| Message ID | 20230319191814.22067-12-ansuelsmth@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | net: Add basic LED support for switch/phy | expand |
On Sun, Mar 19, 2023 at 08:18:10PM +0100, Christian Marangi wrote: > Add LEDs definition example for qca8k Switch Family to describe how they > should be defined for a correct usage. > > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> > --- > .../devicetree/bindings/net/dsa/qca8k.yaml | 24 +++++++++++++++++++ > 1 file changed, 24 insertions(+) > > diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml > index 389892592aac..2e9c14af0223 100644 > --- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml > +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml > @@ -18,6 +18,8 @@ description: > PHY it is connected to. In this config, an internal mdio-bus is registered and > the MDIO master is used for communication. Mixed external and internal > mdio-bus configurations are not supported by the hardware. > + Each phy has at least 3 LEDs connected and can be declared > + using the standard LEDs structure. > > properties: > compatible: > @@ -117,6 +119,7 @@ unevaluatedProperties: false > examples: > - | > #include <dt-bindings/gpio/gpio.h> > + #include <dt-bindings/leds/common.h> > > mdio { > #address-cells = <1>; > @@ -226,6 +229,27 @@ examples: > label = "lan1"; > phy-mode = "internal"; > phy-handle = <&internal_phy_port1>; > + > + leds { > + #address-cells = <1>; > + #size-cells = <0>; > + > + led@0 { > + reg = <0>; Once 'unevaluatedProperties' is properly implemented in the schema, this will be a warning. You didn't define 'reg' in the schema. > + color = <LED_COLOR_ID_WHITE>; > + function = LED_FUNCTION_LAN; > + function-enumerator = <1>; > + default-state = "keep"; > + }; > + > + led@1 { > + reg = <1>; > + color = <LED_COLOR_ID_AMBER>; > + function = LED_FUNCTION_LAN; > + function-enumerator = <1>; > + default-state = "keep"; > + }; > + }; > }; > > port@2 { > -- > 2.39.2 >
diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml index 389892592aac..2e9c14af0223 100644 --- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml @@ -18,6 +18,8 @@ description: PHY it is connected to. In this config, an internal mdio-bus is registered and the MDIO master is used for communication. Mixed external and internal mdio-bus configurations are not supported by the hardware. + Each phy has at least 3 LEDs connected and can be declared + using the standard LEDs structure. properties: compatible: @@ -117,6 +119,7 @@ unevaluatedProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/leds/common.h> mdio { #address-cells = <1>; @@ -226,6 +229,27 @@ examples: label = "lan1"; phy-mode = "internal"; phy-handle = <&internal_phy_port1>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_LAN; + function-enumerator = <1>; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_LAN; + function-enumerator = <1>; + default-state = "keep"; + }; + }; }; port@2 {
Add LEDs definition example for qca8k Switch Family to describe how they should be defined for a correct usage. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> --- .../devicetree/bindings/net/dsa/qca8k.yaml | 24 +++++++++++++++++++ 1 file changed, 24 insertions(+)