| Message ID | 20200419170810.5738-2-robh@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Modularizing Versatile Express | expand |
On Sun, Apr 19, 2020 at 7:08 PM Rob Herring <robh@kernel.org> wrote: > > vexpress_flags_set() is only used by the platform SMP related code and > has nothing to do with the vexpress-sysreg MFD driver other than both > access the same h/w block. It's also only needed for 32-bit systems and > must be built-in for them. Let's move vexpress_flags_set() closer to > where it is being used. This will allow for vexpress-sysreg to be built > as a module. > > Cc: Liviu Dudau <liviu.dudau@arm.com> > Cc: Sudeep Holla <sudeep.holla@arm.com> > Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > Cc: Linus Walleij <linus.walleij@linaro.org> > Cc: Lee Jones <lee.jones@linaro.org> > Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
On Sun, Apr 19, 2020 at 12:07:54PM -0500, Rob Herring wrote: > vexpress_flags_set() is only used by the platform SMP related code and > has nothing to do with the vexpress-sysreg MFD driver other than both > access the same h/w block. It's also only needed for 32-bit systems and > must be built-in for them. Let's move vexpress_flags_set() closer to > where it is being used. This will allow for vexpress-sysreg to be built > as a module. > > Cc: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Unfortunately I did not had the forethought to leave my Versatile Express board plugged in before our office lockdown, so I will not have a chance to test the series. Best regards, Liviu > Cc: Sudeep Holla <sudeep.holla@arm.com> > Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > Cc: Linus Walleij <linus.walleij@linaro.org> > Cc: Lee Jones <lee.jones@linaro.org> > Signed-off-by: Rob Herring <robh@kernel.org> > --- > arch/arm/mach-vexpress/Kconfig | 1 - > arch/arm/mach-vexpress/core.h | 1 + > arch/arm/mach-vexpress/dcscb.c | 1 + > arch/arm/mach-vexpress/v2m.c | 23 +++++++++++++++++++++++ > drivers/mfd/vexpress-sysreg.c | 19 ------------------- > include/linux/vexpress.h | 4 ---- > 6 files changed, 25 insertions(+), 24 deletions(-) > > diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig > index 726a68085c3b..18951cd20d9d 100644 > --- a/arch/arm/mach-vexpress/Kconfig > +++ b/arch/arm/mach-vexpress/Kconfig > @@ -22,7 +22,6 @@ menuconfig ARCH_VEXPRESS > select REGULATOR_FIXED_VOLTAGE if REGULATOR > select VEXPRESS_CONFIG > select VEXPRESS_SYSCFG > - select MFD_VEXPRESS_SYSREG > help > This option enables support for systems using Cortex processor based > ARM core and logic (FPGA) tiles on the Versatile Express motherboard, > diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h > index f4a7519084f1..bda78675c55d 100644 > --- a/arch/arm/mach-vexpress/core.h > +++ b/arch/arm/mach-vexpress/core.h > @@ -1,3 +1,4 @@ > bool vexpress_smp_init_ops(void); > +void vexpress_flags_set(u32 data); > > extern const struct smp_operations vexpress_smp_dt_ops; > diff --git a/arch/arm/mach-vexpress/dcscb.c b/arch/arm/mach-vexpress/dcscb.c > index 46a903c88c6a..a0554d7d04f7 100644 > --- a/arch/arm/mach-vexpress/dcscb.c > +++ b/arch/arm/mach-vexpress/dcscb.c > @@ -20,6 +20,7 @@ > #include <asm/cputype.h> > #include <asm/cp15.h> > > +#include "core.h" > > #define RST_HOLD0 0x0 > #define RST_HOLD1 0x4 > diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c > index 95886b3bb9dd..ffe7c7a85ae9 100644 > --- a/arch/arm/mach-vexpress/v2m.c > +++ b/arch/arm/mach-vexpress/v2m.c > @@ -1,8 +1,31 @@ > // SPDX-License-Identifier: GPL-2.0 > +#include <linux/of.h> > +#include <linux/of_address.h> > #include <asm/mach/arch.h> > > #include "core.h" > > +#define SYS_FLAGSSET 0x030 > +#define SYS_FLAGSCLR 0x034 > + > +void vexpress_flags_set(u32 data) > +{ > + static void __iomem *base; > + > + if (!base) { > + struct device_node *node = of_find_compatible_node(NULL, NULL, > + "arm,vexpress-sysreg"); > + > + base = of_iomap(node, 0); > + } > + > + if (WARN_ON(!base)) > + return; > + > + writel(~0, base + SYS_FLAGSCLR); > + writel(data, base + SYS_FLAGSSET); > +} > + > static const char * const v2m_dt_match[] __initconst = { > "arm,vexpress", > NULL, > diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c > index c68ff56dbdb1..0b9cc67706c7 100644 > --- a/drivers/mfd/vexpress-sysreg.c > +++ b/drivers/mfd/vexpress-sysreg.c > @@ -8,7 +8,6 @@ > #include <linux/err.h> > #include <linux/io.h> > #include <linux/mfd/core.h> > -#include <linux/of_address.h> > #include <linux/of_platform.h> > #include <linux/platform_data/syscon.h> > #include <linux/platform_device.h> > @@ -42,24 +41,6 @@ > > #define SYS_MISC_MASTERSITE (1 << 14) > > -void vexpress_flags_set(u32 data) > -{ > - static void __iomem *base; > - > - if (!base) { > - struct device_node *node = of_find_compatible_node(NULL, NULL, > - "arm,vexpress-sysreg"); > - > - base = of_iomap(node, 0); > - } > - > - if (WARN_ON(!base)) > - return; > - > - writel(~0, base + SYS_FLAGSCLR); > - writel(data, base + SYS_FLAGSSET); > -} > - > /* The sysreg block is just a random collection of various functions... */ > > static struct syscon_platform_data vexpress_sysreg_sys_id_pdata = { > diff --git a/include/linux/vexpress.h b/include/linux/vexpress.h > index 0e130b5077a5..2ec7992b054c 100644 > --- a/include/linux/vexpress.h > +++ b/include/linux/vexpress.h > @@ -40,8 +40,4 @@ struct device *vexpress_config_bridge_register(struct device *parent, > > struct regmap *devm_regmap_init_vexpress_config(struct device *dev); > > -/* Platform control */ > - > -void vexpress_flags_set(u32 data); > - > #endif > -- > 2.20.1 >
On Sun, Apr 19, 2020 at 12:07:54PM -0500, Rob Herring wrote: > vexpress_flags_set() is only used by the platform SMP related code and > has nothing to do with the vexpress-sysreg MFD driver other than both > access the same h/w block. It's also only needed for 32-bit systems and > must be built-in for them. Let's move vexpress_flags_set() closer to > where it is being used. This will allow for vexpress-sysreg to be built > as a module. > > Cc: Liviu Dudau <liviu.dudau@arm.com> > Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 726a68085c3b..18951cd20d9d 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -22,7 +22,6 @@ menuconfig ARCH_VEXPRESS select REGULATOR_FIXED_VOLTAGE if REGULATOR select VEXPRESS_CONFIG select VEXPRESS_SYSCFG - select MFD_VEXPRESS_SYSREG help This option enables support for systems using Cortex processor based ARM core and logic (FPGA) tiles on the Versatile Express motherboard, diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h index f4a7519084f1..bda78675c55d 100644 --- a/arch/arm/mach-vexpress/core.h +++ b/arch/arm/mach-vexpress/core.h @@ -1,3 +1,4 @@ bool vexpress_smp_init_ops(void); +void vexpress_flags_set(u32 data); extern const struct smp_operations vexpress_smp_dt_ops; diff --git a/arch/arm/mach-vexpress/dcscb.c b/arch/arm/mach-vexpress/dcscb.c index 46a903c88c6a..a0554d7d04f7 100644 --- a/arch/arm/mach-vexpress/dcscb.c +++ b/arch/arm/mach-vexpress/dcscb.c @@ -20,6 +20,7 @@ #include <asm/cputype.h> #include <asm/cp15.h> +#include "core.h" #define RST_HOLD0 0x0 #define RST_HOLD1 0x4 diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 95886b3bb9dd..ffe7c7a85ae9 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -1,8 +1,31 @@ // SPDX-License-Identifier: GPL-2.0 +#include <linux/of.h> +#include <linux/of_address.h> #include <asm/mach/arch.h> #include "core.h" +#define SYS_FLAGSSET 0x030 +#define SYS_FLAGSCLR 0x034 + +void vexpress_flags_set(u32 data) +{ + static void __iomem *base; + + if (!base) { + struct device_node *node = of_find_compatible_node(NULL, NULL, + "arm,vexpress-sysreg"); + + base = of_iomap(node, 0); + } + + if (WARN_ON(!base)) + return; + + writel(~0, base + SYS_FLAGSCLR); + writel(data, base + SYS_FLAGSSET); +} + static const char * const v2m_dt_match[] __initconst = { "arm,vexpress", NULL, diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c index c68ff56dbdb1..0b9cc67706c7 100644 --- a/drivers/mfd/vexpress-sysreg.c +++ b/drivers/mfd/vexpress-sysreg.c @@ -8,7 +8,6 @@ #include <linux/err.h> #include <linux/io.h> #include <linux/mfd/core.h> -#include <linux/of_address.h> #include <linux/of_platform.h> #include <linux/platform_data/syscon.h> #include <linux/platform_device.h> @@ -42,24 +41,6 @@ #define SYS_MISC_MASTERSITE (1 << 14) -void vexpress_flags_set(u32 data) -{ - static void __iomem *base; - - if (!base) { - struct device_node *node = of_find_compatible_node(NULL, NULL, - "arm,vexpress-sysreg"); - - base = of_iomap(node, 0); - } - - if (WARN_ON(!base)) - return; - - writel(~0, base + SYS_FLAGSCLR); - writel(data, base + SYS_FLAGSSET); -} - /* The sysreg block is just a random collection of various functions... */ static struct syscon_platform_data vexpress_sysreg_sys_id_pdata = { diff --git a/include/linux/vexpress.h b/include/linux/vexpress.h index 0e130b5077a5..2ec7992b054c 100644 --- a/include/linux/vexpress.h +++ b/include/linux/vexpress.h @@ -40,8 +40,4 @@ struct device *vexpress_config_bridge_register(struct device *parent, struct regmap *devm_regmap_init_vexpress_config(struct device *dev); -/* Platform control */ - -void vexpress_flags_set(u32 data); - #endif
vexpress_flags_set() is only used by the platform SMP related code and has nothing to do with the vexpress-sysreg MFD driver other than both access the same h/w block. It's also only needed for 32-bit systems and must be built-in for them. Let's move vexpress_flags_set() closer to where it is being used. This will allow for vexpress-sysreg to be built as a module. Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> --- arch/arm/mach-vexpress/Kconfig | 1 - arch/arm/mach-vexpress/core.h | 1 + arch/arm/mach-vexpress/dcscb.c | 1 + arch/arm/mach-vexpress/v2m.c | 23 +++++++++++++++++++++++ drivers/mfd/vexpress-sysreg.c | 19 ------------------- include/linux/vexpress.h | 4 ---- 6 files changed, 25 insertions(+), 24 deletions(-)