diff mbox series

[v3,23/25] iommu: Merge strictness and domain type configs

Message ID 18f2757675b1a4d74d052b2b211e512ebf6e465e.1628094601.git.robin.murphy@arm.com (mailing list archive)
State New, archived
Headers show
Series iommu: Refactor DMA domain strictness | expand

Commit Message

Robin Murphy Aug. 4, 2021, 5:15 p.m. UTC
To parallel the sysfs behaviour, merge the new build-time option
for DMA domain strictness into the default domain type choice.

Suggested-by: Joerg Roedel <joro@8bytes.org>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>

---

v3: Remember to update parameter documentation as well
---
 .../admin-guide/kernel-parameters.txt         |  8 +-
 drivers/iommu/Kconfig                         | 80 +++++++++----------
 drivers/iommu/iommu.c                         |  2 +-
 3 files changed, 44 insertions(+), 46 deletions(-)

Comments

John Garry Aug. 6, 2021, 9:15 a.m. UTC | #1
On 04/08/2021 18:15, Robin Murphy wrote:
> To parallel the sysfs behaviour, merge the new build-time option
> for DMA domain strictness into the default domain type choice.
> 
> Suggested-by: Joerg Roedel<joro@8bytes.org>
> Reviewed-by: Lu Baolu<baolu.lu@linux.intel.com>
> Reviewed-by: Jean-Philippe Brucker<jean-philippe@linaro.org>
> Signed-off-by: Robin Murphy<robin.murphy@arm.com>

Reviewed-by: John Garry <john.garry@huawei.com>
diff mbox series

Patch

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 90b525cf0ec2..19192b39952a 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -2045,11 +2045,9 @@ 
 			1 - Strict mode.
 			  DMA unmap operations invalidate IOMMU hardware TLBs
 			  synchronously.
-			unset - Use value of CONFIG_IOMMU_DEFAULT_{LAZY,STRICT}.
-			Note: on x86, the default behaviour depends on the
-			equivalent driver-specific parameters, but a strict
-			mode explicitly specified by either method takes
-			precedence.
+			unset - Use value of CONFIG_IOMMU_DEFAULT_DMA_{LAZY,STRICT}.
+			Note: on x86, strict mode specified via one of the
+			legacy driver-specific options takes precedence.
 
 	iommu.passthrough=
 			[ARM64, X86] Configure DMA to bypass the IOMMU by default.
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index c84da8205be7..6e06f876d75a 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -79,55 +79,55 @@  config IOMMU_DEBUGFS
 	  debug/iommu directory, and then populate a subdirectory with
 	  entries as required.
 
-config IOMMU_DEFAULT_PASSTHROUGH
-	bool "IOMMU passthrough by default"
-	depends on IOMMU_API
-	help
-	  Enable passthrough by default, removing the need to pass in
-	  iommu.passthrough=on or iommu=pt through command line. If this
-	  is enabled, you can still disable with iommu.passthrough=off
-	  or iommu=nopt depending on the architecture.
-
-	  If unsure, say N here.
-
 choice
-	prompt "IOMMU default DMA IOTLB invalidation mode"
-	depends on IOMMU_DMA
-
-	default IOMMU_DEFAULT_LAZY if (AMD_IOMMU || INTEL_IOMMU)
-	default IOMMU_DEFAULT_STRICT
+	prompt "IOMMU default domain type"
+	depends on IOMMU_API
+	default IOMMU_DEFAULT_DMA_LAZY if AMD_IOMMU || INTEL_IOMMU
+	default IOMMU_DEFAULT_DMA_STRICT
 	help
-	  This option allows an IOMMU DMA IOTLB invalidation mode to be
-	  chosen at build time, to override the default mode of each ARCH,
-	  removing the need to pass in kernel parameters through command line.
-	  It is still possible to provide common boot params to override this
-	  config.
+	  Choose the type of IOMMU domain used to manage DMA API usage by
+	  device drivers. The options here typically represent different
+	  levels of tradeoff between robustness/security and performance,
+	  depending on the IOMMU driver. Not all IOMMUs support all options.
+	  This choice can be overridden at boot via the command line, and for
+	  some devices also at runtime via sysfs.
 
 	  If unsure, keep the default.
 
-config IOMMU_DEFAULT_STRICT
-	bool "strict"
+config IOMMU_DEFAULT_DMA_STRICT
+	bool "Translated - Strict"
 	help
-	  For every IOMMU DMA unmap operation, the flush operation of IOTLB and
-	  the free operation of IOVA are guaranteed to be done in the unmap
-	  function.
+	  Trusted devices use translation to restrict their access to only
+	  DMA-mapped pages, with strict TLB invalidation on unmap. Equivalent
+	  to passing "iommu.passthrough=0 iommu.strict=1" on the command line.
 
-config IOMMU_DEFAULT_LAZY
-	bool "lazy"
+	  Untrusted devices always use this mode, with an additional layer of
+	  bounce-buffering such that they cannot gain access to any unrelated
+	  data within a mapped page.
+
+config IOMMU_DEFAULT_DMA_LAZY
+	bool "Translated - Lazy"
 	help
-	  Support lazy mode, where for every IOMMU DMA unmap operation, the
-	  flush operation of IOTLB and the free operation of IOVA are deferred.
-	  They are only guaranteed to be done before the related IOVA will be
-	  reused.
+	  Trusted devices use translation to restrict their access to only
+	  DMA-mapped pages, but with "lazy" batched TLB invalidation. This
+	  mode allows higher performance with some IOMMUs due to reduced TLB
+	  flushing, but at the cost of reduced isolation since devices may be
+	  able to access memory for some time after it has been unmapped.
+	  Equivalent to passing "iommu.passthrough=0 iommu.strict=0" on the
+	  command line.
 
-	  The isolation provided in this mode is not as secure as STRICT mode,
-	  such that a vulnerable time window may be created between the DMA
-	  unmap and the mappings cached in the IOMMU IOTLB or device TLB
-	  finally being invalidated, where the device could still access the
-	  memory which has already been unmapped by the device driver.
-	  However this mode may provide better performance in high throughput
-	  scenarios, and is still considerably more secure than passthrough
-	  mode or no IOMMU.
+	  If this mode is not supported by the IOMMU driver, the effective
+	  runtime default will fall back to IOMMU_DEFAULT_DMA_STRICT.
+
+config IOMMU_DEFAULT_PASSTHROUGH
+	bool "Passthrough"
+	help
+	  Trusted devices are identity-mapped, giving them unrestricted access
+	  to memory with minimal performance overhead. Equivalent to passing
+	  "iommu.passthrough=1" (historically "iommu=pt") on the command line.
+
+	  If this mode is not supported by the IOMMU driver, the effective
+	  runtime default will fall back to IOMMU_DEFAULT_DMA_STRICT.
 
 endchoice
 
diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index 63face36fc49..480ad6a538a9 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -31,7 +31,7 @@  static struct kset *iommu_group_kset;
 static DEFINE_IDA(iommu_group_ida);
 
 static unsigned int iommu_def_domain_type __read_mostly;
-static bool iommu_dma_strict __read_mostly = IS_ENABLED(CONFIG_IOMMU_DEFAULT_STRICT);
+static bool iommu_dma_strict __read_mostly = IS_ENABLED(CONFIG_IOMMU_DEFAULT_DMA_STRICT);
 static u32 iommu_cmd_line __read_mostly;
 
 struct iommu_group {