| Message ID | 20190807082556.5013-19-philippe.schenker@toradex.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Common patches from downstream development | expand |
On Wed, 2019-08-07 at 08:26 +0000, Philippe Schenker wrote: > This adds the possibility to wake the module with an external signal > as defined in the Colibri standard > > Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> > --- > > Changes in v3: None > Changes in v2: None > > arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) > > diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi > b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi > index 3bee37c75aa6..d3c4809f140e 100644 > --- a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi > +++ b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi > @@ -8,6 +8,20 @@ > stdout-path = "serial0:115200n8"; > }; > > + gpio-keys { > + compatible = "gpio-keys"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_snvs_gpiokeys>; > + > + power { > + label = "Wake-Up"; > + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; > + linux,code = <KEY_WAKEUP>; > + debounce-interval = <10>; > + wakeup-source; > + }; > + }; > + > /* fixed crystal dedicated to mcp2515 */ > clk16m: clk16m { > compatible = "fixed-clock";
diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi index 3bee37c75aa6..d3c4809f140e 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi @@ -8,6 +8,20 @@ stdout-path = "serial0:115200n8"; }; + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_snvs_gpiokeys>; + + power { + label = "Wake-Up"; + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + }; + /* fixed crystal dedicated to mcp2515 */ clk16m: clk16m { compatible = "fixed-clock";
This adds the possibility to wake the module with an external signal as defined in the Colibri standard Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> --- Changes in v3: None Changes in v2: None arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+)