diff mbox series

[v2,06/13] ARM: dts: sun5i: Fix Display Engine DTC warnings

Message ID 3db85b8a022d982ac479a596e78d870fe9e948f2.1552594551.git-series.maxime.ripard@bootlin.com (mailing list archive)
State New, archived
Headers show
Series ARM: dts: sunxi: Cleanup DTC warnings | expand

Commit Message

Maxime Ripard March 14, 2019, 8:16 p.m. UTC
Our display engine endpoints trigger some DTC warnings due to the fact that
we're having a single endpoint that doesn't need any reg property, and
since we don't have a reg property, we don't need the address-cells and
size-cells properties anymore.

Fix those

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
 arch/arm/boot/dts/sun5i-a13-olinuxino.dts |  2 --
 arch/arm/boot/dts/sun5i-a13-q8-tablet.dts | 11 ++---------
 2 files changed, 2 insertions(+), 11 deletions(-)

Comments

Chen-Yu Tsai March 15, 2019, 2:30 a.m. UTC | #1
On Fri, Mar 15, 2019 at 4:16 AM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
>
> Our display engine endpoints trigger some DTC warnings due to the fact that
> we're having a single endpoint that doesn't need any reg property, and
> since we don't have a reg property, we don't need the address-cells and
> size-cells properties anymore.
>
> Fix those
>
> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

Acked-by: Chen-Yu Tsai <wens@csie.org>
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
index 9409c232d48a..54ca140fc258 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -74,8 +74,6 @@ 
 
 	bridge {
 		compatible = "dumb-vga-dac";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		ports {
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts
index 7257f39b31ce..fde559a8b61e 100644
--- a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts
+++ b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts
@@ -53,16 +53,9 @@ 
 		power-supply = <&reg_vcc3v3>;
 		enable-gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>; /* AXP GPIO0 */
 		backlight = <&backlight>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		port@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			panel_input: endpoint@0 {
-				reg = <0>;
+		port {
+			panel_input: endpoint {
 				remote-endpoint = <&tcon0_out_lcd>;
 			};
 		};