diff mbox series

[v3,11/11] misc: pci_endpoint_test: Add LS1088a in pci_device_id table

Message ID 20190902031716.43195-12-xiaowei.bao@nxp.com (mailing list archive)
State New, archived
Headers show
Series *** SUBJECT HERE *** | expand

Commit Message

Xiaowei Bao Sept. 2, 2019, 3:17 a.m. UTC
Add LS1088a in pci_device_id table so that pci-epf-test can be used
for testing PCIe EP in LS1088a.

Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
---
v2:
 - No change.
v3:
 - No change.
 
 drivers/misc/pci_endpoint_test.c | 1 +
 1 file changed, 1 insertion(+)

Comments

Andrew Murray Sept. 2, 2019, 12:54 p.m. UTC | #1
On Mon, Sep 02, 2019 at 11:17:16AM +0800, Xiaowei Bao wrote:
> Add LS1088a in pci_device_id table so that pci-epf-test can be used
> for testing PCIe EP in LS1088a.
> 
> Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
> ---
> v2:
>  - No change.
> v3:
>  - No change.
>  
>  drivers/misc/pci_endpoint_test.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c
> index 6e208a0..d531951 100644
> --- a/drivers/misc/pci_endpoint_test.c
> +++ b/drivers/misc/pci_endpoint_test.c
> @@ -793,6 +793,7 @@ static const struct pci_device_id pci_endpoint_test_tbl[] = {
>  	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA74x) },
>  	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA72x) },
>  	{ PCI_DEVICE(PCI_VENDOR_ID_FREESCALE, 0x81c0) },
> +	{ PCI_DEVICE(PCI_VENDOR_ID_FREESCALE, 0x80c0) },

The Freescale PCI devices are the only devices in this table that don't
have a define for their device ID. I think a define should be created
for both of the device IDs above.

Thanks,

Andrew Murray

>  	{ PCI_DEVICE_DATA(SYNOPSYS, EDDA, NULL) },
>  	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_AM654),
>  	  .driver_data = (kernel_ulong_t)&am654_data
> -- 
> 2.9.5
>
Xiaowei Bao Sept. 3, 2019, 1:52 a.m. UTC | #2
> -----Original Message-----
> From: Andrew Murray <andrew.murray@arm.com>
> Sent: 2019年9月2日 20:55
> To: Xiaowei Bao <xiaowei.bao@nxp.com>
> Cc: robh+dt@kernel.org; mark.rutland@arm.com; shawnguo@kernel.org; Leo
> Li <leoyang.li@nxp.com>; kishon@ti.com; lorenzo.pieralisi@arm.com; M.h.
> Lian <minghuan.lian@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; Roy
> Zang <roy.zang@nxp.com>; jingoohan1@gmail.com;
> gustavo.pimentel@synopsys.com; linux-pci@vger.kernel.org;
> devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> linux-arm-kernel@lists.infradead.org; linuxppc-dev@lists.ozlabs.org;
> arnd@arndb.de; gregkh@linuxfoundation.org; Z.q. Hou
> <zhiqiang.hou@nxp.com>
> Subject: Re: [PATCH v3 11/11] misc: pci_endpoint_test: Add LS1088a in
> pci_device_id table
> 
> On Mon, Sep 02, 2019 at 11:17:16AM +0800, Xiaowei Bao wrote:
> > Add LS1088a in pci_device_id table so that pci-epf-test can be used
> > for testing PCIe EP in LS1088a.
> >
> > Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
> > ---
> > v2:
> >  - No change.
> > v3:
> >  - No change.
> >
> >  drivers/misc/pci_endpoint_test.c | 1 +
> >  1 file changed, 1 insertion(+)
> >
> > diff --git a/drivers/misc/pci_endpoint_test.c
> > b/drivers/misc/pci_endpoint_test.c
> > index 6e208a0..d531951 100644
> > --- a/drivers/misc/pci_endpoint_test.c
> > +++ b/drivers/misc/pci_endpoint_test.c
> > @@ -793,6 +793,7 @@ static const struct pci_device_id
> pci_endpoint_test_tbl[] = {
> >  	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA74x) },
> >  	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA72x) },
> >  	{ PCI_DEVICE(PCI_VENDOR_ID_FREESCALE, 0x81c0) },
> > +	{ PCI_DEVICE(PCI_VENDOR_ID_FREESCALE, 0x80c0) },
> 
> The Freescale PCI devices are the only devices in this table that don't have a
> define for their device ID. I think a define should be created for both of the
> device IDs above.

OK, but I only define in this file, I am not sure this can define in include/linux/pci_ids.h
file 

Thanks 
Xiaowei

> 
> Thanks,
> 
> Andrew Murray
> 
> >  	{ PCI_DEVICE_DATA(SYNOPSYS, EDDA, NULL) },
> >  	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_AM654),
> >  	  .driver_data = (kernel_ulong_t)&am654_data
> > --
> > 2.9.5
> >
Andrew Murray Sept. 12, 2019, 12:59 p.m. UTC | #3
On Tue, Sep 03, 2019 at 01:52:30AM +0000, Xiaowei Bao wrote:
> 
> 
> > -----Original Message-----
> > From: Andrew Murray <andrew.murray@arm.com>
> > Sent: 2019年9月2日 20:55
> > To: Xiaowei Bao <xiaowei.bao@nxp.com>
> > Cc: robh+dt@kernel.org; mark.rutland@arm.com; shawnguo@kernel.org; Leo
> > Li <leoyang.li@nxp.com>; kishon@ti.com; lorenzo.pieralisi@arm.com; M.h.
> > Lian <minghuan.lian@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; Roy
> > Zang <roy.zang@nxp.com>; jingoohan1@gmail.com;
> > gustavo.pimentel@synopsys.com; linux-pci@vger.kernel.org;
> > devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> > linux-arm-kernel@lists.infradead.org; linuxppc-dev@lists.ozlabs.org;
> > arnd@arndb.de; gregkh@linuxfoundation.org; Z.q. Hou
> > <zhiqiang.hou@nxp.com>
> > Subject: Re: [PATCH v3 11/11] misc: pci_endpoint_test: Add LS1088a in
> > pci_device_id table
> > 
> > On Mon, Sep 02, 2019 at 11:17:16AM +0800, Xiaowei Bao wrote:
> > > Add LS1088a in pci_device_id table so that pci-epf-test can be used
> > > for testing PCIe EP in LS1088a.
> > >
> > > Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
> > > ---
> > > v2:
> > >  - No change.
> > > v3:
> > >  - No change.
> > >
> > >  drivers/misc/pci_endpoint_test.c | 1 +
> > >  1 file changed, 1 insertion(+)
> > >
> > > diff --git a/drivers/misc/pci_endpoint_test.c
> > > b/drivers/misc/pci_endpoint_test.c
> > > index 6e208a0..d531951 100644
> > > --- a/drivers/misc/pci_endpoint_test.c
> > > +++ b/drivers/misc/pci_endpoint_test.c
> > > @@ -793,6 +793,7 @@ static const struct pci_device_id
> > pci_endpoint_test_tbl[] = {
> > >  	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA74x) },
> > >  	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA72x) },
> > >  	{ PCI_DEVICE(PCI_VENDOR_ID_FREESCALE, 0x81c0) },
> > > +	{ PCI_DEVICE(PCI_VENDOR_ID_FREESCALE, 0x80c0) },
> > 
> > The Freescale PCI devices are the only devices in this table that don't have a
> > define for their device ID. I think a define should be created for both of the
> > device IDs above.
> 
> OK, but I only define in this file, I am not sure this can define in include/linux/pci_ids.h
> file 

This file seems a little inconsistent...

 - Two of the TI device IDs are defined in pci_ids.h and only used in pci_endpoint_test.c
 - One of the TI device IDs are defined in pci_endpoint_test.c and only used there
 - The Freescale device ID is hardcoded and only used in pci_endpoint_test.c

The header in pci_ids.h has a comment suggestion definitions are only added where used
in multiple files - yet I don't think this holds true.

Bjorn - do you have a suggestion?

Thanks,

Andrew Murray

> 
> Thanks 
> Xiaowei
> 
> > 
> > Thanks,
> > 
> > Andrew Murray
> > 
> > >  	{ PCI_DEVICE_DATA(SYNOPSYS, EDDA, NULL) },
> > >  	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_AM654),
> > >  	  .driver_data = (kernel_ulong_t)&am654_data
> > > --
> > > 2.9.5
> > >
Xiaowei Bao Sept. 14, 2019, 4:13 a.m. UTC | #4
> -----Original Message-----
> From: Andrew Murray <andrew.murray@arm.com>
> Sent: 2019年9月12日 21:00
> To: Xiaowei Bao <xiaowei.bao@nxp.com>; helgaas@kernel.org
> Cc: robh+dt@kernel.org; mark.rutland@arm.com; shawnguo@kernel.org; Leo
> Li <leoyang.li@nxp.com>; kishon@ti.com; lorenzo.pieralisi@arm.com; M.h.
> Lian <minghuan.lian@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; Roy
> Zang <roy.zang@nxp.com>; jingoohan1@gmail.com;
> gustavo.pimentel@synopsys.com; linux-pci@vger.kernel.org;
> devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> linux-arm-kernel@lists.infradead.org; linuxppc-dev@lists.ozlabs.org;
> arnd@arndb.de; gregkh@linuxfoundation.org; Z.q. Hou
> <zhiqiang.hou@nxp.com>
> Subject: Re: [PATCH v3 11/11] misc: pci_endpoint_test: Add LS1088a in
> pci_device_id table
> 
> On Tue, Sep 03, 2019 at 01:52:30AM +0000, Xiaowei Bao wrote:
> >
> >
> > > -----Original Message-----
> > > From: Andrew Murray <andrew.murray@arm.com>
> > > Sent: 2019年9月2日 20:55
> > > To: Xiaowei Bao <xiaowei.bao@nxp.com>
> > > Cc: robh+dt@kernel.org; mark.rutland@arm.com; shawnguo@kernel.org;
> > > Leo Li <leoyang.li@nxp.com>; kishon@ti.com; lorenzo.pieralisi@arm.com;
> M.h.
> > > Lian <minghuan.lian@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; Roy
> > > Zang <roy.zang@nxp.com>; jingoohan1@gmail.com;
> > > gustavo.pimentel@synopsys.com; linux-pci@vger.kernel.org;
> > > devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> > > linux-arm-kernel@lists.infradead.org; linuxppc-dev@lists.ozlabs.org;
> > > arnd@arndb.de; gregkh@linuxfoundation.org; Z.q. Hou
> > > <zhiqiang.hou@nxp.com>
> > > Subject: Re: [PATCH v3 11/11] misc: pci_endpoint_test: Add LS1088a
> > > in pci_device_id table
> > >
> > > On Mon, Sep 02, 2019 at 11:17:16AM +0800, Xiaowei Bao wrote:
> > > > Add LS1088a in pci_device_id table so that pci-epf-test can be
> > > > used for testing PCIe EP in LS1088a.
> > > >
> > > > Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
> > > > ---
> > > > v2:
> > > >  - No change.
> > > > v3:
> > > >  - No change.
> > > >
> > > >  drivers/misc/pci_endpoint_test.c | 1 +
> > > >  1 file changed, 1 insertion(+)
> > > >
> > > > diff --git a/drivers/misc/pci_endpoint_test.c
> > > > b/drivers/misc/pci_endpoint_test.c
> > > > index 6e208a0..d531951 100644
> > > > --- a/drivers/misc/pci_endpoint_test.c
> > > > +++ b/drivers/misc/pci_endpoint_test.c
> > > > @@ -793,6 +793,7 @@ static const struct pci_device_id
> > > pci_endpoint_test_tbl[] = {
> > > >  	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA74x) },
> > > >  	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA72x) },
> > > >  	{ PCI_DEVICE(PCI_VENDOR_ID_FREESCALE, 0x81c0) },
> > > > +	{ PCI_DEVICE(PCI_VENDOR_ID_FREESCALE, 0x80c0) },
> > >
> > > The Freescale PCI devices are the only devices in this table that
> > > don't have a define for their device ID. I think a define should be
> > > created for both of the device IDs above.
> >
> > OK, but I only define in this file, I am not sure this can define in
> > include/linux/pci_ids.h file
> 
> This file seems a little inconsistent...
> 
>  - Two of the TI device IDs are defined in pci_ids.h and only used in
> pci_endpoint_test.c
>  - One of the TI device IDs are defined in pci_endpoint_test.c and only used
> there
>  - The Freescale device ID is hardcoded and only used in pci_endpoint_test.c
> 
> The header in pci_ids.h has a comment suggestion definitions are only added
> where used in multiple files - yet I don't think this holds true.

Thanks Andrew.


> 
> Bjorn - do you have a suggestion?
> 
> Thanks,
> 
> Andrew Murray
> 
> >
> > Thanks
> > Xiaowei
> >
> > >
> > > Thanks,
> > >
> > > Andrew Murray
> > >
> > > >  	{ PCI_DEVICE_DATA(SYNOPSYS, EDDA, NULL) },
> > > >  	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_AM654),
> > > >  	  .driver_data = (kernel_ulong_t)&am654_data
> > > > --
> > > > 2.9.5
> > > >
diff mbox series

Patch

diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c
index 6e208a0..d531951 100644
--- a/drivers/misc/pci_endpoint_test.c
+++ b/drivers/misc/pci_endpoint_test.c
@@ -793,6 +793,7 @@  static const struct pci_device_id pci_endpoint_test_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA74x) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA72x) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_FREESCALE, 0x81c0) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_FREESCALE, 0x80c0) },
 	{ PCI_DEVICE_DATA(SYNOPSYS, EDDA, NULL) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_AM654),
 	  .driver_data = (kernel_ulong_t)&am654_data