diff mbox series

[2/8] arm64: dts: ti: k3-am654-base-board: Add mailboxes to R5Fs

Message ID 20201029033802.15366-3-s-anna@ti.com (mailing list archive)
State New, archived
Headers show
Series Add R5F nodes on TI K3 AM65x and J721E SoCs | expand

Commit Message

Suman Anna Oct. 29, 2020, 3:37 a.m. UTC 
Add the required 'mboxes' property to both the R5F processors on all the
TI K3 AM65x boards. The mailboxes and some shared memory are required
for running the Remote Processor Messaging (RPMsg) stack between the
host processor and each of the R5Fs. The chosen sub-mailboxes match the
values used in the current firmware images. This can be changed, if
needed, as per the system integration needs after making appropriate
changes on the firmware side as well.

Note that the R5F Core1 resources are needed and used only when the
R5F cluster is configured for Split-mode.

Signed-off-by: Suman Anna <s-anna@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index d12dd89f3405..0cb5b9cb65ba 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -1,6 +1,6 @@ 
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
@@ -441,6 +441,14 @@  &mailbox0_cluster11 {
 	status = "disabled";
 };
 
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+};
+
+&mcu_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>;
+};
+
 &ospi0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;