| Message ID | 20230719114328.2239818-3-andrej.picej@norik.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2,1/3] ARM: dts: imx6: phytec: fix RTC interrupt level | expand |
Hi Andrej, On Wed, 2023-07-19 at 13:43 +0200, Andrej Picej wrote: > Due to the missing signal connection between i.MX6 WDOG_B pin and the > PMICs external reset, the internal i.MX6 watchdog is not able to reset > the phyCORE i.MX6 SoM properly. Thus disable the internal i.MX6 watchdog > to prevent unexpected PMIC settings after reset. > > NOTE: This patch should not be backported as it might break existing > uses and fixes in bootloaders. > > Signed-off-by: Andrej Picej <andrej.picej@norik.com> Reviewed-by: Stefan Riedmüller <s.riedmueller@phytec.de> > --- > Changes in v2: > - new patch > - i.MX6 phyCOREs have the same problem as phyFLEX devices. > --- > arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi > b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi > index 28a805384668..86b4269e0e01 100644 > --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi > +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi > @@ -309,3 +309,11 @@ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 > >; > }; > }; > + > +&wdog1 { > + /* > + * Rely on PMIC reboot handler. Internal i.MX6 watchdog, that is > also > + * used for reboot, does not reset all external PMIC voltages on > reset. > + */ > + status = "disabled"; > +};
On Wed, Jul 19, 2023 at 01:43:28PM +0200, Andrej Picej wrote: > Due to the missing signal connection between i.MX6 WDOG_B pin and the > PMICs external reset, the internal i.MX6 watchdog is not able to reset > the phyCORE i.MX6 SoM properly. Thus disable the internal i.MX6 watchdog > to prevent unexpected PMIC settings after reset. > > NOTE: This patch should not be backported as it might break existing > uses and fixes in bootloaders. > > Signed-off-by: Andrej Picej <andrej.picej@norik.com> Applied, thanks!
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi index 28a805384668..86b4269e0e01 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi @@ -309,3 +309,11 @@ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 >; }; }; + +&wdog1 { + /* + * Rely on PMIC reboot handler. Internal i.MX6 watchdog, that is also + * used for reboot, does not reset all external PMIC voltages on reset. + */ + status = "disabled"; +};
Due to the missing signal connection between i.MX6 WDOG_B pin and the PMICs external reset, the internal i.MX6 watchdog is not able to reset the phyCORE i.MX6 SoM properly. Thus disable the internal i.MX6 watchdog to prevent unexpected PMIC settings after reset. NOTE: This patch should not be backported as it might break existing uses and fixes in bootloaders. Signed-off-by: Andrej Picej <andrej.picej@norik.com> --- Changes in v2: - new patch - i.MX6 phyCOREs have the same problem as phyFLEX devices. --- arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)