diff mbox series

[1/6] ARM: dts: imx6qdl: Enable SNVS power key according to board design

Message ID 20190613033527.40555-1-Anson.Huang@nxp.com (mailing list archive)
State New, archived
Headers show
Series [1/6] ARM: dts: imx6qdl: Enable SNVS power key according to board design | expand

Commit Message

Anson Huang June 13, 2019, 3:35 a.m. UTC 
From: Anson Huang <Anson.Huang@nxp.com>

The SNVS power key depends on board design, by default it should
be disabled in SoC DT and ONLY be enabled on board DT if it is
wired up.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
 arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 4 ++++
 arch/arm/boot/dts/imx6qdl.dtsi         | 1 +
 2 files changed, 5 insertions(+)

Comments

Shawn Guo June 18, 2019, 7:15 a.m. UTC | #1 
On Thu, Jun 13, 2019 at 11:35:22AM +0800, Anson.Huang@nxp.com wrote:
> From: Anson Huang <Anson.Huang@nxp.com>
> 
> The SNVS power key depends on board design, by default it should
> be disabled in SoC DT and ONLY be enabled on board DT if it is
> wired up.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

Applied all, thanks.
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 11103a4..71ca76a 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -761,6 +761,10 @@ 
 	status = "okay";
 };
 
+&snvs_pwrkey {
+	status = "okay";
+};
+
 &ssi2 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 929fc7d..4b80193 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -841,6 +841,7 @@ 
 					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 					linux,keycode = <KEY_POWER>;
 					wakeup-source;
+					status = "disabled";
 				};
 
 				snvs_lpgpr: snvs-lpgpr {