diff mbox series

[01/10] dt-bindings: pinctrl: qcom: add IPQ5332 pinctrl

Message ID 20230125104520.89684-2-quic_kathirav@quicinc.com (mailing list archive)
State Not Applicable
Headers show
Series Add minimal boot support for IPQ5332 | expand

Commit Message

Kathiravan Thirumoorthy Jan. 25, 2023, 10:45 a.m. UTC
From: Kathiravan T <quic_kathirav@quicinc.com>

Add device tree bindings for IPQ5332 TLMM block.

Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
---
 .../pinctrl/qcom,ipq5332-pinctrl.yaml         | 134 ++++++++++++++++++
 1 file changed, 134 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml

Comments

Krzysztof Kozlowski Jan. 25, 2023, 11:10 a.m. UTC | #1
On 25/01/2023 11:45, Kathiravan Thirumoorthy wrote:
> From: Kathiravan T <quic_kathirav@quicinc.com>
> 
> Add device tree bindings for IPQ5332 TLMM block.
> 
> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
> ---
>  .../pinctrl/qcom,ipq5332-pinctrl.yaml         | 134 ++++++++++++++++++
>  1 file changed, 134 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml
> new file mode 100644
> index 000000000000..d101ee04b8b7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml

Name matching compatible, please.

> @@ -0,0 +1,134 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5332-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm IPQ5332 TLMM pin controller
> +
> +maintainers:
> +  - Bjorn Andersson <andersson@kernel.org>
> +  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> +
> +description: |
> +  Top Level Mode Multiplexer pin controller in Qualcomm IPQ5332 SoC.
> +
> +allOf:
> +  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
> +
> +properties:
> +  compatible:
> +    const: qcom,ipq5332-tlmm
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts: true

missing maxItems

Rebase your patches on latest next and use the latest bindings and
drivers as starting point.

> +  interrupt-controller: true
> +  "#interrupt-cells": true
> +  gpio-controller: true
> +  "#gpio-cells": true
> +  gpio-ranges: true
> +  wakeup-parent: true
> +
> +  gpio-reserved-ranges:
> +    minItems: 1
> +    maxItems: 27
> +
> +  gpio-line-names:
> +    maxItems: 53

You have 54 GPIOs.

> +
> +patternProperties:
> +  "-state$":
> +    oneOf:
> +      - $ref: "#/$defs/qcom-ipq5332-tlmm-state"
> +      - patternProperties:
> +          "-pins$":
> +            $ref: "#/$defs/qcom-ipq5332-tlmm-state"
> +        additionalProperties: false
> +
> +$defs:
> +  qcom-ipq5332-tlmm-state:
> +    type: object
> +    description:
> +      Pinctrl node's client devices use subnodes for desired pin configuration.
> +      Client device subnodes use below standard properties.
> +    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
> +
> +    properties:
> +      pins:
> +        description:
> +          List of gpio pins affected by the properties specified in this
> +          subnode.
> +        items:
> +          pattern: "^gpio([0-9]|[1-4][0-9]|5[0-3])$"
> +        minItems: 1
> +        maxItems: 36
> +
> +      function:
> +        description:
> +          Specify the alternative function to be configured for the specified
> +          pins.
> +
> +        enum: [ PTA_0, PTA_2, PTA_1, atest_char, atest_char0, atest_char1,

1. lowercase only

2. order all these by name


> +                atest_char2, atest_char3, atest_tic, audio_pri, audio_pri0,
> +                audio_pri1, audio_sec, audio_sec0, audio_sec1, blsp0_i2c,
> +                blsp0_spi, blsp0_uart0, blsp0_uart1, blsp1_i2c0, blsp1_i2c1,
> +                blsp1_spi0, blsp1_spi1, blsp1_uart0, blsp1_uart1, blsp1_uart2,
> +                blsp2_i2c0, blsp2_i2c1, blsp2_spi, blsp2_spi0, blsp2_spi1,
> +                core_voltage, cri_trng0, cri_trng1, cri_trng2, cri_trng3,
> +                cxc_clk, cxc_data, dbg_out, gcc_plltest, gcc_tlmm, gpio,
> +                lock_det, mac0, mac1, mdc0, mdc1, mdio0, mdio1, pc, pcie0_clk,

Best regards,
Krzysztof
Kathiravan Thirumoorthy Jan. 25, 2023, 3:49 p.m. UTC | #2
On 1/25/2023 4:40 PM, Krzysztof Kozlowski wrote:
> On 25/01/2023 11:45, Kathiravan Thirumoorthy wrote:
>> From: Kathiravan T <quic_kathirav@quicinc.com>
>>
>> Add device tree bindings for IPQ5332 TLMM block.
>>
>> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
>> ---
>>   .../pinctrl/qcom,ipq5332-pinctrl.yaml         | 134 ++++++++++++++++++
>>   1 file changed, 134 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml
>> new file mode 100644
>> index 000000000000..d101ee04b8b7
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml
> Name matching compatible, please.


Sure, will rename it accordingly.


>
>> @@ -0,0 +1,134 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5332-pinctrl.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm IPQ5332 TLMM pin controller
>> +
>> +maintainers:
>> +  - Bjorn Andersson <andersson@kernel.org>
>> +  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> +
>> +description: |
>> +  Top Level Mode Multiplexer pin controller in Qualcomm IPQ5332 SoC.
>> +
>> +allOf:
>> +  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
>> +
>> +properties:
>> +  compatible:
>> +    const: qcom,ipq5332-tlmm
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  interrupts: true
> missing maxItems
>
> Rebase your patches on latest next and use the latest bindings and
> drivers as starting point.


Changes are based on v6.2-rc1.  I see the maxItems changes in 
linux-next. Will update this in V2.


>> +  interrupt-controller: true
>> +  "#interrupt-cells": true
>> +  gpio-controller: true
>> +  "#gpio-cells": true
>> +  gpio-ranges: true
>> +  wakeup-parent: true
>> +
>> +  gpio-reserved-ranges:
>> +    minItems: 1
>> +    maxItems: 27
>> +
>> +  gpio-line-names:
>> +    maxItems: 53
> You have 54 GPIOs.


Sorry, GPIO ranges are from 0-52, will update it in all places in V2.


>
>> +
>> +patternProperties:
>> +  "-state$":
>> +    oneOf:
>> +      - $ref: "#/$defs/qcom-ipq5332-tlmm-state"
>> +      - patternProperties:
>> +          "-pins$":
>> +            $ref: "#/$defs/qcom-ipq5332-tlmm-state"
>> +        additionalProperties: false
>> +
>> +$defs:
>> +  qcom-ipq5332-tlmm-state:
>> +    type: object
>> +    description:
>> +      Pinctrl node's client devices use subnodes for desired pin configuration.
>> +      Client device subnodes use below standard properties.
>> +    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
>> +
>> +    properties:
>> +      pins:
>> +        description:
>> +          List of gpio pins affected by the properties specified in this
>> +          subnode.
>> +        items:
>> +          pattern: "^gpio([0-9]|[1-4][0-9]|5[0-3])$"
>> +        minItems: 1
>> +        maxItems: 36
>> +
>> +      function:
>> +        description:
>> +          Specify the alternative function to be configured for the specified
>> +          pins.
>> +
>> +        enum: [ PTA_0, PTA_2, PTA_1, atest_char, atest_char0, atest_char1,
> 1. lowercase only
>
> 2. order all these by name


Ack.


>
>
>> +                atest_char2, atest_char3, atest_tic, audio_pri, audio_pri0,
>> +                audio_pri1, audio_sec, audio_sec0, audio_sec1, blsp0_i2c,
>> +                blsp0_spi, blsp0_uart0, blsp0_uart1, blsp1_i2c0, blsp1_i2c1,
>> +                blsp1_spi0, blsp1_spi1, blsp1_uart0, blsp1_uart1, blsp1_uart2,
>> +                blsp2_i2c0, blsp2_i2c1, blsp2_spi, blsp2_spi0, blsp2_spi1,
>> +                core_voltage, cri_trng0, cri_trng1, cri_trng2, cri_trng3,
>> +                cxc_clk, cxc_data, dbg_out, gcc_plltest, gcc_tlmm, gpio,
>> +                lock_det, mac0, mac1, mdc0, mdc1, mdio0, mdio1, pc, pcie0_clk,
> Best regards,
> Krzysztof


Thanks,

Kathiravan T.
Krzysztof Kozlowski Jan. 25, 2023, 4:20 p.m. UTC | #3
On 25/01/2023 16:49, Kathiravan Thirumoorthy wrote:
>>
>>> @@ -0,0 +1,134 @@
>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5332-pinctrl.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: Qualcomm IPQ5332 TLMM pin controller
>>> +
>>> +maintainers:
>>> +  - Bjorn Andersson <andersson@kernel.org>
>>> +  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>>> +
>>> +description: |
>>> +  Top Level Mode Multiplexer pin controller in Qualcomm IPQ5332 SoC.
>>> +
>>> +allOf:
>>> +  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
>>> +
>>> +properties:
>>> +  compatible:
>>> +    const: qcom,ipq5332-tlmm
>>> +
>>> +  reg:
>>> +    maxItems: 1
>>> +
>>> +  interrupts: true
>> missing maxItems
>>
>> Rebase your patches on latest next and use the latest bindings and
>> drivers as starting point.
> 
> 
> Changes are based on v6.2-rc1.  I see the maxItems changes in 
> linux-next. Will update this in V2.

Your patches cannot be based on v6.2-rc1. They won't even apply. You
miss entire development of last month.
> 
> 
>>> +  interrupt-controller: true
>>> +  "#interrupt-cells": true
>>> +  gpio-controller: true
>>> +  "#gpio-cells": true
>>> +  gpio-ranges: true
>>> +  wakeup-parent: true
>>> +
>>> +  gpio-reserved-ranges:
>>> +    minItems: 1
>>> +    maxItems: 27
>>> +
>>> +  gpio-line-names:
>>> +    maxItems: 53
>> You have 54 GPIOs.
> 
> 
> Sorry, GPIO ranges are from 0-52, will update it in all places in V2.

Ah, then the gpio pattern needs a fix.


Best regards,
Krzysztof
Kathiravan Thirumoorthy Jan. 25, 2023, 4:38 p.m. UTC | #4
On 1/25/2023 9:50 PM, Krzysztof Kozlowski wrote:
> On 25/01/2023 16:49, Kathiravan Thirumoorthy wrote:
>>>> @@ -0,0 +1,134 @@
>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>>> +%YAML 1.2
>>>> +---
>>>> +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5332-pinctrl.yaml#
>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>>> +
>>>> +title: Qualcomm IPQ5332 TLMM pin controller
>>>> +
>>>> +maintainers:
>>>> +  - Bjorn Andersson <andersson@kernel.org>
>>>> +  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>>>> +
>>>> +description: |
>>>> +  Top Level Mode Multiplexer pin controller in Qualcomm IPQ5332 SoC.
>>>> +
>>>> +allOf:
>>>> +  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
>>>> +
>>>> +properties:
>>>> +  compatible:
>>>> +    const: qcom,ipq5332-tlmm
>>>> +
>>>> +  reg:
>>>> +    maxItems: 1
>>>> +
>>>> +  interrupts: true
>>> missing maxItems
>>>
>>> Rebase your patches on latest next and use the latest bindings and
>>> drivers as starting point.
>>
>> Changes are based on v6.2-rc1.  I see the maxItems changes in
>> linux-next. Will update this in V2.
> Your patches cannot be based on v6.2-rc1. They won't even apply. You
> miss entire development of last month.


Hmmm, Will use linux-next/master as base hereafter.


>>
>>>> +  interrupt-controller: true
>>>> +  "#interrupt-cells": true
>>>> +  gpio-controller: true
>>>> +  "#gpio-cells": true
>>>> +  gpio-ranges: true
>>>> +  wakeup-parent: true
>>>> +
>>>> +  gpio-reserved-ranges:
>>>> +    minItems: 1
>>>> +    maxItems: 27
>>>> +
>>>> +  gpio-line-names:
>>>> +    maxItems: 53
>>> You have 54 GPIOs.
>>
>> Sorry, GPIO ranges are from 0-52, will update it in all places in V2.
> Ah, then the gpio pattern needs a fix.


Yup, will take care of that as well in V2.


>
>
> Best regards,
> Krzysztof
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml
new file mode 100644
index 000000000000..d101ee04b8b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-pinctrl.yaml
@@ -0,0 +1,134 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5332-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm IPQ5332 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description: |
+  Top Level Mode Multiplexer pin controller in Qualcomm IPQ5332 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,ipq5332-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 27
+
+  gpio-line-names:
+    maxItems: 53
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-ipq5332-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-ipq5332-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-ipq5332-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          pattern: "^gpio([0-9]|[1-4][0-9]|5[0-3])$"
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ PTA_0, PTA_2, PTA_1, atest_char, atest_char0, atest_char1,
+                atest_char2, atest_char3, atest_tic, audio_pri, audio_pri0,
+                audio_pri1, audio_sec, audio_sec0, audio_sec1, blsp0_i2c,
+                blsp0_spi, blsp0_uart0, blsp0_uart1, blsp1_i2c0, blsp1_i2c1,
+                blsp1_spi0, blsp1_spi1, blsp1_uart0, blsp1_uart1, blsp1_uart2,
+                blsp2_i2c0, blsp2_i2c1, blsp2_spi, blsp2_spi0, blsp2_spi1,
+                core_voltage, cri_trng0, cri_trng1, cri_trng2, cri_trng3,
+                cxc_clk, cxc_data, dbg_out, gcc_plltest, gcc_tlmm, gpio,
+                lock_det, mac0, mac1, mdc0, mdc1, mdio0, mdio1, pc, pcie0_clk,
+                pcie0_wake, pcie1_clk, pcie1_wake, pcie2_clk, pcie2_wake,
+                pll_test, prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, pwm0,
+                pwm1, pwm2, pwm3, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1,
+                qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, qdss_cti_trig_out_a0,
+                qdss_cti_trig_out_a1, qdss_cti_trig_out_b0,
+                qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_traceclk_b,
+                qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a,
+                qdss_tracedata_b, qspi_data, qspi_clk, qspi_cs, resout, rx0,
+                rx1, sdc_data, sdc_clk, sdc_cmd, tsens_max, wci0, wci1, wci10,
+                wci11, wci2, wci3, wci4, wci5, wci6, wci7, wci8, wci9, wsi_clk,
+                wsi_clk3, wsi_data, wsi_data3, wsis_reset, xfem0, xfem1, xfem2,
+                xfem3, xfem4, xfem5, xfem6, xfem7 ]
+
+      bias-pull-down: true
+      bias-pull-up: true
+      bias-disable: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tlmm: pinctrl@1000000 {
+        compatible = "qcom,ipq5332-tlmm";
+        reg = <0x01000000 0x300000>;
+        gpio-controller;
+        #gpio-cells = <0x2>;
+        gpio-ranges = <&tlmm 0 0 53>;
+        interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <0x2>;
+
+        serial0-state {
+            pins = "gpio18", "gpio19";
+            function = "blsp0_uart0";
+            drive-strength = <8>;
+            bias-pull-up;
+        };
+    };