Message ID | 20201024162515.30032-1-wens@kernel.org (mailing list archive) |
---|---|
State | Mainlined, archived |
Headers | show |
Series | [01/10] Revert "arm: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high" | expand |
Dne sobota, 24. oktober 2020 ob 18:25:06 CET je Chen-Yu Tsai napisal(a): > From: Chen-Yu Tsai <wens@csie.org> > > This reverts commit 75ee680cbd2e4d0156b94f9fec50076361ab12f2. > > Turns out the activity and link LEDs on the RJ45 port are active low, > just like on the Orange Pi PC. > > Revert the commit that says otherwise. > > Fixes: 75ee680cbd2e ("arm: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high") > Fixes: 4904337fe34f ("ARM: dts: sunxi: Restore EMAC changes (boards)") > Signed-off-by: Chen-Yu Tsai <wens@csie.org> > --- > If you have this board, please help test it. > > For me, the correct lighting of the LEDs is both LEDs should be lit > when connected at 100 Mbps. Tested-by: Jernej Skrabec <jernej.skrabec@siol.net> Acked-by: Jernej Skrabec <jernej.skrabec@siol.net> Best regards, Jernej
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts index 71fb73208939..babf4cf1b2f6 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts @@ -53,11 +53,6 @@ aliases { }; }; -&emac { - /* LEDs changed to active high on the plus */ - /delete-property/ allwinner,leds-active-low; -}; - &mmc1 { vmmc-supply = <®_vcc3v3>; bus-width = <4>;