mbox series

[v6,00/11] drm/msm: add support for SM8450

Message ID 20221207012231.112059-1-dmitry.baryshkov@linaro.org (mailing list archive)
Headers show
Series drm/msm: add support for SM8450 | expand

Message

Dmitry Baryshkov Dec. 7, 2022, 1:22 a.m. UTC
This adds support for the MDSS/DPU/DSI on the Qualcomm SM8450 platform.

Change since v5:
- Added defines to be used for the MDP_PERIPH_TOP0 blackhole

Change since v4:
- Fixed commit messages for the first two patches (Krzysztof)
- Dropped clock-names requirement patch
- Removed clock-names from qcom,sm8450-mdss.yaml schema
- Fixed the schema changes lost between v3 and v4 (thanks Krzysztof)
- Added kernel doc for DPU_MDP_PERIPH_0_REMOVED (Abhinav)
- Fixed build issue in dpu_kms_mdp_snapshot() (Niel)

Change since v3:
- Reworked the dpu-common.yaml / mdss-common.yaml to require properties
  from the same schema where they are defined (Krzysztof)
- Reworked PHY register settings to make it easier to understand
  (Konrad)

Change since v2:
- Rebased onto msm-next-lumag
- Cleaned up bindings according to Krzysztof's suggestions

Change since v1:
- Fixed the regdma pointer in sm8450_dpu_cfg
- Rebased onto pending msm-next-lumag
- Added DT bindings for corresponding devices

Dmitry Baryshkov (11):
  dt-bindings: display/msm: *dpu.yaml: split required properties clauses
  dt-bindings: display/msm: *mdss.yaml: split required properties
    clauses
  dt-bindings: display/msm: add sm8350 and sm8450 DSI PHYs
  dt-bindings: display/msm: add support for the display on SM8450
  drm/msm/dsi/phy: rework register setting for 7nm PHY
  drm/msm/dsi: add support for DSI-PHY on SM8350 and SM8450
  drm/msm/dsi: add support for DSI 2.6.0
  drm/msm/dpu: merge all MDP TOP registers to dpu_hwio.h
  drm/msm/dpu: add support for MDP_TOP blackhole
  drm/msm/dpu: add support for SM8450
  drm/msm: mdss add support for SM8450

 .../bindings/display/msm/dpu-common.yaml      |   4 -
 .../bindings/display/msm/dsi-phy-7nm.yaml     |   2 +
 .../bindings/display/msm/mdss-common.yaml     |   1 -
 .../display/msm/qcom,msm8998-dpu.yaml         |   7 +
 .../display/msm/qcom,msm8998-mdss.yaml        |   3 +
 .../display/msm/qcom,qcm2290-dpu.yaml         |   7 +
 .../display/msm/qcom,qcm2290-mdss.yaml        |   3 +
 .../bindings/display/msm/qcom,sc7180-dpu.yaml |   7 +
 .../display/msm/qcom,sc7180-mdss.yaml         |   3 +
 .../bindings/display/msm/qcom,sc7280-dpu.yaml |   7 +
 .../display/msm/qcom,sc7280-mdss.yaml         |   3 +
 .../bindings/display/msm/qcom,sdm845-dpu.yaml |   7 +
 .../display/msm/qcom,sdm845-mdss.yaml         |   3 +
 .../bindings/display/msm/qcom,sm8250-dpu.yaml |   7 +
 .../display/msm/qcom,sm8250-mdss.yaml         |   3 +
 .../bindings/display/msm/qcom,sm8450-dpu.yaml | 139 +++++++
 .../display/msm/qcom,sm8450-mdss.yaml         | 343 ++++++++++++++++++
 drivers/gpu/drm/msm/Kconfig                   |   6 +-
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    | 224 ++++++++++++
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    |   4 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h   |   3 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c    |  25 --
 drivers/gpu/drm/msm/disp/dpu1/dpu_hwio.h      |  21 ++
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       |  12 +-
 drivers/gpu/drm/msm/dsi/dsi_cfg.c             |   2 +
 drivers/gpu/drm/msm/dsi/dsi_cfg.h             |   1 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.c         |   4 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.h         |   2 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c     | 141 +++++--
 drivers/gpu/drm/msm/msm_mdss.c                |   5 +
 30 files changed, 943 insertions(+), 56 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml
 create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml

Comments

Dmitry Baryshkov Jan. 9, 2023, 10:41 p.m. UTC | #1
On Wed, 07 Dec 2022 03:22:20 +0200, Dmitry Baryshkov wrote:
> This adds support for the MDSS/DPU/DSI on the Qualcomm SM8450 platform.
> 
> Change since v5:
> - Added defines to be used for the MDP_PERIPH_TOP0 blackhole
> 
> Change since v4:
> - Fixed commit messages for the first two patches (Krzysztof)
> - Dropped clock-names requirement patch
> - Removed clock-names from qcom,sm8450-mdss.yaml schema
> - Fixed the schema changes lost between v3 and v4 (thanks Krzysztof)
> - Added kernel doc for DPU_MDP_PERIPH_0_REMOVED (Abhinav)
> - Fixed build issue in dpu_kms_mdp_snapshot() (Niel)
> 
> [...]

Applied, thanks!

[01/11] dt-bindings: display/msm: *dpu.yaml: split required properties clauses
        https://gitlab.freedesktop.org/lumag/msm/-/commit/0f87fc933e0c
[02/11] dt-bindings: display/msm: *mdss.yaml: split required properties clauses
        https://gitlab.freedesktop.org/lumag/msm/-/commit/e96150a6dc14
[03/11] dt-bindings: display/msm: add sm8350 and sm8450 DSI PHYs
        https://gitlab.freedesktop.org/lumag/msm/-/commit/44a9f577a087
[04/11] dt-bindings: display/msm: add support for the display on SM8450
        https://gitlab.freedesktop.org/lumag/msm/-/commit/f7463946c281
[05/11] drm/msm/dsi/phy: rework register setting for 7nm PHY
        https://gitlab.freedesktop.org/lumag/msm/-/commit/1a1bd3f45000
[06/11] drm/msm/dsi: add support for DSI-PHY on SM8350 and SM8450
        https://gitlab.freedesktop.org/lumag/msm/-/commit/e50c901f93e0
[07/11] drm/msm/dsi: add support for DSI 2.6.0
        https://gitlab.freedesktop.org/lumag/msm/-/commit/1b55304af89c
[08/11] drm/msm/dpu: merge all MDP TOP registers to dpu_hwio.h
        https://gitlab.freedesktop.org/lumag/msm/-/commit/3bb86d2c6cba
[09/11] drm/msm/dpu: add support for MDP_TOP blackhole
        https://gitlab.freedesktop.org/lumag/msm/-/commit/ae7459d07d8a
[10/11] drm/msm/dpu: add support for SM8450
        https://gitlab.freedesktop.org/lumag/msm/-/commit/8cbbc3396065
[11/11] drm/msm: mdss add support for SM8450
        https://gitlab.freedesktop.org/lumag/msm/-/commit/4d285825f1b7

Best regards,