mbox series

[v2,00/13] Add device tree support for sc7180

Message ID 20191021065522.24511-1-rnayak@codeaurora.org (mailing list archive)
Headers show
Series Add device tree support for sc7180 | expand

Message

Rajendra Nayak Oct. 21, 2019, 6:55 a.m. UTC 
This is a collection of a few floating DT patches, and a few new
ones, adding support for basic peripherals on qualcomm's sc7180 SoC,
drivers for which are already upstream.

I have marked all as v2 to be consistent.
Each patch captures the delta if any from v1:

All the dts files have a dependency on gcc clock driver patches [1]
to merge first

[1] https://www.spinics.net/lists/linux-clk/msg41851.html

Kiran Gunda (3):
  arm64: dts: qcom: sc7180: Add SPMI PMIC arbiter device
  arm64: dts: qcom: pm6150: Add PM6150/PM6150L PMIC peripherals
  arm64: dts: qcom: sc7180-idp: Add RPMh regulators

Maulik Shah (4):
  arm64: dts: qcom: sc7180: Add cmd_db reserved area
  arm64: dts: qcom: sc7180: Add rpmh-rsc node
  drivers: irqchip: qcom-pdc: Add irqchip for sc7180
  arm64: dts: qcom: sc7180: Add pdc interrupt controller

Rajendra Nayak (4):
  dt-bindings: qcom: Add SC7180 bindings
  arm64: dts: sc7180: Add minimal dts/dtsi files for SC7180 soc
  dt-bindings: arm-smmu: update binding for qcom sc7180 SoC
  dt-bindings: qcom,pdc: Add compatible for sc7180

Taniya Das (1):
  arm64: dts: qcom: SC7180: Add node for rpmhcc clock driver

Vivek Gautam (1):
  arm64: dts: sc7180: Add device node for apps_smmu

 .../devicetree/bindings/arm/qcom.yaml         |   2 +
 .../interrupt-controller/qcom,pdc.txt         |   1 +
 .../devicetree/bindings/iommu/arm,smmu.txt    |   1 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 arch/arm64/boot/dts/qcom/pm6150.dtsi          |  85 ++++
 arch/arm64/boot/dts/qcom/pm6150l.dtsi         |  47 ++
 arch/arm64/boot/dts/qcom/sc7180-idp.dts       | 256 ++++++++++
 arch/arm64/boot/dts/qcom/sc7180.dtsi          | 459 ++++++++++++++++++
 drivers/irqchip/qcom-pdc.c                    |   1 +
 9 files changed, 853 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/pm6150.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/pm6150l.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/sc7180-idp.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sc7180.dtsi