTS and RTS in wkup_uart0 arm64: dts: ti: Modify pinmux for wkup_uart0 and mcu_uart0 - - - --- 2024-02-14 Bhavya Kapoor New
[v3,3/4] arm64: dts: ti: k3-j721s2-common-proc-board: Remove Pinmux for CTS and RTS in wkup_uart0 arm64: dts: ti: Modify pinmux for wkup_uart0 and mcu_uart0 - - - --- 2024-02-14 Bhavya Kapoor New
[v3,2/4] arm64: dts: ti: k3-j7200-common-proc-board: Remove clock-frequency from mcu_uart0 arm64: dts: ti: Modify pinmux for wkup_uart0 and mcu_uart0 - - - --- 2024-02-14 Bhavya Kapoor New
[v3,1/4] arm64: dts: ti: k3-j7200-common-proc-board: Modify Pinmux for wkup_uart0 and mcu_uart0 arm64: dts: ti: Modify pinmux for wkup_uart0 and mcu_uart0 - - - --- 2024-02-14 Bhavya Kapoor New
[RESEND,v2,4/4] arm64: dts: ti: k3-j784s4-evm: Remove Pinmux for CTS and RTS in wkup_uart0 arm64: dts: ti: Modify pinmux for wkup_uart0 and mcu_uart0 - - - --- 2024-02-12 Bhavya Kapoor New
[RESEND,v2,3/4] arm64: dts: ti: k3-j721s2-common-proc-board: Remove Pinmux for CTS and RTS in wkup_… arm64: dts: ti: Modify pinmux for wkup_uart0 and mcu_uart0 - - - --- 2024-02-12 Bhavya Kapoor New
[RESEND,v2,2/4] arm64: dts: ti: k3-j7200-common-proc-board: Remove clock-frequency from mcu_uart0 arm64: dts: ti: Modify pinmux for wkup_uart0 and mcu_uart0 - - - --- 2024-02-12 Bhavya Kapoor New
[RESEND,v2,1/4] arm64: dts: ti: k3-j7200-common-proc-board: Modify Pinmux for wkup_uart0 and mcu_ua… arm64: dts: ti: Modify pinmux for wkup_uart0 and mcu_uart0 - - - --- 2024-02-12 Bhavya Kapoor New
[4/4] arm64: dts: ti: k3-j784s4-evm: Remove Pinmux for CTS and RTS in wkup_uart0 arm64: dts: ti: Modify pinmux for wkup_uart0 and mcu_uart0 - - - --- 2024-02-12 Bhavya Kapoor New
[3/4] arm64: dts: ti: k3-j721s2-common-proc-board: Remove Pinmux for CTS and RTS in wkup_uart0 arm64: dts: ti: Modify pinmux for wkup_uart0 and mcu_uart0 - - - --- 2024-02-12 Bhavya Kapoor New
[2/4] arm64: dts: ti: k3-j7200-common-proc-board: Remove clock-frequency from mcu_uart0 arm64: dts: ti: Modify pinmux for wkup_uart0 and mcu_uart0 - - - --- 2024-02-12 Bhavya Kapoor New
[1/4] arm64: dts: ti: k3-j7200-common-proc-board: Modify Pinmux for wkup_uart0 and mcu_uart0 arm64: dts: ti: Modify pinmux for wkup_uart0 and mcu_uart0 - - - --- 2024-02-12 Bhavya Kapoor New
[3/3] arm64: dts: ti: k3-j784s4-evm: Remove Pinmux for CTS and RTS in Wakeup Uart arm64: dts: ti: Modify pinmux for wakeup and mcu uart - - - --- 2024-02-08 Bhavya Kapoor New
[2/3] arm64: dts: ti: k3-j721s2-common-proc-board: Remove Pinmux for CTS and RTS in Wakeup Uart arm64: dts: ti: Modify pinmux for wakeup and mcu uart - - - --- 2024-02-08 Bhavya Kapoor New
[1/3] arm64: dts: ti: k3-j7200-common-proc-board: Modify Pinmux for wakeup and mcu uart arm64: dts: ti: Modify pinmux for wakeup and mcu uart - - - --- 2024-02-08 Bhavya Kapoor New
[3/3] arm64: dts: ti: k3-j7200: Add support for multiple CAN instances arm64: dts: ti: k3-j7200: Add support for multiple CAN nodes in J7200 - - - --- 2024-01-30 Bhavya Kapoor New
[2/3] arm64: dts: ti: k3-j7200-som-p0: Add support for CAN instance 0 in main domain arm64: dts: ti: k3-j7200: Add support for multiple CAN nodes in J7200 - - - --- 2024-01-30 Bhavya Kapoor New
[1/3] arm64: dts: ti: k3-j7200: Add support for CAN nodes arm64: dts: ti: k3-j7200: Add support for multiple CAN nodes in J7200 - - - --- 2024-01-30 Bhavya Kapoor New
[3/3] arm64: dts: ti: k3-j784s4-main: Add Itap Delay Value For DDR50 speed mode arm64: dts: ti: Add Itap Delay Value For High Speed DDR - 1 - --- 2023-12-01 Bhavya Kapoor New
[2/3] arm64: dts: ti: k3-j721s2-main: Add Itap Delay Value For DDR50 speed mode arm64: dts: ti: Add Itap Delay Value For High Speed DDR - 1 - --- 2023-12-01 Bhavya Kapoor New
[1/3] arm64: dts: ti: k3-j7200-main: Add Itap Delay Value For DDR52 speed mode arm64: dts: ti: Add Itap Delay Value For High Speed DDR - 1 - --- 2023-12-01 Bhavya Kapoor New
[v3] arm64: dts: ti: k3-j721s2-main: Enable support for SDR104 speed mode [v3] arm64: dts: ti: k3-j721s2-main: Enable support for SDR104 speed mode - 1 - --- 2023-09-20 Bhavya Kapoor New
[v2] arm64: dts: ti: k3-j784s4-evm: Add support for MCAN interfaces [v2] arm64: dts: ti: k3-j784s4-evm: Add support for MCAN interfaces - - - --- 2023-08-17 Bhavya Kapoor New
arm64: dts: ti: k3-j784s4-evm: Add support for MCAN interfaces arm64: dts: ti: k3-j784s4-evm: Add support for MCAN interfaces - - - --- 2023-08-16 Bhavya Kapoor New
[v4] arm64: dts: ti: k3-j721s2: Add support for CAN instances 3 and 5 in main domain [v4] arm64: dts: ti: k3-j721s2: Add support for CAN instances 3 and 5 in main domain - 1 - --- 2023-06-22 Bhavya Kapoor New
[v3] arm64: dts: ti: k3-j721s2: Add support for CAN instances 3 and 5 in main domain [v3] arm64: dts: ti: k3-j721s2: Add support for CAN instances 3 and 5 in main domain - 1 - --- 2023-05-26 Bhavya Kapoor New
[tiL6.1,v2] arm64: dts: ti: k3-j721s2: Add support for CAN instances 3 and 5 in main domain [tiL6.1,v2] arm64: dts: ti: k3-j721s2: Add support for CAN instances 3 and 5 in main domain - - - --- 2023-05-23 Bhavya Kapoor New
arm64: dts: ti: k3-j784s4-main: Enable support for high speed modes arm64: dts: ti: k3-j784s4-main: Enable support for high speed modes - 1 - --- 2023-05-02 Bhavya Kapoor New
[v2,2/2] arm64: dts: ti: k3-j784s4-evm: Add pinmux information for ADC arm64: dts: ti: k3-j784s4: Add support for ADC nodes - - - --- 2023-05-02 Bhavya Kapoor New
[v2,1/2] arm64: dts: ti: k3-j784s4-mcu-wakeup: Add support for ADC nodes arm64: dts: ti: k3-j784s4: Add support for ADC nodes - - - --- 2023-05-02 Bhavya Kapoor New
arm64: dts: ti: k3-j721e-main: Update delay select values for MMC subsystems arm64: dts: ti: k3-j721e-main: Update delay select values for MMC subsystems - - - --- 2023-04-24 Bhavya Kapoor New
[v2] arm64: dts: ti: k3-j721s2-main: Enable support for SDR104 speed mode [v2] arm64: dts: ti: k3-j721s2-main: Enable support for SDR104 speed mode - 1 - --- 2023-04-12 Bhavya Kapoor New
[2/2] arm64: dts: ti: k3-j784s4-evm: Add pinmux information for ADC arm64: dts: ti: k3-j784s4: Add support for ADC nodes - - - --- 2023-04-12 Bhavya Kapoor New
[1/2] arm64: dts: ti: k3-j784s4-mcu-wakeup: Add support for ADC nodes arm64: dts: ti: k3-j784s4: Add support for ADC nodes - - - --- 2023-04-12 Bhavya Kapoor New
arm64: dts: ti: k3-j721s2: Add support for CAN instances 3 and 5 in main domain arm64: dts: ti: k3-j721s2: Add support for CAN instances 3 and 5 in main domain - - - --- 2023-04-12 Bhavya Kapoor New
[2/2] arm64: defconfig: Enable TI ADC driver arm64: defconfig: Enable TI TSCADC and ADC drivers - 1 - --- 2023-04-11 Bhavya Kapoor New
[1/2] arm64: defconfig: Enable TI TSCADC driver arm64: defconfig: Enable TI TSCADC and ADC drivers - - - --- 2023-04-11 Bhavya Kapoor New
arm64: dts: ti: k3-j721s2-main: Enable support for SDR104 speed mode arm64: dts: ti: k3-j721s2-main: Enable support for SDR104 speed mode - - - --- 2023-04-04 Bhavya Kapoor New
[v3] arm64: defconfig: Enable CAN PHY transceiver driver [v3] arm64: defconfig: Enable CAN PHY transceiver driver - 2 - --- 2023-03-24 Bhavya Kapoor New
[v2] arm64: defconfig: Enable CAN PHY transceiver driver [v2] arm64: defconfig: Enable CAN PHY transceiver driver - 1 - --- 2023-03-23 Bhavya Kapoor New
arm64: defconfig: Enable CAN PHY transceiver driver arm64: defconfig: Enable CAN PHY transceiver driver - - - --- 2023-03-23 Bhavya Kapoor New
[v7,2/2] arm64: dts: ti: k3-j721s2-common-proc-board: Add pinmux information for ADC arm64: dts: ti: k3-j721s2: Add support for ADC nodes - - - --- 2023-03-16 Bhavya Kapoor New
[v7,1/2] arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support for ADC nodes arm64: dts: ti: k3-j721s2: Add support for ADC nodes - - - --- 2023-03-16 Bhavya Kapoor New
[v6] arm64: dts: ti: k3-j721s2: Add support for ADC nodes [v6] arm64: dts: ti: k3-j721s2: Add support for ADC nodes - - - --- 2023-03-14 Bhavya Kapoor New
[v4] arm64: dts: ti: k3-j721s2: Add support for ADC nodes [v4] arm64: dts: ti: k3-j721s2: Add support for ADC nodes - - - --- 2023-03-13 Bhavya Kapoor New
[v3] arm64: dts: ti: k3-j721e-main: Remove ti,strobe-sel property [v3] arm64: dts: ti: k3-j721e-main: Remove ti,strobe-sel property - 1 - --- 2023-02-03 Bhavya Kapoor New
[v3] arm64: dts: ti: k3-j721s2: Add support for ADC nodes [v3] arm64: dts: ti: k3-j721s2: Add support for ADC nodes - - - --- 2022-12-23 Bhavya Kapoor New
[v2] arm64: dts: ti: k3-j721s2: Add support for ADC nodes [v2] arm64: dts: ti: k3-j721s2: Add support for ADC nodes - - - --- 2022-12-21 Bhavya Kapoor New
arm64: dts: ti: k3-j721s2: Add support for ADC nodes arm64: dts: ti: k3-j721s2: Add support for ADC nodes - - - --- 2022-12-20 Bhavya Kapoor New
[v2] arm64: dts: ti: k3-j721e-main: Remove ti,strobe-sel property [v2] arm64: dts: ti: k3-j721e-main: Remove ti,strobe-sel property - - - --- 2022-11-16 Bhavya Kapoor New
arm64: dts: ti: k3-j721s2: Add support for ADC nodes arm64: dts: ti: k3-j721s2: Add support for ADC nodes - - - --- 2022-11-08 Bhavya Kapoor New
arm64: dts: ti: k3-j721s2: Add support for ADC nodes arm64: dts: ti: k3-j721s2: Add support for ADC nodes - - - --- 2022-11-08 Bhavya Kapoor New
arm64: dts: ti: k3-j721e-main: Remove ti,strobe-sel property arm64: dts: ti: k3-j721e-main: Remove ti,strobe-sel property - - - --- 2022-11-07 Bhavya Kapoor New
[uL] arm64: dts: ti: k3-j721e-mcu-wakeup: Modified fss compatible to syscon and simple-mfd [uL] arm64: dts: ti: k3-j721e-mcu-wakeup: Modified fss compatible to syscon and simple-mfd - - - --- 2022-05-30 Bhavya Kapoor New