@@ -260,6 +260,75 @@ static const struct mtd_ooblayout_ops spinand_noecc_ooblayout = {
.free = spinand_noecc_ooblayout_free,
};
+static int spinand_ondie_ecc_init_ctx(struct nand_device *nand)
+{
+ struct spinand_device *spinand = nand_to_spinand(nand);
+ struct mtd_info *mtd = nanddev_to_mtd(nand);
+ struct spinand_ondie_ecc_conf *engine_conf;
+
+ nand->ecc.ctx.conf.provider = NAND_ECC_ON_DIE;
+ nand->ecc.ctx.conf.step_size = nand->ecc.requirements.step_size;
+ nand->ecc.ctx.conf.strength = nand->ecc.requirements.strength;
+
+ engine_conf = kzalloc(sizeof(*engine_conf), GFP_KERNEL);
+ if (!engine_conf)
+ return -ENOMEM;
+
+ nand->ecc.ctx.priv = engine_conf;
+
+ if (spinand->eccinfo.ooblayout)
+ mtd_set_ooblayout(mtd, spinand->eccinfo.ooblayout);
+ else
+ mtd_set_ooblayout(mtd, &spinand_noecc_ooblayout);
+
+ return 0;
+}
+
+static void spinand_ondie_ecc_cleanup_ctx(struct nand_device *nand)
+{
+ kfree(nand->ecc.ctx.priv);
+}
+
+static int spinand_ondie_ecc_prepare_io_req(struct nand_device *nand,
+ struct nand_page_io_req *req,
+ void *oobbuf)
+{
+ struct spinand_device *spinand = nand_to_spinand(nand);
+ bool enable = (req->mode != MTD_OPS_RAW);
+
+ /* Only enable or disable the engine */
+ return spinand_ecc_enable(spinand, enable);
+}
+
+static int spinand_ondie_ecc_finish_io_req(struct nand_device *nand,
+ struct nand_page_io_req *req,
+ void *oobbuf)
+{
+ struct spinand_ondie_ecc_conf *engine_conf = nand->ecc.ctx.priv;
+ struct spinand_device *spinand = nand_to_spinand(nand);
+
+ if (req->mode == MTD_OPS_RAW)
+ return 0;
+
+ /* Nothing to do when finishing a page write */
+ if (req->type == NAND_PAGE_WRITE)
+ return 0;
+
+ /* Finish a page write: check the status, report errors/bitflips */
+ return spinand_check_ecc_status(spinand, engine_conf->status);
+}
+
+static struct nand_ecc_engine_ops spinand_ondie_ecc_engine_ops = {
+ .init_ctx = spinand_ondie_ecc_init_ctx,
+ .cleanup_ctx = spinand_ondie_ecc_cleanup_ctx,
+ .prepare_io_req = spinand_ondie_ecc_prepare_io_req,
+ .finish_io_req = spinand_ondie_ecc_finish_io_req,
+};
+
+static __maybe_unused struct nand_ecc_engine spinand_ondie_ecc_engine = {
+ .ops = &spinand_ondie_ecc_engine_ops,
+};
+
static int spinand_write_enable_op(struct spinand_device *spinand)
{
struct spi_mem_op op = SPINAND_WR_EN_DIS_OP(true);
@@ -240,6 +240,15 @@ struct spinand_ecc_info {
#define SPINAND_HAS_QE_BIT BIT(0)
+/**
+ * struct spinand_ondie_ecc_conf - private SPI-NAND on-die ECC engine structure
+ * @status: status of the last wait operation that will be used in case
+ * ->get_status() is not populated by the spinand device.
+ */
+struct spinand_ondie_ecc_conf {
+ u8 status;
+};
+
/**
* struct spinand_info - Structure used to describe SPI NAND chips
* @model: model name
Make use of the existing functions taken from the SPI-NAND core to instantiate an on-die ECC engine specific to the SPI-NAND core. The next step will be to tweak the core to use this object instead of calling the helpers directly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- drivers/mtd/nand/spi/core.c | 69 +++++++++++++++++++++++++++++++++++++ include/linux/mtd/spinand.h | 9 +++++ 2 files changed, 78 insertions(+)