@@ -621,21 +621,25 @@ static const struct of_device_id wmt_dt_ids[] = {
static int vt8500_serial_probe(struct platform_device *pdev)
{
struct vt8500_port *vt8500_port;
- struct resource *mmres, *irqres;
+ struct resource *mmres;
struct device_node *np = pdev->dev.of_node;
const unsigned int *flags;
int ret;
int port;
+ int irq;
flags = of_device_get_match_data(&pdev->dev);
if (!flags)
return -EINVAL;
mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- irqres = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!mmres || !irqres)
+ if (!mmres)
return -ENODEV;
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
if (np) {
port = of_alias_get_id(np, "serial");
if (port >= VT8500_MAX_PORTS)
@@ -688,7 +692,7 @@ static int vt8500_serial_probe(struct platform_device *pdev)
vt8500_port->uart.type = PORT_VT8500;
vt8500_port->uart.iotype = UPIO_MEM;
vt8500_port->uart.mapbase = mmres->start;
- vt8500_port->uart.irq = irqres->start;
+ vt8500_port->uart.irq = irq;
vt8500_port->uart.fifosize = 16;
vt8500_port->uart.ops = &vt8500_uart_pops;
vt8500_port->uart.line = port;
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> --- drivers/tty/serial/vt8500_serial.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)