diff mbox series

[v3,05/11] dt-bindings: pci: layerscape-pci: add compatible strings for ls1088a and ls2088a

Message ID 20190902031716.43195-6-xiaowei.bao@nxp.com (mailing list archive)
State New, archived
Headers show
Series *** SUBJECT HERE *** | expand

Commit Message

Xiaowei Bao Sept. 2, 2019, 3:17 a.m. UTC
Add compatible strings for ls1088a and ls2088a.

Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
---
v2:
 - No change.
v3:
 - Use one valid combination of compatible strings.

 Documentation/devicetree/bindings/pci/layerscape-pci.txt | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

Comments

Andrew Murray Sept. 2, 2019, 12:31 p.m. UTC | #1
On Mon, Sep 02, 2019 at 11:17:10AM +0800, Xiaowei Bao wrote:
> Add compatible strings for ls1088a and ls2088a.
> 
> Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
> ---
> v2:
>  - No change.
> v3:
>  - Use one valid combination of compatible strings.
> 
>  Documentation/devicetree/bindings/pci/layerscape-pci.txt | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> index e20ceaa..762ae41 100644
> --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> @@ -22,7 +22,9 @@ Required properties:
>          "fsl,ls1043a-pcie"
>          "fsl,ls1012a-pcie"
>    EP mode:
> -	"fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
> +	"fsl,ls1046a-pcie-ep" "fsl,ls-pcie-ep"
> +	"fsl,ls1088a-pcie-ep" "fsl,ls-pcie-ep"
> +	"fsl,ls2088a-pcie-ep" "fsl,ls-pcie-ep"

This isn't consistent with "[PATCH v3 09/11] PCI: layerscape: Add EP mode..."
as that patch drops the fallback "fsl,ls-pcie-ep". Either the fallback must
be preserved in the driver, or you need to drop it here.

What if there are existing users that depend on the fallback?

(I'm also not sure if that comma should have been dropped).

Thanks,

Andrew Murray

>  - reg: base addresses and lengths of the PCIe controller register blocks.
>  - interrupts: A list of interrupt outputs of the controller. Must contain an
>    entry for each entry in the interrupt-names property.
> -- 
> 2.9.5
>
Xiaowei Bao Sept. 3, 2019, 1:33 a.m. UTC | #2
> -----Original Message-----
> From: Andrew Murray <andrew.murray@arm.com>
> Sent: 2019年9月2日 20:32
> To: Xiaowei Bao <xiaowei.bao@nxp.com>
> Cc: robh+dt@kernel.org; mark.rutland@arm.com; shawnguo@kernel.org; Leo
> Li <leoyang.li@nxp.com>; kishon@ti.com; lorenzo.pieralisi@arm.com; M.h.
> Lian <minghuan.lian@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; Roy
> Zang <roy.zang@nxp.com>; jingoohan1@gmail.com;
> gustavo.pimentel@synopsys.com; linux-pci@vger.kernel.org;
> devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> linux-arm-kernel@lists.infradead.org; linuxppc-dev@lists.ozlabs.org;
> arnd@arndb.de; gregkh@linuxfoundation.org; Z.q. Hou
> <zhiqiang.hou@nxp.com>
> Subject: Re: [PATCH v3 05/11] dt-bindings: pci: layerscape-pci: add compatible
> strings for ls1088a and ls2088a
> 
> On Mon, Sep 02, 2019 at 11:17:10AM +0800, Xiaowei Bao wrote:
> > Add compatible strings for ls1088a and ls2088a.
> >
> > Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
> > ---
> > v2:
> >  - No change.
> > v3:
> >  - Use one valid combination of compatible strings.
> >
> >  Documentation/devicetree/bindings/pci/layerscape-pci.txt | 4 +++-
> >  1 file changed, 3 insertions(+), 1 deletion(-)
> >
> > diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> > b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> > index e20ceaa..762ae41 100644
> > --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> > +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> > @@ -22,7 +22,9 @@ Required properties:
> >          "fsl,ls1043a-pcie"
> >          "fsl,ls1012a-pcie"
> >    EP mode:
> > -	"fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
> > +	"fsl,ls1046a-pcie-ep" "fsl,ls-pcie-ep"
> > +	"fsl,ls1088a-pcie-ep" "fsl,ls-pcie-ep"
> > +	"fsl,ls2088a-pcie-ep" "fsl,ls-pcie-ep"
> 
> This isn't consistent with "[PATCH v3 09/11] PCI: layerscape: Add EP mode..."
> as that patch drops the fallback "fsl,ls-pcie-ep". Either the fallback must be
> preserved in the driver, or you need to drop it here.
> 
> What if there are existing users that depend on the fallback?
> 
> (I'm also not sure if that comma should have been dropped).

Hi Andrew,

Thanks for your comments, I lose the comma.

Thanks 
Xiaowei

> 
> Thanks,
> 
> Andrew Murray
> 
> >  - reg: base addresses and lengths of the PCIe controller register blocks.
> >  - interrupts: A list of interrupt outputs of the controller. Must contain an
> >    entry for each entry in the interrupt-names property.
> > --
> > 2.9.5
> >
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
index e20ceaa..762ae41 100644
--- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
+++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
@@ -22,7 +22,9 @@  Required properties:
         "fsl,ls1043a-pcie"
         "fsl,ls1012a-pcie"
   EP mode:
-	"fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
+	"fsl,ls1046a-pcie-ep" "fsl,ls-pcie-ep"
+	"fsl,ls1088a-pcie-ep" "fsl,ls-pcie-ep"
+	"fsl,ls2088a-pcie-ep" "fsl,ls-pcie-ep"
 - reg: base addresses and lengths of the PCIe controller register blocks.
 - interrupts: A list of interrupt outputs of the controller. Must contain an
   entry for each entry in the interrupt-names property.