| Message ID | 20221029051449.30678-3-manivannan.sadhasivam@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | sc8280xp-pmic updates and X13s thermal zone support | expand |
On 29.10.2022 07:14, Manivannan Sadhasivam wrote: > Add support for temperature alarm feature in the PM8280_{1/2} PMICs. > > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Konrad > arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi > index 24836b6b9bbc..5de47b1434a4 100644 > --- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi > @@ -33,6 +33,13 @@ pmc8280_1: pmic@1 { > #address-cells = <1>; > #size-cells = <0>; > > + pm8280_1_temp_alarm: temp-alarm@a00 { > + compatible = "qcom,spmi-temp-alarm"; > + reg = <0xa00>; > + interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; > + #thermal-sensor-cells = <0>; > + }; > + > pmc8280_1_gpios: gpio@8800 { > compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio"; > reg = <0x8800>; > @@ -78,6 +85,13 @@ pmc8280_2: pmic@3 { > #address-cells = <1>; > #size-cells = <0>; > > + pm8280_2_temp_alarm: temp-alarm@a00 { > + compatible = "qcom,spmi-temp-alarm"; > + reg = <0xa00>; > + interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; > + #thermal-sensor-cells = <0>; > + }; > + > pmc8280_2_gpios: gpio@8800 { > compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio"; > reg = <0x8800>;
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi index 24836b6b9bbc..5de47b1434a4 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi @@ -33,6 +33,13 @@ pmc8280_1: pmic@1 { #address-cells = <1>; #size-cells = <0>; + pm8280_1_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + pmc8280_1_gpios: gpio@8800 { compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio"; reg = <0x8800>; @@ -78,6 +85,13 @@ pmc8280_2: pmic@3 { #address-cells = <1>; #size-cells = <0>; + pm8280_2_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + pmc8280_2_gpios: gpio@8800 { compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio"; reg = <0x8800>;
Add support for temperature alarm feature in the PM8280_{1/2} PMICs. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+)