[v3,4/8] dt-bindings: phy: Convert Calxeda ComboPHY binding to json-schema

Commit Message

Andre Przywara April 30, 2020, 9:10 p.m. UTC

Convert the Calxeda ComboPHY binding to DT schema format using
json-schema.
There is no driver in the Linux kernel matching the compatible
string, but the nodes are parsed by the SATA driver, which links to them
using its port-phys property.

Signed-off-by: Andre Przywara <[e-mail]>
---
 .../bindings/phy/calxeda-combophy.txt         | 17 -------
 .../bindings/phy/calxeda-combophy.yaml        | 51 +++++++++++++++++++
 2 files changed, 51 insertions(+), 17 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/phy/calxeda-combophy.txt
 create mode 100644 Documentation/devicetree/bindings/phy/calxeda-combophy.yaml

Comments

Rob Herring May 3, 2020, 3:55 p.m. UTC | #1

On Thu, 30 Apr 2020 22:10:50 +0100, Andre Przywara wrote:
> Convert the Calxeda ComboPHY binding to DT schema format using
> json-schema.
> There is no driver in the Linux kernel matching the compatible
> string, but the nodes are parsed by the SATA driver, which links to them
> using its port-phys property.
> 
> Signed-off-by: Andre Przywara <[e-mail]>
> ---
>  .../bindings/phy/calxeda-combophy.txt         | 17 -------
>  .../bindings/phy/calxeda-combophy.yaml        | 51 +++++++++++++++++++
>  2 files changed, 51 insertions(+), 17 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/phy/calxeda-combophy.txt
>  create mode 100644 Documentation/devicetree/bindings/phy/calxeda-combophy.yaml
> 

Applied, thanks.

Rob

Patch

diff --git a/Documentation/devicetree/bindings/phy/calxeda-combophy.txt b/Documentation/devicetree/bindings/phy/calxeda-combophy.txt
deleted file mode 100644
index 6622bdb2e8bc..000000000000
--- a/Documentation/devicetree/bindings/phy/calxeda-combophy.txt
+++ /dev/null
@@ -1,17 +0,0 @@ 
-Calxeda Highbank Combination Phys for SATA
-
-Properties:
-- compatible : Should be "calxeda,hb-combophy"
-- #phy-cells: Should be 1.
-- reg : Address and size for Combination Phy registers.
-- phydev: device ID for programming the combophy.
-
-Example:
-
-	combophy5: combo-phy@fff5d000 {
-		compatible = "calxeda,hb-combophy";
-		#phy-cells = <1>;
-		reg = <0xfff5d000 0x1000>;
-		phydev = <31>;
-	};
-
diff --git a/Documentation/devicetree/bindings/phy/calxeda-combophy.yaml b/Documentation/devicetree/bindings/phy/calxeda-combophy.yaml
new file mode 100644
index 000000000000..16a8bd7644bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/calxeda-combophy.yaml
@@ -0,0 +1,51 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/calxeda-combophy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Calxeda Highbank Combination PHYs binding for SATA
+
+description: |
+  The Calxeda Combination PHYs connect the SoC to the internal fabric
+  and to SATA connectors. The PHYs support multiple protocols (SATA,
+  SGMII, PCIe) and can be assigned to different devices (SATA or XGMAC
+  controller).
+  Programming the PHYs is typically handled by those device drivers,
+  not by a dedicated PHY driver.
+
+maintainers:
+  - Andre Przywara <[e-mail]>
+
+properties:
+  compatible:
+    const: calxeda,hb-combophy
+
+  '#phy-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  phydev:
+    description: device ID for programming the ComboPHY.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - maximum: 31
+
+required:
+  - compatible
+  - reg
+  - phydev
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    combophy5: combo-phy@fff5d000 {
+                   compatible = "calxeda,hb-combophy";
+                   #phy-cells = <1>;
+                   reg = <0xfff5d000 0x1000>;
+                   phydev = <31>;
+               };