diff mbox series

[v6,2/5] dt-bindings: display: bridge: ldb: Adjust imx6sx entries

Message ID 20230522201404.660242-2-festevam@gmail.com (mailing list archive)
State New, archived
Headers show
Series [v6,1/5] PCI: imx6: Use a more specific i.MX6SX GPR compatible | expand

Commit Message

Fabio Estevam May 22, 2023, 8:14 p.m. UTC
From: Fabio Estevam <festevam@denx.de>

On the i.MX6SX there is a single entry for 'reg', so add some logic to
reflect that.

Signed-off-by: Fabio Estevam <festevam@denx.de>
---
Dependency: This depends on bd60d98a11da ("dt-bindings: display: bridge: ldb: Adjust imx6sx entries"),
which is available on linux-next.

Changes since v5:
- Dropped reg-names for imx6sx (Marek).
- Indicated the dependency to avoid error when Rob's robot runs.

 .../bindings/display/bridge/fsl,ldb.yaml      | 24 ++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

Comments

Conor Dooley May 22, 2023, 10:06 p.m. UTC | #1
On Mon, May 22, 2023 at 05:14:01PM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <festevam@denx.de>
> 
> On the i.MX6SX there is a single entry for 'reg', so add some logic to
> reflect that.
> 
> Signed-off-by: Fabio Estevam <festevam@denx.de>

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

Thanks,
Conor.
Marek Vasut May 23, 2023, 2:27 a.m. UTC | #2
On 5/22/23 22:14, Fabio Estevam wrote:
> From: Fabio Estevam <festevam@denx.de>
> 
> On the i.MX6SX there is a single entry for 'reg', so add some logic to
> reflect that.
> 
> Signed-off-by: Fabio Estevam <festevam@denx.de>

Reviewed-by: Marek Vasut <marex@denx.de>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml
index 07388bf2b90d..7ff45e3d4929 100644
--- a/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml
@@ -28,12 +28,11 @@  properties:
     const: ldb
 
   reg:
+    minItems: 1
     maxItems: 2
 
   reg-names:
-    items:
-      - const: ldb
-      - const: lvds
+    maxItems: 2
 
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
@@ -57,6 +56,7 @@  properties:
 
 required:
   - compatible
+  - reg
   - clocks
   - ports
 
@@ -74,6 +74,24 @@  allOf:
           properties:
             port@2: false
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx6sx-ldb
+    then:
+      properties:
+        reg:
+          maxItems: 1
+    else:
+      properties:
+        reg:
+          minItems: 2
+        reg-names:
+          items:
+            - const: ldb
+            - const: lvds
+
 additionalProperties: false
 
 examples: