[3/3] ARM: dts: Update reset for hi3519 and hi3798cv200

Commit Message

Jun Nie Dec. 2, 2019, 2:45 p.m. UTC

Update reset for hi3519 and hi3798cv200 as driver is extended to
support configurable reset operation type.

Signed-off-by: Jun Nie <[e-mail]>
---
 arch/arm/boot/dts/hi3519.dtsi                 |  2 +-
 .../arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 47 +++++++++++--------
 2 files changed, 28 insertions(+), 21 deletions(-)

Patch

diff --git a/arch/arm/boot/dts/hi3519.dtsi b/arch/arm/boot/dts/hi3519.dtsi
index 410409a0ed66..2335c8443d2d 100644
--- a/arch/arm/boot/dts/hi3519.dtsi
+++ b/arch/arm/boot/dts/hi3519.dtsi
@@ -37,7 +37,7 @@ 
 	crg: clock-reset-controller@12010000 {
 		compatible = "hisilicon,hi3519-crg";
 		#clock-cells = <1>;
-		#reset-cells = <2>;
+		#reset-cells = <3>;
 		reg = <0x12010000 0x10000>;
 	};
 
diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
index 13821a0ff524..0a30aaae6bf2 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
@@ -9,8 +9,10 @@ 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/phy/phy.h>
+#include <dt-bindings/reset/hisilicon-resets.h>
 #include <dt-bindings/reset/ti-syscon.h>
 
+
 / {
 	compatible = "hisilicon,hi3798cv200";
 	interrupt-parent = <&gic>;
@@ -86,7 +88,7 @@ 
 			compatible = "hisilicon,hi3798cv200-crg", "syscon", "simple-mfd";
 			reg = <0x8a22000 0x1000>;
 			#clock-cells = <1>;
-			#reset-cells = <2>;
+			#reset-cells = <3>;
 
 			gmacphyrst: reset-controller {
 				compatible = "ti,syscon-reset";
@@ -103,7 +105,7 @@ 
 			compatible = "hisilicon,hi3798cv200-sysctrl", "syscon";
 			reg = <0x8000000 0x1000>;
 			#clock-cells = <1>;
-			#reset-cells = <2>;
+			#reset-cells = <3>;
 		};
 
 		perictrl: peripheral-controller@8a20000 {
@@ -118,20 +120,22 @@ 
 				compatible = "hisilicon,hi3798cv200-usb2-phy";
 				reg = <0x120 0x4>;
 				clocks = <&crg HISTB_USB2_PHY1_REF_CLK>;
-				resets = <&crg 0xbc 4>;
+				resets = <&crg 0xbc 4 HISI_RESET_DEFAULT>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 
 				usb2_phy1_port0: phy@0 {
 					reg = <0>;
 					#phy-cells = <0>;
-					resets = <&crg 0xbc 8>;
+					resets = <&crg 0xbc 8
+						  HISI_RESET_DEFAULT>;
 				};
 
 				usb2_phy1_port1: phy@1 {
 					reg = <1>;
 					#phy-cells = <0>;
-					resets = <&crg 0xbc 9>;
+					resets = <&crg 0xbc 9
+						  HISI_RESET_DEFAULT>;
 				};
 			};
 
@@ -139,14 +143,15 @@ 
 				compatible = "hisilicon,hi3798cv200-usb2-phy";
 				reg = <0x124 0x4>;
 				clocks = <&crg HISTB_USB2_PHY2_REF_CLK>;
-				resets = <&crg 0xbc 6>;
+				resets = <&crg 0xbc 6 HISI_RESET_DEFAULT>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 
 				usb2_phy2_port0: phy@0 {
 					reg = <0>;
 					#phy-cells = <0>;
-					resets = <&crg 0xbc 10>;
+					resets = <&crg 0xbc 10
+						  HISI_RESET_DEFAULT>;
 				};
 			};
 
@@ -155,7 +160,7 @@ 
 				reg = <0x850 0x8>;
 				#phy-cells = <1>;
 				clocks = <&crg HISTB_COMBPHY0_CLK>;
-				resets = <&crg 0x188 4>;
+				resets = <&crg 0x188 4 HISI_RESET_DEFAULT>;
 				assigned-clocks = <&crg HISTB_COMBPHY0_CLK>;
 				assigned-clock-rates = <100000000>;
 				hisilicon,fixed-mode = <PHY_TYPE_USB3>;
@@ -166,7 +171,7 @@ 
 				reg = <0x858 0x8>;
 				#phy-cells = <1>;
 				clocks = <&crg HISTB_COMBPHY1_CLK>;
-				resets = <&crg 0x188 12>;
+				resets = <&crg 0x188 12 HISI_RESET_DEFAULT>;
 				assigned-clocks = <&crg HISTB_COMBPHY1_CLK>;
 				assigned-clock-rates = <100000000>;
 				hisilicon,mode-select-bits = <0x0008 11 (0x3 << 11)>;
@@ -306,7 +311,7 @@ 
 			clocks = <&crg HISTB_SDIO0_CIU_CLK>,
 				 <&crg HISTB_SDIO0_BIU_CLK>;
 			clock-names = "ciu", "biu";
-			resets = <&crg 0x9c 4>;
+			resets = <&crg 0x9c 4 HISI_RESET_DEFAULT>;
 			reset-names = "reset";
 			status = "disabled";
 		};
@@ -320,7 +325,7 @@ 
 				 <&crg HISTB_MMC_SAMPLE_CLK>,
 				 <&crg HISTB_MMC_DRV_CLK>;
 			clock-names = "ciu", "biu", "ciu-sample", "ciu-drive";
-			resets = <&crg 0xa0 4>;
+			resets = <&crg 0xa0 4 HISI_RESET_DEFAULT>;
 			reset-names = "reset";
 			status = "disabled";
 		};
@@ -525,8 +530,8 @@ 
 			clocks = <&crg HISTB_ETH0_MAC_CLK>,
 				 <&crg HISTB_ETH0_MACIF_CLK>;
 			clock-names = "mac_core", "mac_ifc";
-			resets = <&crg 0xcc 8>,
-				 <&crg 0xcc 10>,
+			resets = <&crg 0xcc 8 HISI_RESET_DEFAULT>,
+				 <&crg 0xcc 10 HISI_RESET_DEFAULT>,
 				 <&gmacphyrst 0>;
 			reset-names = "mac_core", "mac_ifc", "phy";
 			status = "disabled";
@@ -540,8 +545,8 @@ 
 			clocks = <&crg HISTB_ETH1_MAC_CLK>,
 				 <&crg HISTB_ETH1_MACIF_CLK>;
 			clock-names = "mac_core", "mac_ifc";
-			resets = <&crg 0xcc 9>,
-				 <&crg 0xcc 11>,
+			resets = <&crg 0xcc 9 HISI_RESET_DEFAULT>,
+				 <&crg 0xcc 11 HISI_RESET_DEFAULT>,
 				 <&gmacphyrst 1>;
 			reset-names = "mac_core", "mac_ifc", "phy";
 			status = "disabled";
@@ -578,7 +583,9 @@ 
 				 <&crg HISTB_PCIE_SYS_CLK>,
 				 <&crg HISTB_PCIE_BUS_CLK>;
 			clock-names = "aux", "pipe", "sys", "bus";
-			resets = <&crg 0x18c 6>, <&crg 0x18c 5>, <&crg 0x18c 4>;
+			resets = <&crg 0x18c 6 HISI_RESET_DEFAULT>,
+				 <&crg 0x18c 5 HISI_RESET_DEFAULT>,
+				 <&crg 0x18c 4 HISI_RESET_DEFAULT>;
 			reset-names = "soft", "sys", "bus";
 			phys = <&combphy1 PHY_TYPE_PCIE>;
 			phy-names = "phy";
@@ -593,7 +600,7 @@ 
 				 <&crg HISTB_USB2_12M_CLK>,
 				 <&crg HISTB_USB2_48M_CLK>;
 			clock-names = "bus", "clk12", "clk48";
-			resets = <&crg 0xb8 12>;
+			resets = <&crg 0xb8 12 HISI_RESET_DEFAULT>;
 			reset-names = "bus";
 			phys = <&usb2_phy1_port0>;
 			phy-names = "usb";
@@ -608,9 +615,9 @@ 
 				 <&crg HISTB_USB2_PHY_CLK>,
 				 <&crg HISTB_USB2_UTMI_CLK>;
 			clock-names = "bus", "phy", "utmi";
-			resets = <&crg 0xb8 12>,
-				 <&crg 0xb8 16>,
-				 <&crg 0xb8 13>;
+			resets = <&crg 0xb8 12 HISI_RESET_DEFAULT>,
+				 <&crg 0xb8 16 HISI_RESET_DEFAULT>,
+				 <&crg 0xb8 13 HISI_RESET_DEFAULT>;
 			reset-names = "bus", "phy", "utmi";
 			phys = <&usb2_phy1_port0>;
 			phy-names = "usb";