| Message ID | 20220829094903.v2.2.I430a56702ab0af65244e62667bb7743107de0c96@changeid (mailing list archive) |
|---|---|
| State | Accepted, archived |
| Headers | show |
| Series | arm64: dts: qcom: Fix broken regulator spec on RPMH boards | expand |
On Mon, Aug 29, 2022 at 09:49:48AM -0700, Douglas Anderson wrote: > This board uses RPMH, specifies "regulator-allow-set-load" for LDOs, > but doesn't specify any modes with "regulator-allowed-modes". > > Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement > get_optimum_mode(), not set_load()") the above meant that we were able > to set either LPM or HPM mode. After that commit (and fixes [1]) we'll > be stuck at the initial mode. Discussion of this has resulted in the > decision that the old dts files were wrong and should be fixed to > fully restore old functionality. > > Let's re-enable the old functionality by fixing the dts. > > [1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid > > Fixes: 519183af39b2 ("arm64: dts: qcom: add SA8540P and ADP") > Signed-off-by: Douglas Anderson <dianders@chromium.org> > Reviewed-by: Andrew Halaney <ahalaney@redhat.com> > Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> > --- > > Changes in v2: > - Rebased atop ("...: sa8295p-adp: disallow regulator mode switches") Looks good: Reviewed-by: Johan Hovold <johan+linaro@kernel.org> > arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts > index ca5f5ad32ce5..5b16ac76fefb 100644 > --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts > +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts > @@ -83,6 +83,9 @@ vreg_l3c: ldo3 { > regulator-max-microvolt = <1200000>; > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > regulator-allow-set-load; > + regulator-allowed-modes = > + <RPMH_REGULATOR_MODE_LPM > + RPMH_REGULATOR_MODE_HPM>; > }; > > vreg_l4c: ldo4 { > @@ -98,6 +101,9 @@ vreg_l6c: ldo6 { > regulator-max-microvolt = <1200000>; > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > regulator-allow-set-load; > + regulator-allowed-modes = > + <RPMH_REGULATOR_MODE_LPM > + RPMH_REGULATOR_MODE_HPM>; > }; > > vreg_l7c: ldo7 { > @@ -113,6 +119,9 @@ vreg_l10c: ldo10 { > regulator-max-microvolt = <2504000>; > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > regulator-allow-set-load; > + regulator-allowed-modes = > + <RPMH_REGULATOR_MODE_LPM > + RPMH_REGULATOR_MODE_HPM>; > }; > > vreg_l17c: ldo17 { > @@ -121,6 +130,9 @@ vreg_l17c: ldo17 { > regulator-max-microvolt = <2504000>; > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > regulator-allow-set-load; > + regulator-allowed-modes = > + <RPMH_REGULATOR_MODE_LPM > + RPMH_REGULATOR_MODE_HPM>; > }; > };
diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts index ca5f5ad32ce5..5b16ac76fefb 100644 --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts @@ -83,6 +83,9 @@ vreg_l3c: ldo3 { regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l4c: ldo4 { @@ -98,6 +101,9 @@ vreg_l6c: ldo6 { regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l7c: ldo7 { @@ -113,6 +119,9 @@ vreg_l10c: ldo10 { regulator-max-microvolt = <2504000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l17c: ldo17 { @@ -121,6 +130,9 @@ vreg_l17c: ldo17 { regulator-max-microvolt = <2504000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; };
This board uses RPMH, specifies "regulator-allow-set-load" for LDOs, but doesn't specify any modes with "regulator-allowed-modes". Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement get_optimum_mode(), not set_load()") the above meant that we were able to set either LPM or HPM mode. After that commit (and fixes [1]) we'll be stuck at the initial mode. Discussion of this has resulted in the decision that the old dts files were wrong and should be fixed to fully restore old functionality. Let's re-enable the old functionality by fixing the dts. [1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid Fixes: 519183af39b2 ("arm64: dts: qcom: add SA8540P and ADP") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> --- Changes in v2: - Rebased atop ("...: sa8295p-adp: disallow regulator mode switches") arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+)