diff mbox series

[v8,26/26] arm64: dts: rockchip: rk3588s: Add DFI

Message ID 20231018061714.3553817-27-s.hauer@pengutronix.de (mailing list archive)
State New, archived
Headers show
Series Add perf support to the rockchip-dfi driver | expand

Commit Message

Sascha Hauer Oct. 18, 2023, 6:17 a.m. UTC
The DFI unit can be used to measure DRAM utilization using perf. Add the
node to the device tree. The DFI needs a rockchip,pmu phandle to the pmu
containing registers for SDRAM configuration details. This is added in
this patch as well.

Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---

Notes:
    Changes since v4:
     - new patch

 arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

Comments

Jagan Teki Nov. 23, 2023, 9:38 a.m. UTC | #1
On Wed, 18 Oct 2023 at 11:47, Sascha Hauer <s.hauer@pengutronix.de> wrote:
>
> The DFI unit can be used to measure DRAM utilization using perf. Add the
> node to the device tree. The DFI needs a rockchip,pmu phandle to the pmu
> containing registers for SDRAM configuration details. This is added in
> this patch as well.
>
> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>
> Notes:
>     Changes since v4:
>      - new patch
>
>  arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
> index 5544f66c6ff41..e693a341f6f27 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
> @@ -443,6 +443,11 @@ usb_host1_ohci: usb@fc8c0000 {
>                 status = "disabled";
>         };
>
> +       pmu1grf: syscon@fd58a000 {
> +               compatible = "rockchip,rk3588-pmugrf", "syscon", "simple-mfd";
> +               reg = <0x0 0xfd58a000 0x0 0x10000>;
> +       };
> +
>         sys_grf: syscon@fd58c000 {
>                 compatible = "rockchip,rk3588-sys-grf", "syscon";
>                 reg = <0x0 0xfd58c000 0x0 0x1000>;
> @@ -1329,6 +1334,17 @@ pcie2x1l2_intc: legacy-interrupt-controller {
>                 };
>         };
>
> +       dfi: dfi@fe060000 {
> +               reg = <0x00 0xfe060000 0x00 0x10000>;
> +               compatible = "rockchip,rk3588-dfi";
> +               interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>,
> +                            <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>;
> +               interrupt-names = "ch0", "ch1", "ch2", "ch3";

Look like the names never documented and nor supported explicitly in
the driver. Do we have any patch for fixing it in the mailing-list?

arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dtb:
dfi@fe060000: 'interrupt-names' does not match any of the regexes:
'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/devfreq/event/rockchip,dfi.yaml#

Jagan.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
index 5544f66c6ff41..e693a341f6f27 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
@@ -443,6 +443,11 @@  usb_host1_ohci: usb@fc8c0000 {
 		status = "disabled";
 	};
 
+	pmu1grf: syscon@fd58a000 {
+		compatible = "rockchip,rk3588-pmugrf", "syscon", "simple-mfd";
+		reg = <0x0 0xfd58a000 0x0 0x10000>;
+	};
+
 	sys_grf: syscon@fd58c000 {
 		compatible = "rockchip,rk3588-sys-grf", "syscon";
 		reg = <0x0 0xfd58c000 0x0 0x1000>;
@@ -1329,6 +1334,17 @@  pcie2x1l2_intc: legacy-interrupt-controller {
 		};
 	};
 
+	dfi: dfi@fe060000 {
+		reg = <0x00 0xfe060000 0x00 0x10000>;
+		compatible = "rockchip,rk3588-dfi";
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "ch0", "ch1", "ch2", "ch3";
+		rockchip,pmu = <&pmu1grf>;
+	};
+
 	gmac1: ethernet@fe1c0000 {
 		compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a";
 		reg = <0x0 0xfe1c0000 0x0 0x10000>;