diff mbox series

[08/13] arm: imx: rename DEBUG_IMX21_IMX27_UART to DEBUG_IMX27_UART

Message ID 20211028141938.3530-9-lukas.bulwahn@gmail.com (mailing list archive)
State New, archived
Headers show
Series Kconfig symbol clean-up on ./arch/arm{64} | expand

Commit Message

Lukas Bulwahn Oct. 28, 2021, 2:19 p.m. UTC 
Since commit 4b563a066611 ("ARM: imx: Remove imx21 support"), the config
DEBUG_IMX21_IMX27_UART is really only debug support for IMX27.

So, rename this option to DEBUG_IMX27_UART and adjust dependencies in
Kconfig and rename the definitions to IMX27 as further clean-up.

This issue was discovered with ./scripts/checkkconfigsymbols.py, which
reported that DEBUG_IMX21_IMX27_UART depends on the non-existing config
SOC_IMX21.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
---
 arch/arm/Kconfig.debug            | 14 +++++++-------
 arch/arm/include/debug/imx-uart.h | 18 +++++++++---------
 2 files changed, 16 insertions(+), 16 deletions(-)

Comments

Arnd Bergmann Oct. 28, 2021, 2:49 p.m. UTC | #1 
On Thu, Oct 28, 2021 at 4:19 PM Lukas Bulwahn <lukas.bulwahn@gmail.com> wrote:
>
> Since commit 4b563a066611 ("ARM: imx: Remove imx21 support"), the config
> DEBUG_IMX21_IMX27_UART is really only debug support for IMX27.
>
> So, rename this option to DEBUG_IMX27_UART and adjust dependencies in
> Kconfig and rename the definitions to IMX27 as further clean-up.
>
> This issue was discovered with ./scripts/checkkconfigsymbols.py, which
> reported that DEBUG_IMX21_IMX27_UART depends on the non-existing config
> SOC_IMX21.
>
> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>


Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Shawn Guo Nov. 21, 2021, 8:47 a.m. UTC | #2 
On Thu, Oct 28, 2021 at 04:19:33PM +0200, Lukas Bulwahn wrote:
> Since commit 4b563a066611 ("ARM: imx: Remove imx21 support"), the config
> DEBUG_IMX21_IMX27_UART is really only debug support for IMX27.
> 
> So, rename this option to DEBUG_IMX27_UART and adjust dependencies in
> Kconfig and rename the definitions to IMX27 as further clean-up.
> 
> This issue was discovered with ./scripts/checkkconfigsymbols.py, which
> reported that DEBUG_IMX21_IMX27_UART depends on the non-existing config
> SOC_IMX21.
> 
> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>

Applied, thanks!
diff mbox series

Patch

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 87aa6e92ee6e..7dad01729683 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -410,12 +410,12 @@  choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX25.
 
-	config DEBUG_IMX21_IMX27_UART
-		bool "i.MX21 and i.MX27 Debug UART"
-		depends on SOC_IMX21 || SOC_IMX27
+	config DEBUG_IMX27_UART
+		bool "i.MX27 Debug UART"
+		depends on SOC_IMX27
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on i.MX21 or i.MX27.
+		  on i.MX27.
 
 	config DEBUG_IMX28_UART
 		bool "i.MX28 Debug UART"
@@ -1481,7 +1481,7 @@  config DEBUG_IMX_UART_PORT
 	int "i.MX Debug UART Port Selection"
 	depends on DEBUG_IMX1_UART || \
 		   DEBUG_IMX25_UART || \
-		   DEBUG_IMX21_IMX27_UART || \
+		   DEBUG_IMX27_UART || \
 		   DEBUG_IMX31_UART || \
 		   DEBUG_IMX35_UART || \
 		   DEBUG_IMX50_UART || \
@@ -1540,12 +1540,12 @@  config DEBUG_LL_INCLUDE
 	default "debug/icedcc.S" if DEBUG_ICEDCC
 	default "debug/imx.S" if DEBUG_IMX1_UART || \
 				 DEBUG_IMX25_UART || \
-				 DEBUG_IMX21_IMX27_UART || \
+				 DEBUG_IMX27_UART || \
 				 DEBUG_IMX31_UART || \
 				 DEBUG_IMX35_UART || \
 				 DEBUG_IMX50_UART || \
 				 DEBUG_IMX51_UART || \
-				 DEBUG_IMX53_UART ||\
+				 DEBUG_IMX53_UART || \
 				 DEBUG_IMX6Q_UART || \
 				 DEBUG_IMX6SL_UART || \
 				 DEBUG_IMX6SX_UART || \
diff --git a/arch/arm/include/debug/imx-uart.h b/arch/arm/include/debug/imx-uart.h
index c8eb83d4b896..3edbb3c5b42b 100644
--- a/arch/arm/include/debug/imx-uart.h
+++ b/arch/arm/include/debug/imx-uart.h
@@ -11,13 +11,6 @@ 
 #define IMX1_UART_BASE_ADDR(n)	IMX1_UART##n##_BASE_ADDR
 #define IMX1_UART_BASE(n)	IMX1_UART_BASE_ADDR(n)
 
-#define IMX21_UART1_BASE_ADDR	0x1000a000
-#define IMX21_UART2_BASE_ADDR	0x1000b000
-#define IMX21_UART3_BASE_ADDR	0x1000c000
-#define IMX21_UART4_BASE_ADDR	0x1000d000
-#define IMX21_UART_BASE_ADDR(n)	IMX21_UART##n##_BASE_ADDR
-#define IMX21_UART_BASE(n)	IMX21_UART_BASE_ADDR(n)
-
 #define IMX25_UART1_BASE_ADDR	0x43f90000
 #define IMX25_UART2_BASE_ADDR	0x43f94000
 #define IMX25_UART3_BASE_ADDR	0x5000c000
@@ -26,6 +19,13 @@ 
 #define IMX25_UART_BASE_ADDR(n)	IMX25_UART##n##_BASE_ADDR
 #define IMX25_UART_BASE(n)	IMX25_UART_BASE_ADDR(n)
 
+#define IMX27_UART1_BASE_ADDR	0x1000a000
+#define IMX27_UART2_BASE_ADDR	0x1000b000
+#define IMX27_UART3_BASE_ADDR	0x1000c000
+#define IMX27_UART4_BASE_ADDR	0x1000d000
+#define IMX27_UART_BASE_ADDR(n)	IMX27_UART##n##_BASE_ADDR
+#define IMX27_UART_BASE(n)	IMX27_UART_BASE_ADDR(n)
+
 #define IMX31_UART1_BASE_ADDR	0x43f90000
 #define IMX31_UART2_BASE_ADDR	0x43f94000
 #define IMX31_UART3_BASE_ADDR	0x5000c000
@@ -112,10 +112,10 @@ 
 
 #ifdef CONFIG_DEBUG_IMX1_UART
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX1)
-#elif defined(CONFIG_DEBUG_IMX21_IMX27_UART)
-#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX21)
 #elif defined(CONFIG_DEBUG_IMX25_UART)
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX25)
+#elif defined(CONFIG_DEBUG_IMX27_UART)
+#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX27)
 #elif defined(CONFIG_DEBUG_IMX31_UART)
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX31)
 #elif defined(CONFIG_DEBUG_IMX35_UART)