diff mbox series

[v2,1/4] arm64: dts: qcom: x1e80100: Add SPMI support

Message ID 20240221-x1e80100-dts-smb2360-v2-1-037d183cc021@linaro.org (mailing list archive)
State Superseded
Headers show
Series arm64: dts: qcom: x1e80100: Add support for eUSB2 repeaters | expand

Commit Message

Abel Vesa Feb. 21, 2024, 2:38 p.m. UTC
The X1E80100 platform implements the v7 SPMI arbiter, which means it
implements two separate buses. The difference, when compared to existing
platforms that also implement v7 SPMI arbiter, is that this is the first
platform that actually has boards with secondary bus populated with some
PMICs. This is why it needs to have 2 separate buses as child nodes of
the arbiter.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 arch/arm64/boot/dts/qcom/x1e80100.dtsi | 42 ++++++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index 8e517f76189e..d1c012fd71e6 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -4221,6 +4221,48 @@  aoss_qmp: power-management@c300000 {
 			#clock-cells = <0>;
 		};
 
+		spmi: arbiter@c400000 {
+			compatible = "qcom,spmi-pmic-arb-v7";
+			reg = <0 0x0c400000 0 0x3000>,
+			      <0 0x0c500000 0 0x400000>,
+			      <0 0x0c440000 0 0x80000>;
+			reg-names = "core", "chnls", "obsrvr";
+
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			spmi_bus0: spmi@0 {
+				reg = <0 0x0c42d000 0 0x4000>,
+				      <0 0x0c4c0000 0 0x10000>;
+				reg-names = "cnfg", "intr";
+
+				interrupt-names = "periph_irq";
+				interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <4>;
+
+				#address-cells = <2>;
+				#size-cells = <0>;
+			};
+
+			spmi_bus1: spmi@1 {
+				reg = <0 0x0c432000 0 0x4000>,
+				      <0 0x0c4d0000 0 0x10000>;
+				reg-names = "cnfg", "intr";
+
+				interrupt-names = "periph_irq";
+				interrupts-extended = <&pdc 3 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <4>;
+
+				#address-cells = <2>;
+				#size-cells = <0>;
+			};
+		};
 
 		tlmm: pinctrl@f100000 {
 			compatible = "qcom,x1e80100-tlmm";