diff mbox series

[3/6] ARM: dts: imx6ul: Enable SNVS power key according to board design

Message ID 20190613033527.40555-3-Anson.Huang@nxp.com (mailing list archive)
State New, archived
Headers show
Series [1/6] ARM: dts: imx6qdl: Enable SNVS power key according to board design | expand

Commit Message

Anson Huang June 13, 2019, 3:35 a.m. UTC 
From: Anson Huang <Anson.Huang@nxp.com>

The SNVS power key depends on board design, by default it should
be disabled in SoC DT and ONLY be enabled on board DT if it is
wired up.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
 arch/arm/boot/dts/imx6ul-14x14-evk.dtsi | 4 ++++
 arch/arm/boot/dts/imx6ul.dtsi           | 1 +
 2 files changed, 5 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
index 9207d5d..cbe61b6 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
@@ -238,6 +238,10 @@ 
 	status = "okay";
 };
 
+&snvs_pwrkey {
+	status = "okay";
+};
+
 &tsc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_tsc>;
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index fc388b8..0c51439 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -650,6 +650,7 @@ 
 					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 					linux,keycode = <KEY_POWER>;
 					wakeup-source;
+					status = "disabled";
 				};
 
 				snvs_lpgpr: snvs-lpgpr {