Message ID | 20190816064710.18280-4-bshah@kde.org (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | Enable the I2C nodes for Allwinner H6 CPU | expand |
65;5603;1c On Fri, Aug 16, 2019 at 12:17:10PM +0530, Bhushan Shah wrote: > i2c0 bus is exposed by PI-2 BUS in the PineH64, model B. > > Signed-off-by: Bhushan Shah <bshah@kde.org> > --- > Changes in v2: > - Don't enable the i2c0 node in PineH64 by default > > arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts > index 684d1daa3081..97d9b7c63fb3 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts > @@ -160,6 +160,15 @@ > vcc-pg-supply = <®_aldo1>; > }; > > +/* This i2c interface is exposed on PI-2 BUS, Pin 3 (I2C_SDA) and 5 (I2C_SCL) */ > +&i2c0 { > + status = "disabled"; > +}; This property is set to disabled in the DTSI already > +&i2c0_pins { > + bias-pull-up; > +}; > + And this should be in the same overlay than the one that sets status to okay. Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
On Fri, Aug 16, 2019 at 09:52:11AM +0200, Maxime Ripard wrote: > > +/* This i2c interface is exposed on PI-2 BUS, Pin 3 (I2C_SDA) and 5 (I2C_SCL) */ > > +&i2c0 { > > + status = "disabled"; > > +}; > > This property is set to disabled in the DTSI already I added this node here with disabled status due to comment from wens in previous revision, main reason being that serves as reference/pointer to people looking at how to enable i2c0. I can remove it if you prefer.
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts index 684d1daa3081..97d9b7c63fb3 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts @@ -160,6 +160,15 @@ vcc-pg-supply = <®_aldo1>; }; +/* This i2c interface is exposed on PI-2 BUS, Pin 3 (I2C_SDA) and 5 (I2C_SCL) */ +&i2c0 { + status = "disabled"; +}; + +&i2c0_pins { + bias-pull-up; +}; + &r_i2c { status = "okay";
i2c0 bus is exposed by PI-2 BUS in the PineH64, model B. Signed-off-by: Bhushan Shah <bshah@kde.org> --- Changes in v2: - Don't enable the i2c0 node in PineH64 by default arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts | 9 +++++++++ 1 file changed, 9 insertions(+)