[v1,28/50] ARM: dts: exynos: change OPPs for g2d and g2d_acp buses in Exynos5420

Commit Message

Lukasz Luba July 15, 2019, 12:43 p.m. UTC

Align the frequencies in OPPs to values which are possible to set using
a divider and parent clock rate. Keep the OPP number in the table equal
or less to the number in bus_wcore (any higher OPPs would not be set).

Signed-off-by: Lukasz Luba <[e-mail]>
---
 arch/arm/boot/dts/exynos5420.dtsi | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

Patch

diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index a355c76af5a5..3a128cd717e2 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -1216,7 +1216,7 @@ 
 			compatible = "operating-points-v2";
 
 			opp00 {
-				opp-hz = /bits/ 64 <84000000>;
+				opp-hz = /bits/ 64 <110000000>;
 			};
 			opp01 {
 				opp-hz = /bits/ 64 <167000000>;
@@ -1225,9 +1225,6 @@ 
 				opp-hz = /bits/ 64 <222000000>;
 			};
 			opp03 {
-				opp-hz = /bits/ 64 <300000000>;
-			};
-			opp04 {
 				opp-hz = /bits/ 64 <333000000>;
 			};
 		};
@@ -1236,16 +1233,16 @@ 
 			compatible = "operating-points-v2";
 
 			opp00 {
-				opp-hz = /bits/ 64 <67000000>;
+				opp-hz = /bits/ 64 <100000000>;
 			};
 			opp01 {
-				opp-hz = /bits/ 64 <133000000>;
+				opp-hz = /bits/ 64 <150000000>;
 			};
 			opp02 {
-				opp-hz = /bits/ 64 <178000000>;
+				opp-hz = /bits/ 64 <200000000>;
 			};
 			opp03 {
-				opp-hz = /bits/ 64 <267000000>;
+				opp-hz = /bits/ 64 <300000000>;
 			};
 		};