diff mbox series

[v5,1/2] pwm: meson: Add support for Amlogic S4 PWM

Message ID 20240521-s4-pwm-v5-1-0c91f5fa32cd@amlogic.com (mailing list archive)
State New, archived
Headers show
Series Add support for Amlogic S4 PWM | expand

Commit Message

Kelvin Zhang via B4 Relay May 21, 2024, 8:31 a.m. UTC
From: Junyi Zhao <junyi.zhao@amlogic.com>

This patch adds support for Amlogic S4 PWM.

Signed-off-by: Junyi Zhao <junyi.zhao@amlogic.com>
Signed-off-by: Kelvin Zhang <kelvin.zhang@amlogic.com>
---
 drivers/pwm/pwm-meson.c | 53 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)

Comments

George Stark May 21, 2024, 6:50 p.m. UTC | #1
Hello Kelvin, Junyi

On 5/21/24 11:31, Kelvin Zhang via B4 Relay wrote:
> From: Junyi Zhao <junyi.zhao@amlogic.com>
> 
> This patch adds support for Amlogic S4 PWM.

Please take a look at 
https://www.kernel.org/doc/html/v6.9/process/submitting-patches.html#describe-your-changes

It should be something like
Add support for Amlogic S4 PWM.


> 
> Signed-off-by: Junyi Zhao <junyi.zhao@amlogic.com>
> Signed-off-by: Kelvin Zhang <kelvin.zhang@amlogic.com>
> ---
>   drivers/pwm/pwm-meson.c | 53 +++++++++++++++++++++++++++++++++++++++++++++++++
>   1 file changed, 53 insertions(+)
> 
> diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
> index b2f97dfb01bb..9fea28a51921 100644
> --- a/drivers/pwm/pwm-meson.c
> +++ b/drivers/pwm/pwm-meson.c
> @@ -460,6 +460,51 @@ static int meson_pwm_init_channels_meson8b_v2(struct pwm_chip *chip)
>   	return meson_pwm_init_clocks_meson8b(chip, mux_parent_data);
>   }
>   
> +static void meson_pwm_s4_put_clk(void *data)
> +{
> +	int i;
> +	struct meson_pwm *meson;
> +	struct meson_pwm_channel *channel;
> +
> +	meson = (struct meson_pwm *)data;
You can initialize meson variable along with declaration; type casting 
is not needed

> +	for (i = 0; i < MESON_NUM_PWMS; i++) {
> +		channel = &meson->channels[i];
> +		clk_put(channel->clk);
> +	}
you can save 3 lines just by using clk_put(meson->channels[i].clk);

> +}
> +
> +static int meson_pwm_init_channels_meson_s4(struct pwm_chip *chip)
> +{
> +	int i, ret;
> +	struct device *dev = pwmchip_parent(chip);
> +	struct device_node *np = dev->of_node;
> +	struct meson_pwm *meson = to_meson_pwm(chip);
> +	struct meson_pwm_channel *channel;
> +
> +	for (i = 0; i < MESON_NUM_PWMS; i++) {
> +		channel = &meson->channels[i];
> +		channel->clk = of_clk_get(np, i);
> +		if (IS_ERR(channel->clk)) {
> +			ret = PTR_ERR(channel->clk);
> +			dev_err_probe(dev, ret, "Failed to get clk\n");
> +			goto err;
> +		}
> +	}
> +	ret = devm_add_action_or_reset(dev, meson_pwm_s4_put_clk, meson);
> +	if (ret)
> +		return ret;
> +
> +	return 0;
> +
> +err:
> +	while (--i >= 0) {
> +		channel = &meson->channels[i];
> +		clk_put(channel->clk);
> +	}
> +
> +	return ret;
> +}
> +
>   static const struct meson_pwm_data pwm_meson8b_data = {
>   	.parent_names = { "xtal", NULL, "fclk_div4", "fclk_div3" },
>   	.channels_init = meson_pwm_init_channels_meson8b_legacy,
> @@ -498,6 +543,10 @@ static const struct meson_pwm_data pwm_meson8_v2_data = {
>   	.channels_init = meson_pwm_init_channels_meson8b_v2,
>   };
>   
> +static const struct meson_pwm_data pwm_meson_s4_data = {
> +	.channels_init = meson_pwm_init_channels_meson_s4,
> +};
> +
according to already existing soc-specific named vars and functions
new names should be
static const struct meson_pwm_data pwm_s4_data
and
static int meson_pwm_init_channels_s4(struct pwm_chip *chip)

>   static const struct of_device_id meson_pwm_matches[] = {
>   	{
>   		.compatible = "amlogic,meson8-pwm-v2",
> @@ -536,6 +585,10 @@ static const struct of_device_id meson_pwm_matches[] = {
>   		.compatible = "amlogic,meson-g12a-ao-pwm-cd",
>   		.data = &pwm_g12a_ao_cd_data
>   	},
> +	{
> +		.compatible = "amlogic,meson-s4-pwm",
> +		.data = &pwm_meson_s4_data
> +	},
>   	{},
>   };
>   MODULE_DEVICE_TABLE(of, meson_pwm_matches);
>
Junyi Zhao May 22, 2024, 6:02 a.m. UTC | #2
On 2024/5/22 2:50, George Stark wrote:
> [ EXTERNAL EMAIL ]
> 
> Hello Kelvin, Junyi
> 
> On 5/21/24 11:31, Kelvin Zhang via B4 Relay wrote:
>> From: Junyi Zhao <junyi.zhao@amlogic.com>
>>
>> This patch adds support for Amlogic S4 PWM.
> 
> Please take a look at
> https://www.kernel.org/doc/html/v6.9/process/submitting-patches.html#describe-your-changes
> 
> It should be something like
> Add support for Amlogic S4 PWM.
> 
> 
>>
>> Signed-off-by: Junyi Zhao <junyi.zhao@amlogic.com>
>> Signed-off-by: Kelvin Zhang <kelvin.zhang@amlogic.com>
>> ---
>>   drivers/pwm/pwm-meson.c | 53 
>> +++++++++++++++++++++++++++++++++++++++++++++++++
>>   1 file changed, 53 insertions(+)
>>
>> diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
>> index b2f97dfb01bb..9fea28a51921 100644
>> --- a/drivers/pwm/pwm-meson.c
>> +++ b/drivers/pwm/pwm-meson.c
>> @@ -460,6 +460,51 @@ static int 
>> meson_pwm_init_channels_meson8b_v2(struct pwm_chip *chip)
>>       return meson_pwm_init_clocks_meson8b(chip, mux_parent_data);
>>   }
>>
>> +static void meson_pwm_s4_put_clk(void *data)
>> +{
>> +     int i;
>> +     struct meson_pwm *meson;
>> +     struct meson_pwm_channel *channel;
>> +
>> +     meson = (struct meson_pwm *)data;
> You can initialize meson variable along with declaration; type casting
> is not needed
> 
>> +     for (i = 0; i < MESON_NUM_PWMS; i++) {
>> +             channel = &meson->channels[i];
>> +             clk_put(channel->clk);
>> +     }
> you can save 3 lines just by using clk_put(meson->channels[i].clk);
> 
>> +}
>> +
>> +static int meson_pwm_init_channels_meson_s4(struct pwm_chip *chip)
>> +{
>> +     int i, ret;
>> +     struct device *dev = pwmchip_parent(chip);
>> +     struct device_node *np = dev->of_node;
>> +     struct meson_pwm *meson = to_meson_pwm(chip);
>> +     struct meson_pwm_channel *channel;
>> +
>> +     for (i = 0; i < MESON_NUM_PWMS; i++) {
>> +             channel = &meson->channels[i];
>> +             channel->clk = of_clk_get(np, i);
>> +             if (IS_ERR(channel->clk)) {
>> +                     ret = PTR_ERR(channel->clk);
>> +                     dev_err_probe(dev, ret, "Failed to get clk\n");
>> +                     goto err;
>> +             }
>> +     }
>> +     ret = devm_add_action_or_reset(dev, meson_pwm_s4_put_clk, meson);
>> +     if (ret)
>> +             return ret;
>> +
>> +     return 0;
>> +
>> +err:
>> +     while (--i >= 0) {
>> +             channel = &meson->channels[i];
>> +             clk_put(channel->clk);
>> +     }
>> +
>> +     return ret;
>> +}
>> +
>>   static const struct meson_pwm_data pwm_meson8b_data = {
>>       .parent_names = { "xtal", NULL, "fclk_div4", "fclk_div3" },
>>       .channels_init = meson_pwm_init_channels_meson8b_legacy,
>> @@ -498,6 +543,10 @@ static const struct meson_pwm_data 
>> pwm_meson8_v2_data = {
>>       .channels_init = meson_pwm_init_channels_meson8b_v2,
>>   };
>>
>> +static const struct meson_pwm_data pwm_meson_s4_data = {
>> +     .channels_init = meson_pwm_init_channels_meson_s4,
>> +};
>> +
> according to already existing soc-specific named vars and functions
> new names should be
> static const struct meson_pwm_data pwm_s4_data
> and
> static int meson_pwm_init_channels_s4(struct pwm_chip *chip)
> 
>>   static const struct of_device_id meson_pwm_matches[] = {
>>       {
>>               .compatible = "amlogic,meson8-pwm-v2",
>> @@ -536,6 +585,10 @@ static const struct of_device_id 
>> meson_pwm_matches[] = {
>>               .compatible = "amlogic,meson-g12a-ao-pwm-cd",
>>               .data = &pwm_g12a_ao_cd_data
>>       },
>> +     {
>> +             .compatible = "amlogic,meson-s4-pwm",
>> +             .data = &pwm_meson_s4_data
>> +     },
>>       {},
>>   };
>>   MODULE_DEVICE_TABLE(of, meson_pwm_matches);
>>
> 
> -- 
> Best regards
> George
Thks for your suggestion. i will check it.
--
Junyi
diff mbox series

Patch

diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
index b2f97dfb01bb..9fea28a51921 100644
--- a/drivers/pwm/pwm-meson.c
+++ b/drivers/pwm/pwm-meson.c
@@ -460,6 +460,51 @@  static int meson_pwm_init_channels_meson8b_v2(struct pwm_chip *chip)
 	return meson_pwm_init_clocks_meson8b(chip, mux_parent_data);
 }
 
+static void meson_pwm_s4_put_clk(void *data)
+{
+	int i;
+	struct meson_pwm *meson;
+	struct meson_pwm_channel *channel;
+
+	meson = (struct meson_pwm *)data;
+	for (i = 0; i < MESON_NUM_PWMS; i++) {
+		channel = &meson->channels[i];
+		clk_put(channel->clk);
+	}
+}
+
+static int meson_pwm_init_channels_meson_s4(struct pwm_chip *chip)
+{
+	int i, ret;
+	struct device *dev = pwmchip_parent(chip);
+	struct device_node *np = dev->of_node;
+	struct meson_pwm *meson = to_meson_pwm(chip);
+	struct meson_pwm_channel *channel;
+
+	for (i = 0; i < MESON_NUM_PWMS; i++) {
+		channel = &meson->channels[i];
+		channel->clk = of_clk_get(np, i);
+		if (IS_ERR(channel->clk)) {
+			ret = PTR_ERR(channel->clk);
+			dev_err_probe(dev, ret, "Failed to get clk\n");
+			goto err;
+		}
+	}
+	ret = devm_add_action_or_reset(dev, meson_pwm_s4_put_clk, meson);
+	if (ret)
+		return ret;
+
+	return 0;
+
+err:
+	while (--i >= 0) {
+		channel = &meson->channels[i];
+		clk_put(channel->clk);
+	}
+
+	return ret;
+}
+
 static const struct meson_pwm_data pwm_meson8b_data = {
 	.parent_names = { "xtal", NULL, "fclk_div4", "fclk_div3" },
 	.channels_init = meson_pwm_init_channels_meson8b_legacy,
@@ -498,6 +543,10 @@  static const struct meson_pwm_data pwm_meson8_v2_data = {
 	.channels_init = meson_pwm_init_channels_meson8b_v2,
 };
 
+static const struct meson_pwm_data pwm_meson_s4_data = {
+	.channels_init = meson_pwm_init_channels_meson_s4,
+};
+
 static const struct of_device_id meson_pwm_matches[] = {
 	{
 		.compatible = "amlogic,meson8-pwm-v2",
@@ -536,6 +585,10 @@  static const struct of_device_id meson_pwm_matches[] = {
 		.compatible = "amlogic,meson-g12a-ao-pwm-cd",
 		.data = &pwm_g12a_ao_cd_data
 	},
+	{
+		.compatible = "amlogic,meson-s4-pwm",
+		.data = &pwm_meson_s4_data
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, meson_pwm_matches);