Show patches with: Submitter = Chao Xie       |    State = Action Required       |   273 patches
« 1 2 3 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[RESEND,3/3] clk: mmp: add timer clock for pxa168/mmp2/pxa910 - - - --- 2015-04-30 Chao Xie New
[RESEND,2/3] clk: mmp: Fix the wrong factor table for uart PLL - - - --- 2015-04-30 Chao Xie New
[RESEND,1/3] clk: mmp: add fixed clock UBS_PLL for pxa910/pxa168 - - - --- 2015-04-30 Chao Xie New
[V2,13/13] arm: mmp: Make use of the DT supported clock - - - --- 2014-10-31 Chao Xie New
[V2,12/13] arm: mmp: Make all the dts file to be compiled by Makefile - - - --- 2014-10-31 Chao Xie New
[V2,11/13] clk: mmp: add mmp2 DT support for clock driver - - - --- 2014-10-31 Chao Xie New
[V2,10/13] clk: mmp: add pxa910 DT support for clock driver - - - --- 2014-10-31 Chao Xie New
[V2,09/13] clk: mmp: add pxa168 DT support for clock driver - - - --- 2014-10-31 Chao Xie New
[V2,08/13] clk: mmp: add reset support - - - --- 2014-10-31 Chao Xie New
[V2,07/13] clk: mmp: add basic support functions for DT support - - - --- 2014-10-31 Chao Xie New
[V2,06/13] clk: mmp: add mmp private gate clock - - - --- 2014-10-31 Chao Xie New
[V2,05/13] clk: mmp: add clock type mix - - - --- 2014-10-31 Chao Xie New
[V2,04/13] clk: mmp: move definiton of mmp_clk_frac to clk.h - - - --- 2014-10-31 Chao Xie New
[V2,03/13] clk: mmp: add init callback for clk-frac - - - --- 2014-10-31 Chao Xie New
[V2,02/13] clk: mmp: add spin lock for clk-frac - - - --- 2014-10-31 Chao Xie New
[V2,01/13] clk: mmp: add prefix "mmp" for structures defined for clk-frac - - - --- 2014-10-31 Chao Xie New
[12/12] arm: mmp: Make use of the DT supported clock - - - --- 2014-08-26 Chao Xie New
[11/12] arm: mmp: Make all the dts file to be compiled by Makefile - - - --- 2014-08-26 Chao Xie New
[10/12] clk: mmp: add mmp2 DT support for clock driver - - - --- 2014-08-26 Chao Xie New
[09/12] clk: mmp: add pxa910 DT support for clock driver - - - --- 2014-08-26 Chao Xie New
[08/12] clk: mmp: add pxa168 DT support for clock driver - - - --- 2014-08-26 Chao Xie New
[07/12] clk: mmp: add basic support functions for DT support - - - --- 2014-08-26 Chao Xie New
[06/12] clk: mmp: add mmp private gate clock - - - --- 2014-08-26 Chao Xie New
[05/12] clk: mmp: add clock type mix - - - --- 2014-08-26 Chao Xie New
[04/12] clk: mmp: move definiton of mmp_clk_frac to clk.h - - - --- 2014-08-26 Chao Xie New
[03/12] clk: mmp: add init callback for clk-frac - - - --- 2014-08-26 Chao Xie New
[02/12] clk: mmp: add spin lock for clk-frac - - - --- 2014-08-26 Chao Xie New
[01/12] clk: mmp: add prefix "mmp" for structures defined for clk-frac - - - --- 2014-08-26 Chao Xie New
[12/12] arm: mmp: support clock device tree for mmp platforms - - - --- 2014-06-10 Chao Xie New
[11/12] clk: mmp: add device tree support for clocks. - - - --- 2014-06-10 Chao Xie New
[10/12] clk: mmp: add device tree support for composite type clock - - - --- 2014-06-10 Chao Xie New
[09/12] clk: mmp: add spin lock automatic detection from device tree - - - --- 2014-06-10 Chao Xie New
[08/12] clk: mmp: add clock type master - - - --- 2014-06-10 Chao Xie New
[07/12] clk: mmp: add clock type composite for mix - - - --- 2014-06-10 Chao Xie New
[06/12] clk: mmp: add mmp private gate clock - - - --- 2014-06-10 Chao Xie New
[05/12] clk: mmp: add clock type mix - - - --- 2014-06-10 Chao Xie New
[04/12] clk: mmp: move definiton of mmp_clk_frac to clk.h - - - --- 2014-06-10 Chao Xie New
[03/12] clk: mmp: add init callback for clk-frac - - - --- 2014-06-10 Chao Xie New
[02/12] clk: mmp: add spin lock for clk-frac - - - --- 2014-06-10 Chao Xie New
[01/12] clk: mmp: add prefix "mmp" for structures defined for clk-frac - - - --- 2014-06-10 Chao Xie New
[V2,4/4] arm: mmp: remove the old timer driver - - - --- 2014-04-17 Chao Xie New
[V2,3/4] arm: mmp: make SOCes with DT use new timer driver - - - --- 2014-04-17 Chao Xie New
[V2,2/4] arm: mmp: make SOCes without DT use new timer driver - - - --- 2014-04-17 Chao Xie New
[V2,1/4] clocksource: mmp: add mmp timer driver - - - --- 2014-04-17 Chao Xie New
[4/4] arm: mmp: remove the old timer driver - - - --- 2014-03-26 Chao Xie New
[3/4] arm: mmp: make SOCes with DT use new timer driver - - - --- 2014-03-26 Chao Xie New
[2/4] arm: mmp: make SOCes without DT use new timer driver - - - --- 2014-03-26 Chao Xie New
[1/4] clocksource: mmp: add mmp timer driver - - - --- 2014-03-26 Chao Xie New
[2/2] ARM: PJ4: check cpu id for PJ4 cp0 access - - - --- 2014-03-21 Chao Xie New
[1/2] ARM: add cpu_is_pj4() to distinguish PJ4 core - - - --- 2014-03-21 Chao Xie New
pinctrl: single: add low powr mode support - - - --- 2014-01-28 Chao Xie New
input: pxa27x-keypad: bug fix of getting scan code - - - --- 2014-01-27 Chao Xie New
dma: mmp_pdma: add IRQF_SHARED when request irq - - - --- 2014-01-27 Chao Xie New
[3/3] clk: mmp: try to use closer one when do round rate - - - --- 2014-01-23 Chao Xie New
[2/3] clk: mmp: fix the wrong calculation formula - - - --- 2014-01-23 Chao Xie New
[1/3] clk: mmp: fix wrong mask when calculate denominator - - - --- 2014-01-23 Chao Xie New
[V2] USB: initialize or shutdown PHY when add or remove host controller - - - --- 2013-06-19 Chao Xie New
USB: initialize or shutdown PHY when add or remove host controller - - - --- 2013-06-18 Chao Xie New
[V3,5/5] input: pxa27x-keypad: add device tree support - - - --- 2013-06-18 Chao Xie New
[V3,4/5] input: pxa27x-keypad: remove the unused members at platform data - - - --- 2013-06-18 Chao Xie New
[V3,3/5] arm: pxa: use matrix_keymap for all boards - - - --- 2013-06-18 Chao Xie New
[V3,2/5] arm: mmp: use matrix_keymap for all boards - - - --- 2013-06-18 Chao Xie New
[V3,1/5] input: pxa27x-keypad: use matrix_keymap for matrix keyes - - - --- 2013-06-18 Chao Xie New
[V2] arm: pj4: check cpu id for pj4 cp0 access - - - --- 2013-06-14 Chao Xie New
arm: pj4: check cpu id for pj4 cp0 access - - - --- 2013-06-14 Chao Xie New
[V10,12/12] usb: mv_usb: remove the phy callbacks in pdata - - - --- 2013-05-13 Chao Xie New
[V10,11/12] arm: brownstone: add usb support for the board - - - --- 2013-05-13 Chao Xie New
[V10,10/12] arm: mmp: remove unused usb devices - - - --- 2013-05-13 Chao Xie New
[V10,09/12] arm: ttc_dkb: modify usb support - - - --- 2013-05-13 Chao Xie New
[V10,08/12] arm: pxa910: change the defintion of usb devices - - - --- 2013-05-13 Chao Xie New
[V10,07/12] arm: mmp2: change the defintion of usb devices - - - --- 2013-05-13 Chao Xie New
[V10,06/12] usb: mv_u3d: usb phy drivers for phy operation - - - --- 2013-05-13 Chao Xie New
[V10,05/12] usb: phy: phy-mv-usb: use USB2 PHY driver for otg - - - --- 2013-05-13 Chao Xie New
[V10,04/12] usb: ehci: ehci-mv: use PHY driver for ehci - - - --- 2013-05-13 Chao Xie New
[V10,03/12] usb: gadget: mv_udc: use PHY driver for udc - - - --- 2013-05-13 Chao Xie New
[V10,02/12] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller - - - --- 2013-05-13 Chao Xie New
[V10,01/12] usb: phy: protect phy init and shutdown for mutiple deivces - - - --- 2013-05-13 Chao Xie New
[V9,12/12] usb: mv_usb: remove the phy callbacks in pdata - - - --- 2013-04-24 Chao Xie New
[V9,11/12] arm: brownstone: add usb support for the board - - - --- 2013-04-24 Chao Xie New
[V9,10/12] arm: mmp: remove unused usb devices - - - --- 2013-04-24 Chao Xie New
[V9,09/12] arm: ttc_dkb: modify usb support - - - --- 2013-04-24 Chao Xie New
[V9,08/12] arm: pxa910: change the defintion of usb devices - - - --- 2013-04-24 Chao Xie New
[V9,07/12] arm: mmp2: change the defintion of usb devices - - - --- 2013-04-24 Chao Xie New
[V9,06/12] usb: mv_u3d: usb phy drivers for phy operation - - - --- 2013-04-24 Chao Xie New
[V9,05/12] usb: phy: phy-mv-usb: use USB2 PHY driver for otg - - - --- 2013-04-24 Chao Xie New
[V9,04/12] usb: ehci: ehci-mv: use PHY driver for ehci - - - --- 2013-04-24 Chao Xie New
[V9,03/12] usb: gadget: mv_udc: use PHY driver for udc - - - --- 2013-04-24 Chao Xie New
[V9,02/12] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller - - - --- 2013-04-24 Chao Xie New
[V9,01/12] usb: phy: protect phy init and shutdown for mutiple deivces - - - --- 2013-04-24 Chao Xie New
[V9,12/12] usb: mv_usb: remove the phy callbacks in pdata - - - --- 2013-04-07 Chao Xie New
[V9,11/12] arm: brownstone: add usb support for the board - - - --- 2013-04-07 Chao Xie New
[V9,10/12] arm: mmp: remove unused usb devices - - - --- 2013-04-07 Chao Xie New
[V9,09/12] arm: ttc_dkb: modify usb support - - - --- 2013-04-07 Chao Xie New
[V9,08/12] arm: pxa910: change the defintion of usb devices - - - --- 2013-04-07 Chao Xie New
[V9,07/12] arm: mmp2: change the defintion of usb devices - - - --- 2013-04-07 Chao Xie New
[V9,06/12] usb: mv_u3d: usb phy drivers for phy operation - - - --- 2013-04-07 Chao Xie New
[V9,05/12] usb: phy: phy-mv-usb: use USB2 PHY driver for otg - - - --- 2013-04-07 Chao Xie New
[V9,04/12] usb: ehci: ehci-mv: use PHY driver for ehci - - - --- 2013-04-07 Chao Xie New
[V9,03/12] usb: gadget: mv_udc: use PHY driver for udc - - - --- 2013-04-07 Chao Xie New
[V9,02/12] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller - - - --- 2013-04-07 Chao Xie New
« 1 2 3 »