diff mbox series

[2/8] arm64: dts: qcom: sdm845: assign DSI clock source parents

Message ID 20210515131217.1540412-3-dmitry.baryshkov@linaro.org (mailing list archive)
State Superseded
Headers show
Series [1/8] arm64: dts: qcom: sc7180: assign DSI clock source parents | expand

Commit Message

Dmitry Baryshkov May 15, 2021, 1:12 p.m. UTC 
Assign DSI clock source parents to DSI PHY clocks.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Abhinav Kumar June 21, 2021, 10:08 p.m. UTC | #1 
On 2021-05-15 06:12, Dmitry Baryshkov wrote:
> Assign DSI clock source parents to DSI PHY clocks.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
> ---
>  arch/arm64/boot/dts/qcom/sdm845.dtsi | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index 454f794af547..2166549382c1 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -4113,6 +4113,9 @@ dsi0: dsi@ae94000 {
>  					      "core",
>  					      "iface",
>  					      "bus";
> +				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc
> DISP_CC_MDSS_PCLK0_CLK_SRC>;
> +				assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
> +
>  				operating-points-v2 = <&dsi_opp_table>;
>  				power-domains = <&rpmhpd SDM845_CX>;
> 
> @@ -4179,6 +4182,9 @@ dsi1: dsi@ae96000 {
>  					      "core",
>  					      "iface",
>  					      "bus";
> +				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc
> DISP_CC_MDSS_PCLK1_CLK_SRC>;
> +				assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
> +
>  				operating-points-v2 = <&dsi_opp_table>;
>  				power-domains = <&rpmhpd SDM845_CX>;
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 454f794af547..2166549382c1 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -4113,6 +4113,9 @@  dsi0: dsi@ae94000 {
 					      "core",
 					      "iface",
 					      "bus";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SDM845_CX>;
 
@@ -4179,6 +4182,9 @@  dsi1: dsi@ae96000 {
 					      "core",
 					      "iface",
 					      "bus";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SDM845_CX>;