[00/12] remoteproc: qcom: q6v5-wcss: Add support for secure pil

Message

Gokul Sriram Palanisamy July 11, 2019, 3:40 p.m. UTC

IPQ8074 needs support for secure pil as well.
Also, currently only unified firmware is supported.
IPQ8074 supports split firmware for q6 and m3, so
adding support for that.

Gokul Sriram Palanisamy (12):
  remoteproc: qcom: Add PRNG proxy clock
  remoteproc: qcom: Add secure PIL support
  remoteproc: qcom: Add support for split q6 + m3 wlan firmware
  remoteproc: qcom: Add ssr subdevice identifier
  remoteproc: qcom: Update regmap offsets for halt register
  dt-bindings: clock: qcom: Add reset for WCSSAON
  clk: qcom: Add WCSSAON reset
  dt-bindings: mailbox: qom: Add ipq8074 APPS compatible
  mailbox: qcom: Add support for IPQ8074 APCS
  dt-bindings: firmware: qcom: Add compatible for IPQ8074 SoC
  arm64: dts: Add support for scm on IPQ8074 SoCs
  arm64: dts: qcom: Enable Q6v5 WCSS for ipq8074 SoC

 .../devicetree/bindings/firmware/qcom,scm.txt      |   1 +
 .../bindings/mailbox/qcom,apcs-kpss-global.txt     |   1 +
 arch/arm64/boot/dts/qcom/ipq8074.dtsi              | 131 +++++++++++++++++
 drivers/clk/qcom/gcc-ipq8074.c                     |   1 +
 drivers/mailbox/qcom-apcs-ipc-mailbox.c            |   1 +
 drivers/remoteproc/qcom_q6v5_wcss.c                | 158 +++++++++++++++++----
 include/dt-bindings/clock/qcom,gcc-ipq8074.h       |   1 +
 7 files changed, 264 insertions(+), 30 deletions(-)

Comments

Gokul Sriram Palanisamy July 12, 2019, 5:43 a.m. UTC | #1

Hi,

On 2019-07-11 21:10, Gokul Sriram Palanisamy wrote:
> IPQ8074 needs support for secure pil as well.
> Also, currently only unified firmware is supported.
> IPQ8074 supports split firmware for q6 and m3, so
> adding support for that.
> 
> Gokul Sriram Palanisamy (12):
>   remoteproc: qcom: Add PRNG proxy clock
>   remoteproc: qcom: Add secure PIL support
>   remoteproc: qcom: Add support for split q6 + m3 wlan firmware
>   remoteproc: qcom: Add ssr subdevice identifier
>   remoteproc: qcom: Update regmap offsets for halt register
>   dt-bindings: clock: qcom: Add reset for WCSSAON
>   clk: qcom: Add WCSSAON reset
>   dt-bindings: mailbox: qom: Add ipq8074 APPS compatible
>   mailbox: qcom: Add support for IPQ8074 APCS
>   dt-bindings: firmware: qcom: Add compatible for IPQ8074 SoC
>   arm64: dts: Add support for scm on IPQ8074 SoCs
>   arm64: dts: qcom: Enable Q6v5 WCSS for ipq8074 SoC
> 

  Also, this series is based on Govind’s,
  “[v4] Add non PAS wcss Q6 support for QCS404”
  https://www.spinics.net/lists/linux-remoteproc/msg03612.html

Regards,
  Gokul


>  .../devicetree/bindings/firmware/qcom,scm.txt      |   1 +
>  .../bindings/mailbox/qcom,apcs-kpss-global.txt     |   1 +
>  arch/arm64/boot/dts/qcom/ipq8074.dtsi              | 131 
> +++++++++++++++++
>  drivers/clk/qcom/gcc-ipq8074.c                     |   1 +
>  drivers/mailbox/qcom-apcs-ipc-mailbox.c            |   1 +
>  drivers/remoteproc/qcom_q6v5_wcss.c                | 158 
> +++++++++++++++++----
>  include/dt-bindings/clock/qcom,gcc-ipq8074.h       |   1 +
>  7 files changed, 264 insertions(+), 30 deletions(-)